In Horde_Crypt before 2.7.6, as used in Horde Groupware Webmail Edition through 5.2.17, OS Command Injection can occur if the attacker is an authenticated Horde Webmail user, has PGP features enabled in their preferences, and attempts to encrypt an email addressed to a maliciously crafted email address.

dnslookup.cgi on NETGEAR DGN2200 devices with firmware through 10.0.0.50 allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the host_name field of an HTTP POST request, a different vulnerability than CVE-2017-6077.

Ruckus Networks Unleashed AP firmware releases before 200.6.10.1.x and Ruckus Networks Zone Director firmware releases 10.1.0.0.x, 9.10.2.0.x, 9.12.3.0.x, 9.13.3.0.x, 10.0.1.0.x or before contain authenticated Root Command Injection in the CLI that could allow authenticated valid users to execute privileged commands on the respective systems.

NfSen before 1.3.8 allows remote attackers to execute arbitrary OS commands via shell metacharacters in the customfmt parameter (aka the "Custom output format" field).

An issue was discovered in Trend Micro InterScan Messaging Security (Virtual Appliance) 9.1-1600. An authenticated user can execute a terminal command in the context of the web server user (which is root). Besides, the default installation of IMSVA comes with default administrator credentials. The saveCert.imss endpoint takes several user inputs and performs blacklisting. After that, it uses them as arguments to a predefined operating-system command without proper sanitization. However, because of an improper blacklisting rule, it's possible to inject arbitrary commands into it.

Ruckus Networks Solo APs firmware releases R110.x or before and Ruckus Networks SZ managed APs firmware releases R5.x or before contain authenticated Root Command Injection in the web-GUI that could allow authenticated valid users to execute privileged commands on the respective systems.

In version 3.5 and prior of Cambium Networks ePMP firmware, a lack of input sanitation for certain parameters on the web management console allows any authenticated user (including the otherwise low-privilege readonly user) to inject shell meta-characters as part of a specially-crafted POST request to the get_chart function and run OS-level commands, effectively as root.

In Ubiquiti Networks EdgeSwitch X v1.1.0 and prior, an authenticated user can execute arbitrary shell commands over the SSH interface bypassing the CLI interface, which allow them to escalate privileges to root.

cgi-bin/cgiServer.exx in Yealink VoIP Phone SIP-T38G allows remote authenticated users to execute arbitrary commands by calling the system method in the body of a request, as demonstrated by running unauthorized services, changing directory permissions, and modifying files.

An exploitable vulnerability exists in the /api/CONFIG/restore functionality of Circle with Disney running firmware 2.0.1. Specially crafted network packets can cause an OS command injection. An attacker can send an HTTP request trigger this vulnerability.

An exploitable vulnerability exists in the notifications functionality of Circle with Disney running firmware 2.0.1. Specially crafted network packets can cause an OS command injection. An attacker can send an HTTP request to trigger this vulnerability.

An exploitable vulnerability exists in the /api/CONFIG/backup functionality of Circle with Disney. Specially crafted network packets can cause an OS command injection. An attacker can send an HTTP request to trigger this vulnerability.

The web framework in Cisco Identity Services Engine (ISE) 1.0 and 1.1.0 before 1.1.0.665-5, 1.1.1 before 1.1.1.268-7, 1.1.2 before 1.1.2.145-10, 1.1.3 before 1.1.3.124-7, 1.1.4 before 1.1.4.218-7, and 1.2 before 1.2.0.899-2 allows remote authenticated users to execute arbitrary commands via a crafted session on TCP port 443, aka Bug ID CSCuh81511.

WG-C10 v3.0.79 and earlier allows an attacker to execute arbitrary OS commands via unspecified vectors.

The ZyXEL P660HN-T1A v2 TCLinux Fw #7.3.37.6 router distributed by TrueOnline has a command injection vulnerability in the Remote System Log forwarding function, which is only accessible by an authenticated user. The vulnerability is in the logSet.asp page and can be exploited through the ServerIP parameter. Authentication can be achieved by exploiting CVE-2017-18371.

In app/Controller/ServersController.php in MISP 2.4.87, a server setting permitted the override of a path variable on certain Red Hed Enterprise Linux and CentOS systems (where rh_shell_fix was enabled), and consequently allowed site admins to inject arbitrary OS commands. The impact is limited by the setting being only accessible to the site administrator.

An exploitable command injection vulnerability exists in encrypted diagnostic script functionality of the Moxa AWK-3131A firmware version 1.13. A specially crafted diagnostic script file can cause arbitrary busybox commands to be executed, resulting in remote control over the device. An attacker can send diagnostic while authenticated as a low privilege user to trigger this vulnerability.

TP-Link TL-WVR and TL-WAR devices allow remote authenticated users to execute arbitrary commands via shell metacharacters in the interface field of an admin/wportal command to cgi-bin/luci, related to the get_device_byif function in /usr/lib/lua/luci/controller/admin/wportal.lua in uhttpd.

Access analysis CGI An-Analyzer released in 2019 June 24 and earlier allows remote authenticated attackers to execute arbitrary OS commands via the Management Page.

The Billion 5200W-T TCLinux Fw $7.3.8.0 v008 130603 router distributed by TrueOnline has a command injection vulnerability in the Time Setting function, which is only accessible by an authenticated user. The vulnerability is in the tools_time.asp page and can be exploited through the uiViewSNTPServer parameter. Authentication can be achieved by exploiting CVE-2017-18373.

TP-Link TL-WVR and TL-WAR devices allow remote authenticated users to execute arbitrary commands via shell metacharacters in the interface field of an admin/dhcps command to cgi-bin/luci, related to the zone_get_iface_bydev function in /usr/lib/lua/luci/controller/admin/dhcps.lua in uhttpd.

In Ubiquiti Networks EdgeSwitch X v1.1.0 and prior, a privileged user can execute arbitrary shell commands over the SSH CLI interface. This allows to execute shell commands under the root user.

lib/rrd.php in Cacti 1.1.27 allows remote authenticated administrators to execute arbitrary OS commands via the path_rrdtool parameter in an action=save request to settings.php.

An exploitable command injection vulnerability exists in the hostname functionality of the Moxa AWK-3131A firmware version 1.13. A specially crafted entry to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send various authenticated requests to trigger this vulnerability.

A command injection vulnerability is present in the web management interface of ArubaOS that permits an authenticated user to execute arbitrary commands on the underlying operating system. A malicious administrator could use this ability to install backdoors or change system configuration in a way that would not be logged. This vulnerability only affects ArubaOS 8.x.

The web framework in Cisco WAAS Software before 4.x and 5.x before 5.0.3e, 5.1.x before 5.1.1c, and 5.2.x before 5.2.1; Cisco ACNS Software 4.x and 5.x before 5.5.29.2; Cisco ECDS Software 2.x before 2.5.6; Cisco CDS-IS Software 2.x before 2.6.3.b50 and 3.1.x before 3.1.2b54; Cisco VDS-IS Software 3.2.x before 3.2.1.b9; Cisco VDS-SB Software 1.x before 1.1.0-b96; Cisco VDS-OE Software 1.x before 1.0.1; and Cisco VDS-OS Software 1.x in central-management mode allows remote authenticated users to execute arbitrary commands by appending crafted strings to values in GUI fields, aka Bug IDs CSCug40609, CSCug48855, CSCug48921, CSCug48872, CSCuh21103, CSCuh21020, and CSCug56790.

ginkgosnmp.inc in HP System Management Homepage (SMH) allows remote authenticated users to execute arbitrary commands via shell metacharacters in the PATH_INFO to smhutil/snmpchp.php.en.

An exploitable command injection vulnerability exists in the cloud connectivity feature of WAGO PFC200. An attacker can inject operating system commands into any of the parameter values contained in the firmware update command. This affects WAGO PFC200 Firmware version 03.02.02(14), version 03.01.07(13), and version 03.00.39(12)

SQL injection vulnerability in the Help Desk application in Wave EMBASSY Remote Administration Server (ERAS) allows remote authenticated users to execute arbitrary SQL commands via the ct100$4MainController$TextBoxSearchValue parameter (aka the search field), leading to execution of operating-system commands.

The Nexus Yum Repository Plugin in v2 is vulnerable to Remote Code Execution when instances using CommandLineExecutor.java are supplied vulnerable data, such as the Yum Configuration Capability.

In OTRS 6.0.x up to and including 6.0.1, OTRS 5.0.x up to and including 5.0.24, and OTRS 4.0.x up to and including 4.0.26, an attacker who is logged into OTRS as an agent can manipulate form parameters (related to PGP) and execute arbitrary shell commands with the permissions of the OTRS or web server user.

NetApp OnCommand System Manager 2.1 and earlier allows remote attackers to inject arbitrary commands in the Halt/Reboot interface.

A Command Injection vulnerability exists in Vivotek PT7135 IP Cameras 0300a and 0400a via the system.ntp parameter to the farseer.out binary file, which cold let a malicious user execute arbitrary code.

A vulnerability in the Redfish protocol of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject and execute arbitrary commands with root privileges on an affected device. The vulnerability is due to insufficient validation of user-supplied input by the affected software. An attacker could exploit this vulnerability by sending crafted authenticated commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary commands on an affected device with root privileges.

Artica Pandora FMS 7.44 allows remote command execution via the events feature.

ROOT version 6.9.03 and below is vulnerable to an authenticated shell metacharacter injection in the rootd daemon resulting in remote code execution

TP-Link TL-WVR, TL-WAR, TL-ER, and TL-R devices allow remote authenticated users to execute arbitrary commands via shell metacharacters in the iface field of an admin/diagnostic command to cgi-bin/luci, related to the zone_get_effect_devices function in /usr/lib/lua/luci/controller/admin/diagnostic.lua in uhttpd.

rConfig 3.9.4 and earlier allows authenticated code execution (of system commands) by sending a forged GET request to lib/ajaxHandlers/ajaxAddTemplate.php or lib/ajaxHandlers/ajaxEditTemplate.php.

A security-check flaw was found in the way the Heketi 5 server API handled user requests. An authenticated Heketi user could send specially crafted requests to the Heketi server, resulting in remote command execution as the user running Heketi server and possibly privilege escalation.

On SuperMicro X8STi-F motherboards with IPMI firmware 2.06 and BIOS 02.68, the Virtual Media feature allows OS Command Injection by authenticated attackers who can send HTTP requests to the IPMI IP address. This requires a POST to /rpc/setvmdrive.asp with shell metacharacters in ShareHost or ShareName. The attacker can achieve a persistent backdoor.

Certain TP-Link devices allow Command Injection. This affects NC260 1.5.2 build 200304 and NC450 1.5.3 build 200304.

All versions up to V1.1.10P3T18 of ZTE ZXHN F670 product are impacted by command injection vulnerability. Due to insufficient parameter validation check, an authorized user can exploit this vulnerability to take control of user router system.

Polycom HDX Video End Points before 3.0.4 and UC APL before 2.7.1.J allows remote authenticated users to execute arbitrary commands as demonstrated by a ; (semicolon) to the ping command feature.

An exploitable command injection vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP POST can cause a privilege escalation resulting in root shell. An attacker can inject OS commands into the openvpnServer0_tmp= parameter in the "/goform/net\_Web\_get_value" uri to trigger this vulnerability.

IBM Spectrum Scale 4.2 and 5.0 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 172093.

trixbox 2.8.0.4 has OS command injection via shell metacharacters in the lang parameter to /maint/modules/home/index.php.

IBM Security Access Manager Appliance 9.0.3 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 128372.

A vulnerability classified as critical was found in Ruijie RG-EG350 up to 20240318. Affected by this vulnerability is the function setAction of the file /itbox_pi/networksafe.php?a=set of the component HTTP POST Request Handler. The manipulation of the argument bandwidth leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-257977 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Improper neutralization of special elements used in an OS command in SYNO.Core.Network.PPPoE in Synology DiskStation Manager (DSM) before 6.2.3-25426-3 allows remote authenticated users to execute arbitrary code via realname parameter.