A vulnerability was found in D-Link DIR-600L up to 2.07B01 and classified as critical. This issue affects the function formSetLog. The manipulation of the argument host leads to buffer overflow. The attack may be initiated remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as critical was found in Tenda AC10 16.03.10.13. Affected by this vulnerability is the function FUN_0044db3c of the file /goform/fast_setting_wifi_set. The manipulation of the argument timeZone leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in Netgear EX6200 1.0.3.94 and classified as critical. Affected by this vulnerability is the function sub_47F7C. The manipulation of the argument host leads to buffer overflow. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in TOTOLINK A702R, A3002R and A3002RU 3.0.0-B20230809.1615. This vulnerability affects unknown code of the file /boafrm/formDMZ of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical was found in Netgear EX6120 1.0.0.68. Affected by this vulnerability is the function fwAcosCgiInbound. The manipulation of the argument host leads to buffer overflow. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Netgear JWNR2000v2 1.0.0.11. It has been classified as critical. Affected is the function sub_4238E8. The manipulation of the argument host leads to buffer overflow. It is possible to launch the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

The affected product’s code base doesn’t properly control arguments for specific functions, which could lead to a stack overflow.

Stack-based buffer overflow in Live for Speed 0.5X10 and earlier allows remote authenticated users to cause a denial of service (client crash) and possibly execute arbitrary code via a long skin name.

Buffer overflow in the C_SAPGPARAM function in the NetWeaver Dispatcher in SAP KERNEL 7.00 (7000.52.12.34966) and 7.40 (7400.12.21.30308) allows remote authenticated users to cause a denial of service or possibly execute arbitrary code via unspecified vectors, aka SAP Security Note 2063369.

Heap-based buffer overflow in chrony before 1.31.1 allows remote authenticated users to cause a denial of service (chronyd crash) or possibly execute arbitrary code by configuring the (1) NTP or (2) cmdmon access with a subnet size that is indivisible by four and an address with a nonzero bit in the subnet remainder.

Multiple buffer overflows in the IMAP service (imapd32.exe) in Ipswitch IMail Server 2006 before 2006.21 allow remote authenticated users to execute arbitrary code via the (1) Search or (2) Search Charset command.

A vulnerability was found in Tenda W12 and i24 3.0.0.4(2887)/3.0.0.5(3644). It has been rated as critical. This issue affects the function cgiSysScheduleRebootSet of the file /bin/httpd. The manipulation of the argument rebootDate leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in Tenda AC10 16.03.10.13. Affected is the function FUN_0046AC38 of the file /goform/WifiExtraSet. The manipulation of the argument wpapsk_crypto leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was discovered in SPICE before 0.13.90 in the server's protocol handling. An authenticated attacker could send crafted messages to the SPICE server causing a heap overflow leading to a crash or possible code execution.

Buffer overflow in SYS.DBMS_DRS in Oracle Database 9.2.0.7 and 10.1.0.4 allows remote authenticated users to cause a denial of service (crash) or execute arbitrary code via the GET_PROPERTY function in SYS.DBMS_DRS, aka DB03.

Buffer overflow in the SAP NetWeaver Dispatcher in SAP Kernel 7.00 32-bit and 7.40 64-bit allows remote authenticated users to cause a denial of service or possibly execute arbitrary code via unspecified vectors, related to the ABAP VM, aka SAP Note 2059734.

Buffer overflow in the SAP NetWeaver Dispatcher in SAP Kernel 7.00 32-bit and 7.40 64-bit allows remote authenticated users to cause a denial of service or possibly execute arbitrary code via unspecified vectors, related to the Spool System, aka SAP Note 2061271.

Multiple stack-based buffer overflows in the File Transfer feature in rfbserver.c in LibVNCServer 0.9.9 and earlier allow remote authenticated users to cause a denial of service (crash) and possibly execute arbitrary code via a (1) long file or (2) directory name or the (3) FileTime attribute in a rfbFileTransferOffer message.

A vulnerability in the web UI of the Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to execute arbitrary commands within the affected device.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

Microsoft Windows Vista SP2, Windows Server 2008 SP2 and R2 SP1, Windows 7 SP1, Windows 8.1, Windows Server 2012 Gold and R2, Windows RT 8.1, and Windows 10 Gold, 1511, and 1607 allow remote authenticated users to execute arbitrary code by leveraging a domain account to make a crafted request, aka "Windows Remote Code Execution Vulnerability."

A flaw was found in samba versions 4.0.0 to 4.5.2. The Samba routine ndr_pull_dnsp_name contains an integer wrap problem, leading to an attacker-controlled memory overwrite. ndr_pull_dnsp_name parses data from the Samba Active Directory ldb database. Any user who can write to the dnsRecord attribute over LDAP can trigger this memory corruption. By default, all authenticated LDAP users can write to the dnsRecord attribute on new DNS objects. This makes the defect a remote privilege escalation.

Multiple buffer overflows in IBM Rational ClearCase 7.x before 7.1.2.13, 8.0.0.x before 8.0.0.10, and 8.0.1.x before 8.0.1.3 allow remote authenticated users to obtain privileged access via unspecified vectors.

Buffer overflow in disp+work.exe 7000.52.12.34966 and 7200.117.19.50294 in the Dispatcher in SAP NetWeaver 7.00 and 7.20 allows remote authenticated users to cause a denial of service or execute arbitrary code via unspecified vectors.

Multiple stack-based buffer overflows in PostgreSQL before 8.4.20, 9.0.x before 9.0.16, 9.1.x before 9.1.12, 9.2.x before 9.2.7, and 9.3.x before 9.3.3 allow remote authenticated users to cause a denial of service (crash) or possibly execute arbitrary code via vectors related to an incorrect MAXDATELEN constant and datetime values involving (1) intervals, (2) timestamps, or (3) timezones, a different vulnerability than CVE-2014-0065.

Heap-based buffer overflow in rsync in Mac OS X 10.4 through 10.4.5 allows remote authenticated users to execute arbitrary code via long extended attributes.

Multiple stack-based buffer overflows in Icinga before 1.8.5, 1.9 before 1.9.4, and 1.10 before 1.10.2 allow remote authenticated users to cause a denial of service (crash) and possibly execute arbitrary code via a long string to the (1) display_nav_table, (2) page_limit_selector, (3) print_export_link, or (4) page_num_selector function in cgi/cgiutils.c; (5) status_page_num_selector function in cgi/status.c; or (6) display_command_expansion function in cgi/config.c. NOTE: this can be exploited without authentication by leveraging CVE-2013-7107.

Multiple buffer overflows in PostgreSQL before 8.4.20, 9.0.x before 9.0.16, 9.1.x before 9.1.12, 9.2.x before 9.2.7, and 9.3.x before 9.3.3 allow remote authenticated users to have unspecified impact and attack vectors, a different vulnerability than CVE-2014-0063.

Buffer overflow in certain client utilities in OpenAFS before 1.6.2 allows remote authenticated users to cause a denial of service (crash) and possibly execute arbitrary code via a long fileserver ACL entry.

Stack-based buffer overflow in the receive_tcppacket function in net_packet.c in tinc before 1.0.21 and 1.1 before 1.1pre7 allows remote authenticated peers to cause a denial of service (crash) or possibly execute arbitrary code via a large TCP packet.

Multiple buffer overflows in gram.y for PostgreSQL 8.0.1 and earlier may allow attackers to execute arbitrary code via (1) a large number of variables in a SQL statement being handled by the read_sql_construct function, (2) a large number of INTO variables in a SELECT statement being handled by the make_select_stmt function, (3) a large number of arbitrary variables in a SELECT statement being handled by the make_select_stmt function, and (4) a large number of INTO variables in a FETCH statement being handled by the make_fetch_stmt function, a different set of vulnerabilities than CVE-2005-0245.

Heap-based buffer overflow in the substr function in parsing.c in cgit 0.9.0.3 and earlier allows remote authenticated users to cause a denial of service (crash) and possibly execute arbitrary code via an empty username in the "Author" field in a commit.

Buffer overflow in the ParseCommand function in hpgl-input.c in the hpgltops program for CUPS 1.1.22 allows remote attackers to execute arbitrary code via a crafted HPGL file.

Stack-based buffer overflow in NWFTPD.nlm before 5.10.01 in the FTP server in Novell NetWare 5.1 through 6.5 SP8 allows remote authenticated users to cause a denial of service (daemon crash) or possibly execute arbitrary code via a long (1) MKD, (2) RMD, (3) RNFR, or (4) DELE command.

A memory corruption issue was addressed with improved validation. This issue affected versions prior to iOS 12, macOS Mojave 10.14, tvOS 12, watchOS 5.

Stack-based buffer overflow in the acl_get function in Oracle MySQL 5.5.19 and other versions through 5.5.28, and 5.1.53 and other versions through 5.1.66, and MariaDB 5.5.2.x before 5.5.28a, 5.3.x before 5.3.11, 5.2.x before 5.2.13 and 5.1.x before 5.1.66, allows remote authenticated users to execute arbitrary code via a long argument to the GRANT FILE command.

An exploitable remote code execution vulnerability exists in the HTTP header-parsing function of the TP-Link TL-R600VPN HTTP Server. A specially crafted HTTP request can cause a buffer overflow, resulting in remote code execution on the device. An attacker can send an authenticated HTTP request to trigger this vulnerability.

Stack-based buffer overflow in the bgp_route_refresh_receive function in bgp_packet.c in bgpd in Quagga before 0.99.17 allows remote authenticated users to cause a denial of service (daemon crash) or possibly execute arbitrary code via a malformed Outbound Route Filtering (ORF) record in a BGP ROUTE-REFRESH (RR) message.

A vulnerability, which was classified as critical, was found in Tenda CH22 1.0.0.1. This affects the function formNatlimit of the file /goform/Natlimit. The manipulation of the argument page leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in TOTOLINK N302R Plus up to 3.4.0-B20201028 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /boafrm/formFilter of the component HTTP POST Request Handler. The manipulation of the argument url leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in TOTOLINK N302R Plus up to 3.4.0-B20201028. Affected is an unknown function of the file /boafrm/formPortFw of the component HTTP POST Request Handler. The manipulation of the argument service_type leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical has been found in Tenda AC18 15.03.05.05. Affected is the function formsetreboottimer of the file /goform/SetSysAutoRebbotCfg. The manipulation of the argument rebootTime leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, has been found in Tenda CH22 1.0.0.1. This issue affects the function formaddUserName of the file /goform/addUserName. The manipulation of the argument Password leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in TOTOLINK X15 1.0.0-B20230714.1105. This affects the function formMapReboot of the file /boafrm/formMapReboot. The manipulation of the argument deviceMacAddr leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in Tenda AC18 15.03.05.05. Affected by this vulnerability is the function fromadvsetlanip of the file /goform/AdvSetLanip. The manipulation of the argument lanMask leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Tenda RX3 16.03.13.11_multi_TDE01. It has been rated as critical. This issue affects the function save_staticroute_data of the file /goform/SetStaticRouteCfg. The manipulation of the argument list leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been declared as critical. Affected by this vulnerability is the function setSystemEmail of the file /setSystemEmail. The manipulation of the argument EmailSMTPPortNumber leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, was found in Tenda AC10 up to 15.03.06.47. This affects the function formSetPPTPServer of the file /goform/SetPptpServerCfg of the component HTTP Handler. The manipulation of the argument startIp/endIp leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical has been found in D-Link DCS-5020L 1.01_B2. This affects the function websReadEvent of the file /rame/ptdc.cgi. The manipulation of the argument Authorization leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Buffer overflows in (1) circle_poly, (2) path_encode and (3) path_add (also incorrectly identified as path_addr) for PostgreSQL 7.2.3 and earlier allow attackers to cause a denial of service and possibly execute arbitrary code, possibly as a result of an integer overflow.