CallManager Express (CME) on Cisco IOS before 15.0(1)XA allows remote authenticated users to cause a denial of service (device crash) by using an extension mobility (EM) phone to interact with the menu for SNR number changes, aka Bug ID CSCta63555.

Cisco IOS 12.0 through 12.4, when IP-based tunnels and the Cisco Express Forwarding feature are enabled, allows remote attackers to cause a denial of service (device reload) via a malformed packet that is not properly handled during switching from one tunnel to a second tunnel, aka Bug IDs CSCsh97579 and CSCsq31776.

Unspecified vulnerability in the SNMPv2c implementation in Cisco ACE Application Control Engine Module for Catalyst 6500 Switches and 7600 Routers before A2(1.3) and Cisco ACE 4710 Application Control Engine Appliance before A3(2.1) allows remote attackers to cause a denial of service (device reload) via a crafted SNMPv1 packet.

The SNMP module in Cisco IOS XE 3.5E allows remote authenticated users to cause a denial of service (device reload) by polling frequently, aka Bug ID CSCug65204.

The IKEv2 client and initiator implementations in Cisco IOS 15.5(3)M and IOS XE allow remote IKEv2 servers to cause a denial of service (device reload) via crafted IKEv2 packets, aka Bug ID CSCux97540.

The web framework on Cisco Wireless LAN Controller (WLC) devices does not properly validate configuration parameters, which allows remote authenticated users to cause a denial of service via a crafted HTTP request, aka Bug ID CSCuh81011.

A vulnerability in the Java Management Extensions (JMX) component of Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected system. This vulnerability is due to an unsecured TCP/IP port. An attacker could exploit this vulnerability by accessing the port and restarting the JMX process. A successful exploit could allow the attacker to cause a DoS condition on an affected system.

A vulnerability in the software cryptography module of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker or an unauthenticated attacker in a man-in-the-middle position to cause an unexpected reload of the device that results in a denial of service (DoS) condition. The vulnerability is due to a logic error in how the software cryptography module handles specific types of decryption errors. An attacker could exploit this vulnerability by sending malicious packets over an established IPsec connection. A successful exploit could cause the device to crash, forcing it to reload. Important: Successful exploitation of this vulnerability would not cause a compromise of any encrypted data. Note: This vulnerability affects only Cisco ASA Software Release 9.16.1 and Cisco FTD Software Release 7.0.0.

A vulnerability in filesystem usage management for Cisco Firepower Device Manager (FDM) Software could allow an authenticated, remote attacker to exhaust filesystem resources, resulting in a denial of service (DoS) condition on an affected device. This vulnerability is due to the insufficient management of available filesystem resources. An attacker could exploit this vulnerability by uploading files to the device and exhausting available filesystem resources. A successful exploit could allow the attacker to cause database errors and cause the device to become unresponsive to web-based management. Manual intervention is required to free filesystem resources and return the device to an operational state.

A vulnerability in the REST API of Cisco Managed Services Accelerator (MSX) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to the way that the affected software logs certain API requests. An attacker could exploit this vulnerability by sending a flood of crafted API requests to an affected device. A successful exploit could allow the attacker to cause a DoS condition on the affected device.

A vulnerability in the Simple Network Management Protocol (SNMP) implementation in Cisco ASR 920 Series Aggregation Services Router model ASR920-12SZ-IM could allow an authenticated, remote attacker to cause the device to reload. The vulnerability is due to incorrect handling of data that is returned for Cisco Discovery Protocol queries to SNMP. An attacker could exploit this vulnerability by sending a request for Cisco Discovery Protocol information by using SNMP. An exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in the Cisco Webex Teams client for Windows could allow an authenticated, remote attacker to cause the client to crash, resulting in a denial of service (DoS) condition. The attacker needs a valid developer account to exploit this vulnerability. The vulnerability is due to insufficient input validation when processing received adaptive cards. The attacker could exploit this vulnerability by sending an adaptive card with malicious content to an existing user of the Cisco Webex Teams client for Windows. A successful exploit could allow the attacker to cause the targeted user's client to crash continuously. This vulnerability was introduced in Cisco Webex Teams client for Windows Release 3.0.13131.

A vulnerability in the Secure Shell (SSH) server code of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to cause an affected device to reload. The vulnerability is due to an internal state not being represented correctly in the SSH state machine, which leads to an unexpected behavior. An attacker could exploit this vulnerability by creating an SSH connection to an affected device and using a specific traffic pattern that causes an error condition within that connection. A successful exploit could allow an attacker to cause the device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in the management REST API of Cisco Industrial Network Director (IND) could allow an authenticated, remote attacker to cause the CPU utilization to increase to 100 percent, resulting in a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of requests sent to the REST API. An attacker could exploit this vulnerability by sending a crafted request to the REST API. A successful exploit could allow the attacker to cause a permanent DoS condition that is due to high CPU utilization. Manual intervention may be required to recover the Cisco IND.

A vulnerability in the IPSec decryption routine of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to buffer exhaustion that occurs while traffic on a configured IPsec tunnel is being processed. An attacker could exploit this vulnerability by sending traffic to an affected device that has a maximum transmission unit (MTU) of 1800 bytes or greater. A successful exploit could allow the attacker to cause the device to reload. To exploit this vulnerability, the attacker may need access to the trusted network where the affected device is in order to send specific packets to be processed by the device. All network devices between the attacker and the affected device must support an MTU of 1800 bytes or greater. This access requirement could limit the possibility of a successful exploit.

A vulnerability in the NETCONF over SSH feature of Cisco IOS XE Software could allow a low-privileged, authenticated, remote attacker to cause a denial of service condition (DoS) on an affected device. This vulnerability is due to insufficient resource management. An attacker could exploit this vulnerability by initiating a large number of NETCONF over SSH connections. A successful exploit could allow the attacker to exhaust resources, causing the device to reload and resulting in a DoS condition on an affected device.

A vulnerability in the web services interface of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to improper resource management in the HTTP server code. An attacker could exploit this vulnerability by sending a large number of HTTP requests to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

Cisco IOS XE 3.15S and 3.16S on cBR-8 Converged Broadband Router devices allows remote authenticated users to cause a denial of service (NULL pointer dereference and card restart) via a crafted SNMP request, aka Bug ID CSCuu68862.

Cisco TelePresence Video Communication Server (VCS) X8.5.1 and X8.5.2 allows remote authenticated users to cause a denial of service (VoIP outage) via a crafted SIP message, aka Bug ID CSCuu43026.

Double free vulnerability in Cisco IOS XE 3.15S, 3.16S, and 3.17S allows remote authenticated users to cause a denial of service (device restart) via a sequence of crafted SNMP read requests, aka Bug ID CSCux13174.

A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, remote attacker to cause the SNMP application on an affected device to restart unexpectedly. The vulnerability is due to improper validation of Abstract Syntax Notation One (ASN.1)-encoded variables in SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the SNMP daemon on the affected device. A successful exploit could allow the attacker to cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition.

A vulnerability in Locally Significant Certificate (LSC) management for the Cisco Wireless LAN Controller (WLC) could allow an authenticated, remote attacker to cause the device to unexpectedly restart, which causes a denial of service (DoS) condition. The attacker would need to have valid administrator credentials. The vulnerability is due to incorrect input validation of the HTTP URL used to establish a connection to the LSC Certificate Authority (CA). An attacker could exploit this vulnerability by authenticating to the targeted device and configuring a LSC certificate. An exploit could allow the attacker to cause a DoS condition due to an unexpected restart of the device.

A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco Small Business Sx200, Sx300, Sx500, ESW2 Series Managed Switches and Small Business Sx250, Sx350, Sx550 Series Switches could allow an authenticated, remote attacker to cause the SNMP application of an affected device to cease processing traffic, resulting in the CPU utilization reaching one hundred percent. Manual intervention may be required before a device resumes normal operations. The vulnerability is due to improper validation of SNMP protocol data units (PDUs) in SNMP packets. An attacker could exploit this vulnerability by sending a malicious SNMP packet to an affected device. A successful exploit could allow the attacker to cause the device to cease forwarding traffic, which could result in a denial of service (DoS) condition. Cisco has released firmware updates that address this vulnerability.

A vulnerability in the XML API of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker to cause the CPU to increase to 100% utilization, causing a denial of service (DoS) condition on an affected system. The vulnerability is due to improper handling of the XML input. An attacker could exploit this vulnerability by sending a specifically crafted XML payload. A successful exploit could allow the attacker to exhaust CPU resources, resulting in a DoS condition until the system is manually rebooted. Software versions prior to X12.5.1 are affected.

A vulnerability in the WebVPN service of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper management of authenticated sessions in the WebVPN portal. An attacker could exploit this vulnerability by authenticating with valid credentials and accessing a specific URL in the WebVPN portal. A successful exploit could allow the attacker to cause the device to reload, resulting in a temporary DoS condition.

A vulnerability in the phone book feature of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker to cause the CPU to increase to 100% utilization, causing a denial of service (DoS) condition on an affected system. The vulnerability is due to improper handling of the XML input. An attacker could exploit this vulnerability by sending a Session Initiation Protocol (SIP) message with a crafted XML payload to an affected device. A successful exploit could allow the attacker to exhaust CPU resources, resulting in a DoS condition. Manual intervention may be required to recover the device. This vulnerability is fixed in Cisco Expressway Series and Cisco TelePresence Video Communication Server Releases X12.5.1 and later.

A vulnerability in the web-based management interface of Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, remote attacker to cause a denial of service condition on an affected device. The vulnerability is due to improper validation of user-supplied requests to the web-based management interface. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface of an affected device. A successful exploit could allow the attacker to cause the device to stop responding, requiring manual intervention for recovery.

A vulnerability in the web application of Cisco TelePresence Advanced Media Gateway could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to the lack of input validation in the web application. An attacker could exploit this vulnerability by sending a crafted authenticated HTTP request to the device. An exploit could allow the attacker to stop services on an affected device. The device may become inoperable and results in a denial of service (DoS) condition.

A vulnerability in the web proxy functionality of Cisco AsyncOS Software for Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient input validation mechanisms for certain fields in HTTP/HTTPS requests sent through an affected device. A successful attacker could exploit this vulnerability by sending a malicious HTTP/HTTPS request through an affected device. An exploit could allow the attacker to force the device to stop processing traffic, resulting in a DoS condition.

Cisco NX-OS on Nexus 9000 devices 11.1(1c) allows remote authenticated users to cause a denial of service (device hang) via large files that are copied to a device's filesystem, aka Bug ID CSCuu77225.

A vulnerability in the administrative GUI configuration feature of Cisco Wireless LAN Controller (WLC) Software could allow an aUTHENTICated, remote attacker to cause the device to reload unexpectedly during device configuration when the administrator is using this GUI, causing a denial of service (DoS) condition on an affected device. The attacker would need to have valid administrator credentials on the device. This vulnerability is due to incomplete input validation for unexpected configuration options that the attacker could submit while accessing the GUI configuration menus. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted user input when using the administrative GUI configuration feature. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Software versions prior to 8.3.150.0, 8.5.140.0, 8.8.111.0 are affected by this vulnerability.

A vulnerability in the TrustSec CLI parser of Cisco IOS and Cisco IOS XE Software could allow an authenticated, remote attacker to cause an affected device to reload. This vulnerability is due to an improper interaction between the web UI and the CLI parser. An attacker could exploit this vulnerability by requesting a particular CLI command to be run through the web UI. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in Simple Network Management Protocol (SNMP) functions of Cisco ASR 1000 Series Aggregation Services Routers running Cisco IOS XE Software Release 3.13.6S, 3.16.2S, or 3.17.1S could allow an authenticated, remote attacker to cause high CPU usage on an affected device, resulting in a denial of service (DoS) condition. More Information: CSCux68796. Known Affected Releases: 15.5(3)S2.1 15.6(1)S1.1. Known Fixed Releases: 15.4(3)S6.1 15.4(3)S6.2 15.5(3)S2.2 15.5(3)S3 15.6(0.22)S0.23 15.6(1)S2 16.2(0.295) 16.3(0.94) 15.5.3S3.

A vulnerability in the Link Layer Discovery Protocol (LLDP) message parser of Cisco IOS Software and Cisco IOS XE Software could allow an attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to improper initialization of a buffer. An attacker could exploit this vulnerability via any of the following methods: An authenticated, remote attacker could access the LLDP neighbor table via either the CLI or SNMP while the device is in a specific state. An unauthenticated, adjacent attacker could corrupt the LLDP neighbor table by injecting specific LLDP frames into the network and then waiting for an administrator of the device or a network management system (NMS) managing the device to retrieve the LLDP neighbor table of the device via either the CLI or SNMP. An authenticated, adjacent attacker with SNMP read-only credentials or low privileges on the device CLI could corrupt the LLDP neighbor table by injecting specific LLDP frames into the network and then accessing the LLDP neighbor table via either the CLI or SNMP. A successful exploit could allow the attacker to cause the affected device to crash, resulting in a reload of the device.

The IPv4 implementation on Cisco ASR 1000 devices with software 15.5(3)S allows remote attackers to cause a denial of service (ESP QFP CPU consumption) by triggering packet fragmentation and reassembly, aka Bug ID CSCuv71273.

Cisco TelePresence Server 3.1 on 7010, Mobility Services Engine (MSE) 8710, Multiparty Media 310 and 320, and Virtual Machine (VM) devices allows remote attackers to cause a denial of service (device reload) via malformed STUN packets, aka Bug ID CSCuv01348.

Cisco Web Security Appliance (WSA) 8.0.7 allows remote HTTP servers to cause a denial of service (memory consumption from stale TCP connections) via crafted responses, aka Bug ID CSCuw10426.

The encryption-processing feature in Cisco libSRTP before 1.5.3 allows remote attackers to cause a denial of service via crafted fields in SRTP packets, aka Bug ID CSCux00686.

The Proxy Mobile IPv6 (PMIPv6) component in the CDMA implementation on Cisco ASR 5000 devices with software 19.0.M0.60737 allows remote attackers to cause a denial of service (hamgr process restart) via a crafted header in a PMIPv6 packet, aka Bug ID CSCuv63280.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

A vulnerability in the Cisco Webex Network Recording Player for Microsoft Windows and the Cisco Webex Player for Microsoft Windows could allow an attacker to execute arbitrary code on an affected system. The vulnerability exist because the affected software improperly validates Advanced Recording Format (ARF) and Webex Recording Format (WRF) files. An attacker could exploit this vulnerability by sending a user a malicious ARF or WRF file via a link or email attachment and persuading the user to open the file with the affected software. Successful exploitation could allow the attacker to execute arbitrary code on the affected system.

A vulnerability in the received packet parser of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) software could allow an unauthenticated, remote attacker to cause a reload of the affected system, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient size validation of user-supplied data. An attacker could exploit this vulnerability by sending crafted H.224 data in Real-Time Transport Protocol (RTP) packets in an H.323 call. An exploit could allow the attacker to overflow a buffer in a cache that belongs to the received packet parser, which will result in a crash of the application, resulting in a DoS condition. All versions of Cisco Expressway Series Software and Cisco TelePresence VCS Software prior to version X8.8.2 are vulnerable. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. Cisco Bug IDs: CSCus99263.

Stack-based buffer overflow in the SetSource method in the NetCamPlayerWeb11gv2 ActiveX control in NetCamPlayerWeb11gv2.ocx on the Cisco Linksys WVC54GC wireless video camera before firmware 1.25 allows remote attackers to execute arbitrary code via long invalid arguments.

Stack-based buffer overflow in the WebexUCFObject ActiveX control in atucfobj.dll in Cisco WebEx Meeting Manager before 20.2008.2606.4919 allows remote attackers to execute arbitrary code via a long argument to the NewObject method.

A vulnerability in the web UI of the Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to execute arbitrary commands within the affected device.

A vulnerability in the web UI of the Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to execute arbitrary commands within the affected device.

Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.