The device does not properly authenticate users and the potential exists for a remote user to upload a new firmware image to the Ethernet card, whether it is a corrupt or legitimate firmware image. Successful exploitation of this vulnerability could cause loss of availability, integrity, and confidentiality and a disruption in communications with other connected devices. Rockwell Automation EtherNet/IP products; 1756-ENBT, 1756-EWEB, 1768-ENBT, and 1768-EWEB communication modules; CompactLogix L32E and L35E controllers; 1788-ENBT FLEXLogix adapter; 1794-AENTR FLEX I/O EtherNet/IP adapter; ControlLogix 18 and earlier; CompactLogix 18 and earlier; GuardLogix 18 and earlier; SoftLogix 18 and earlier; CompactLogix controllers 19 and earlier; SoftLogix controllers 19 and earlier; ControlLogix controllers 20 and earlier; GuardLogix controllers 20 and earlier; and MicroLogix 1100 and 1400

ASUS DSL-AC51, DSL-AC52U, DSL-AC55U, DSL-N55U C1, DSL-N55U D1, DSL-AC56U, DSL-N10_C1, DSL-N12U C1, DSL-N12E C1, DSL-N14U, DSL-N14U-B1, DSL-N16, DSL-N16U, DSL-N17U, DSL-N66U, and DSL-AC750 routers allow remote attackers to change passwords of arbitrary users via the http_passwd parameter to mod_login.asp.

cgi-bin/setup_dns.exe on the Belkin F5D7230-4 router with firmware 9.01.10 does not require authentication, which allows remote attackers to perform administrative actions, as demonstrated by changing a DNS server via the dns1_1, dns1_2, dns1_3, and dns1_4 parameters. NOTE: it was later reported that F5D7632-4V6 with firmware 6.01.08 is also affected.

The Disaster Recovery Framework (DRF) master server in Cisco Unified Communications products, including Unified Communications Manager (CUCM) 5.x and 6.x, Unified Presence 1.x and 6.x, Emergency Responder 2.x, and Mobility Manager 2.x, does not require authentication for requests received from the network, which allows remote attackers to execute arbitrary code via unspecified vectors.

SNMPv3 HMAC verification in (1) Net-SNMP 5.2.x before 5.2.4.1, 5.3.x before 5.3.2.1, and 5.4.x before 5.4.1.1; (2) UCD-SNMP; (3) eCos; (4) Juniper Session and Resource Control (SRC) C-series 1.0.0 through 2.0.0; (5) NetApp (aka Network Appliance) Data ONTAP 7.3RC1 and 7.3RC2; (6) SNMP Research before 16.2; (7) multiple Cisco IOS, CatOS, ACE, and Nexus products; (8) Ingate Firewall 3.1.0 and later and SIParator 3.1.0 and later; (9) HP OpenView SNMP Emanate Master Agent 15.x; and possibly other products relies on the client to specify the HMAC length, which makes it easier for remote attackers to bypass SNMP authentication via a length value of 1, which only checks the first byte.

EMC RSA Authentication Agent for Web: Apache Web Server version 8.0 and RSA Authentication Agent for Web: Apache Web Server version 8.0.1 prior to Build 618 have a security vulnerability that could potentially lead to authentication bypass.

Xpress Server in SAP POS does not require authentication for file read and erase operations, daemon shutdown, terminal read operations, or certain attacks on credentials. This is SAP Security Note 2520064.

The function in charge to check whether the user is already logged in init.php in Interspire Email Marketer (IEM) prior to 6.1.6 allows remote attackers to bypass authentication and obtain administrative access by using the IEM_CookieLogin cookie with a specially crafted value.

Hanwha Techwin SRN-4000, SRN-4000 firmware versions prior to SRN4000_v2.16_170401, A specially crafted http request and response could allow an attacker to gain access to the device management page with admin privileges without proper authentication.

In ABB IP GATEWAY 3.39 and prior, by accessing a specific uniform resource locator (URL) on the web server, a malicious user is able to access the configuration files and application pages without authentication.

In Android before 2018-01-05 on Qualcomm Snapdragon IoT, Snapdragon Mobile, Snapdragon Automobile APQ8096AU, MDM9206, MDM9650, MSM8996AU, SD 210/SD 212/SD 205, SD 425, SD 430, SD 625, SD 650/52, SD 820, SD 835, it is possible for the XBL loader to skip the authentication of device config.

Baxter SIGMA Spectrum Infusion System version 6.05 (model 35700BAX) with wireless battery module (WBM) version 16 is remotely accessible via Port 22/SSH without authentication. A remote attacker may be able to make unauthorized configuration changes to the WBM, as well as issue commands to access account credentials and shared keys. Baxter asserts that this vulnerability only allows access to features and functionality on the WBM and that the SIGMA Spectrum infusion pump cannot be controlled from the WBM. Baxter has released a new version of the SIGMA Spectrum Infusion System, Version 8, which incorporates hardware and software changes.

Sonatype Nexus Repository Manager before 3.17.0 establishes a default administrator user with weak defaults (fixed credentials).

An Improper Authentication issue was discovered in Newport XPS-Cx and XPS-Qx. An attacker may bypass authentication by accessing a specific uniform resource locator (URL).

Televes COAXDATA GATEWAY 1Gbps devices doc-wifi-hgw_v1.02.0014 4.20 do not check password.shtml authorization, leading to Arbitrary password change.

ext_find_user in eXtplorer through 2.1.2 allows remote attackers to bypass authentication via a password[]= (aka an empty array) in an action=login request to index.php.

The web management UI in Palo Alto Networks PAN-OS before 3.1.12, 4.0.x before 4.0.10, and 4.1.x before 4.1.4 allows remote attackers to bypass authentication and obtain administrator privileges via unspecified vectors, aka Ref ID 37034.

In macOS High Sierra before 10.13.3, Security Update 2018-001 Sierra, and Security Update 2018-001 El Capitan, a logic error existed in the validation of credentials. This was addressed with improved credential validation.

GE Centricity PACS RA1000, diagnostic image analysis, all current versions are affected these devices use default or hard-coded credentials. Successful exploitation of this vulnerability may allow a remote attacker to bypass authentication and gain access to the affected devices.

A vulnerability in the authentication module of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to bypass local authentication. The vulnerability is due to improper handling of authentication requests and policy assignment for externally authenticated users. An attacker could exploit this vulnerability by authenticating with a valid external user account that matches an internal username and incorrectly receiving the authorization policy of the internal account. An exploit could allow the attacker to have Super Admin privileges for the ISE Admin portal. This vulnerability does not affect endpoints authenticating to the ISE. The vulnerability affects Cisco ISE, Cisco ISE Express, and Cisco ISE Virtual Appliance running Release 1.3, 1.4, 2.0.0, 2.0.1, or 2.1.0. Release 2.2.x is not affected. Cisco Bug IDs: CSCvb10995.

Authentication bypass vulnerability in Trend Micro Mobile Security (Enterprise) versions before 9.7 Patch 3 allows attackers to access a specific part of the console using a blank password.

An authentication bypass vulnerability on UTStar WA3002G4 ADSL Broadband Modem WA3002G4-0021.01 devices allows attackers to directly access administrative settings and obtain cleartext credentials from HTML source, as demonstrated by info.cgi, upload.cgi, backupsettings.cgi, pppoe.cgi, resetrouter.cgi, and password.cgi.

Unspecified vulnerability in the Header Image Module before 5.x-1.1 for Drupal allows remote attackers to access the administration pages via unknown attack vectors.

The administration panel on the Airspan WiMax ProST 4.1 antenna with 6.5.38.0 software does not verify authentication credentials, which allows remote attackers to (1) upload malformed firmware or (2) bind the antenna to a different WiMAX base station via unspecified requests to forms under process_adv/.

An authentication vulnerability in HPE BSM Platform Application Performance Management System Health product versions 9.26, 9.30 and 9.40, allows remote users to bypass authentication.

GE GEMNet License server (EchoServer) all current versions are affected these devices use default or hard-coded credentials. Successful exploitation of this vulnerability may allow a remote attacker to bypass authentication and gain access to the affected devices.

PostgreSQL versions before 9.2.22, 9.3.18, 9.4.13, 9.5.8 and 9.6.4 are vulnerable to incorrect authentication flaw allowing remote attackers to gain access to database accounts with an empty password.

The FTP server on the Linksys WRT54G 7 router with 7.00.1 firmware does not verify authentication credentials, which allows remote attackers to establish an FTP session by sending an arbitrary username and password.

An Authentication Bypass by Spoofing issue was discovered in LAVA Ether-Serial Link (ESL) running firmware versions 6.01.00/29.03.2007 and prior versions. An improper authentication vulnerability has been identified, which, if exploited, would allow an attacker with the same IP address to bypass authentication by accessing a specific uniform resource locator.

A vulnerability in the upgrade mechanism of Cisco collaboration products based on the Cisco Voice Operating System software platform could allow an unauthenticated, remote attacker to gain unauthorized, elevated access to an affected device. The vulnerability occurs when a refresh upgrade (RU) or Prime Collaboration Deployment (PCD) migration is performed on an affected device. When a refresh upgrade or PCD migration is completed successfully, an engineering flag remains enabled and could allow root access to the device with a known password. If the vulnerable device is subsequently upgraded using the standard upgrade method to an Engineering Special Release, service update, or a new major release of the affected product, this vulnerability is remediated by that action. Note: Engineering Special Releases that are installed as COP files, as opposed to the standard upgrade method, do not remediate this vulnerability. An attacker who can access an affected device over SFTP while it is in a vulnerable state could gain root access to the device. This access could allow the attacker to compromise the affected system completely. Cisco Bug IDs: CSCvg22923, CSCvg55112, CSCvg55128, CSCvg55145, CSCvg58619, CSCvg64453, CSCvg64456, CSCvg64464, CSCvg64475, CSCvg68797.

Remote manipulations with language pack updater lead to NTLM-relay attack for system user in Gemalto's HASP SRM, Sentinel HASP and Sentinel LDK products prior to Sentinel LDK RTE version 7.55.

An issue was discovered in Zammad before 1.0.4, 1.1.x before 1.1.3, and 1.2.x before 1.2.1. Attackers can login with the hashed password itself (e.g., from the DB) instead of the valid password string.

A vulnerability in the implementation of the Locator/ID Separation Protocol (LISP) in Cisco IOS XE 3.2 through 16.5 could allow an unauthenticated, remote attacker using an x tunnel router to bypass authentication checks performed when registering an Endpoint Identifier (EID) to a Routing Locator (RLOC) in the map server/map resolver (MS/MR). The vulnerability is due to a logic error introduced via a code regression for the affected software. An attacker could exploit this vulnerability by sending specific valid map-registration requests, which will be accepted by the MS/MR even if the authentication keys do not match, to the affected software. A successful exploit could allow the attacker to inject invalid mappings of EIDs to RLOCs in the MS/MR of the affected software. This vulnerability affects Cisco devices that are configured with LISP acting as an IPv4 or IPv6 map server. This vulnerability affects Cisco IOS XE Software release trains 3.9E and Everest 16.4. Cisco Bug IDs: CSCvc18008.

A remote attacker could bypass the Sandstorm organization restriction before build 0.203 via a comma in an email-address field.

It was discovered that the api/storage web interface in Unitrends Backup (UB) before 10.0.0 has an issue in which one of its input parameters was not validated. A remote attacker could use this flaw to bypass authentication and execute arbitrary commands with root privilege on the target system.

NetComm Wireless 4GT101W routers with Hardware: 0.01 / Software: V1.1.8.8 / Bootloader: 1.1.3 do not require authentication for logfile.html, status.html, or system_config.html.

Detcon Sitewatch Gateway, all versions without cellular, Passwords are presented in plaintext in a file that is accessible without authentication.

A vulnerability in the REST API of the web-based user interface (web UI) of Cisco IOS XE 3.1 through 16.5 could allow an unauthenticated, remote attacker to bypass authentication to the REST API of the web UI of the affected software. The vulnerability is due to insufficient input validation for the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious API request to an affected device. A successful exploit could allow the attacker to bypass authentication and gain access to the web UI of the affected software. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration UI was introduced in the Denali 16.2 Release of Cisco IOS XE Software. This vulnerability does not affect the web-based administration UI in earlier releases of Cisco IOS XE Software. Cisco Bug IDs: CSCuz46036.

It was discovered that the bpserverd proprietary protocol in Unitrends Backup (UB) before 10.0.0, as invoked through xinetd, has an issue in which its authentication can be bypassed. A remote attacker could use this issue to execute arbitrary commands with root privilege on the target system.

McAfee SmartFilter Administration, and SmartFilter Administration Bess Edition, before 4.2.1.01 does not require authentication for access to the JBoss Remote Method Invocation (RMI) interface, which allows remote attackers to execute arbitrary code via a crafted .war file.

It was noticed that a malicious process impersonating an Impala daemon in Apache Impala (incubating) 2.7.0 to 2.8.0 could cause Impala daemons to skip authentication checks when Kerberos is enabled (but TLS is not). If the malicious server responds with 'COMPLETE' before the SASL handshake has completed, the client will consider the handshake as completed even though no exchange of credentials has happened.

An Improper Authentication issue was discovered in Advantech WebAccess versions prior to V8.2_20170817. Specially crafted requests allow a possible authentication bypass that could allow remote code execution.

An authentication bypass vulnerability in Juniper Networks Junos Space Network Management Platform may allow a remote unauthenticated network based attacker to login as any privileged user. This issue only affects Junos Space Network Management Platform 17.1R1 without Patch v1 and 16.1 releases prior to 16.1R3. This issue was found by an external security researcher.

A vulnerability in the web-based GUI of Cisco Prime Home could allow an unauthenticated, remote attacker to bypass authentication and execute actions with administrator privileges. The vulnerability is due to a processing error in the role-based access control (RBAC) of URLs. An attacker could exploit this vulnerability by sending API commands via HTTP to a particular URL without prior authentication. An exploit could allow the attacker to perform any actions in Cisco Prime Home with administrator privileges. This vulnerability affects Cisco Prime Home versions from 6.3.0.0 to the first fixed release 6.5.0.1. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. Cisco Bug IDs: CSCvb49837.

OneLogin PythonSAML 2.3.0 and earlier may incorrectly utilize the results of XML DOM traversal and canonicalization APIs in such a way that an attacker may be able to manipulate the SAML data without invalidating the cryptographic signature, allowing the attack to potentially bypass authentication to SAML service providers.

A vulnerability in synotheme_upload.php in Synology Photo Station before 6.7.3-3432 and 6.3-2967 allows remote attackers to upload arbitrary files without authentication via the logo_upload action.

In EMC Avamar Server Software 7.3.1-125, 7.3.0-233, 7.3.0-226, 7.2.1-32, 7.2.1-31, 7.2.0-401, an unauthenticated remote attacker may potentially bypass the authentication process to gain access to the system maintenance page. This may be exploited by an attacker to view sensitive information, perform software updates, or run maintenance workflows.

The web interface on the SMC SMC8024L2 switch allows remote attackers to bypass authentication and obtain administrative access via a direct request to a .html file under (1) status/, (2) system/, (3) ports/, (4) trunks/, (5) vlans/, (6) qos/, (7) rstp/, (8) dot1x/, (9) security/, (10) igmps/, or (11) snmp/.

The web interface on (1) Foscam and (2) Wansview IP cameras allows remote attackers to bypass authentication, and perform administrative functions or read the admin password, via a direct request to an unspecified URL.

Condor before 7.8.2 allows remote attackers to bypass host-based authentication and execute actions such as ALLOW_ADMINISTRATOR or ALLOW_WRITE by connecting from a system with a spoofed reverse DNS hostname.