An issue was discovered on Humax Wireless Voice Gateway HGB10R-2 20160817_1855 devices. Admin credentials are sent over cleartext HTTP.

GitLab EE 8.4 through 12.5, 12.4.3, and 12.3.6 stored several tokens in plaintext.

Fronius Solar Inverter devices before 3.14.1 (HM 1.12.1) allow attackers to bypass authentication because the password for the today account is stored in the /tmp/web_users.conf file.

The Voo branded NETGEAR CG3700b custom firmware V2.02.03 uses HTTP Basic Authentication over cleartext HTTP.

The Customer's Tomedo Server in Version 1.7.3 communicates to the Vendor Tomedo Server via HTTP (in cleartext) that can be sniffed by unauthorized actors. Basic authentication is used for the authentication, making it possible to base64 decode the sniffed credentials and discover the username and password.

In Bitcoin Core 0.18.0, bitcoin-qt stores wallet.dat data unencrypted in memory. Upon a crash, it may dump a core file. If a user were to mishandle a core file, an attacker can reconstruct the user's wallet.dat file, including their private keys, via a grep "6231 0500" command.

NETSAS Enigma NMS 65.0.0 and prior utilises basic authentication over HTTP for enforcing access control to the web application. The use of weak authentication transmitted over cleartext protocols can allow an attacker to steal username and password combinations by intercepting authentication traffic in transit.

All versions up to V4.01.01.02 of ZTE ZXCLOUD GoldenData VAP product have encryption problems vulnerability. Attackers could sniff unencrypted account and password through the network for front-end system access.

An issue was discovered on Mitsubishi Electric Europe B.V. ME-RTU devices through 2.02 and INEA ME-RTU devices through 3.0. Stored cleartext passwords could allow an unauthenticated attacker to obtain configured username and password combinations on the RTU due to the weak credentials management on the RTU. An unauthenticated user can obtain the exposed password credentials to gain access to the following services: DDNS service, Mobile Network Provider, and OpenVPN service.

The HTTP client in Gradle before 5.6 sends authentication credentials originally destined for the configured host. If that host returns a 30x redirect, Gradle also sends those credentials to all subsequent hosts that the request redirects to. This is similar to CVE-2018-1000007.

A cleartext password storage issue was discovered on MicroDigital N-series cameras with firmware through 6400.0.8.5. The file in question is /usr/local/ipsca/mipsca.db. If a camera is compromised, the attacker can gain access to passwords and abuse them to compromise further systems.

TronLink Wallet 2.2.0 stores user wallet keystore in plaintext and places them in insecure storage. An attacker can read and reuse the user keystore of a valid user via /data/data/com.tronlink.wallet/shared_prefs/<wallet-name>.xml to gain unauthorized access.

Dynacolor FCM-MB40 v1.2.0.0 use /etc/appWeb/appweb.pass to store administrative web-interface credentials in cleartext. These credentials can be retrieved via cgi-bin/getuserinfo.cgi?mode=info.

Calamares versions 3.1 through 3.2.10 copies a LUKS encryption keyfile from /crypto_keyfile.bin (mode 0600 owned by root) to /boot within a globally readable initramfs image with insecure permissions, which allows this originally protected file to be read by any user, thereby disclosing decryption keys for LUKS containers created with Full Disk Encryption.

AMI MegaRAC SPX devices allow Password Disclosure through Redfish. The fixed versions are SPx_12-update-7.00 and SPx_13-update-5.00.

Zyxel CloudCNM SecuManager 3.1.0 and 3.1.1 has an unauthenticated update_all_realm_license API.

Apache CXF ships with a OpenId Connect JWK Keys service, which allows a client to obtain the public keys in JWK format, which can then be used to verify the signature of tokens issued by the service. Typically, the service obtains the public key from a local keystore (JKS/PKCS12) by specifing the path of the keystore and the alias of the keystore entry. This case is not vulnerable. However it is also possible to obtain the keys from a JWK keystore file, by setting the configuration parameter "rs.security.keystore.type" to "jwk". For this case all keys are returned in this file "as is", including all private key and secret key credentials. This is an obvious security risk if the user has configured the signature keystore file with private or secret key credentials. From CXF 3.3.5 and 3.2.12, it is mandatory to specify an alias corresponding to the id of the key in the JWK file, and only this key is returned. In addition, any private key information is omitted by default. "oct" keys, which contain secret keys, are not returned at all.

Pivotal Reactor Netty, versions prior to 0.8.11, passes headers through redirects, including authorization ones. A remote unauthenticated malicious user may gain access to credentials for a different server than they have access to.

Western Digital SanDisk X600 devices in certain configurations, a vulnerability in the access control mechanism of the drive may allow data to be decrypted without knowledge of proper authentication credentials.

CloudBees Jenkins Operations Center 2.150.2.3, when an expired trial license exists, allows Cleartext Password Storage and Retrieval via the proxy configuration page.

An issue was discovered in bridgetech VB288 Objective QoE Content Extractor, firmware version 5.6.0-8, allowing attackers to gain sensitive information such as administrator passwords via the /probe/core/setup/passwd endpoint.

A vulnerability has been identified in LOGO! 8 BM (incl. SIPLUS variants) (All versions < V8.3). Unencrypted storage of passwords in the project could allow an attacker with access to port 10005/tcp to obtain passwords of the device. The security vulnerability could be exploited by an unauthenticated attacker with network access to port 10005/tcp. No user interaction is required to exploit this security vulnerability. The vulnerability impacts confidentiality of the device. At the time of advisory publication no public exploitation of this security vulnerability was known

In Gradle Enterprise before 2018.5.3, Build Cache Nodes did not store the credentials at rest in an encrypted format.

Fleet before 2.1.2 allows exposure of SMTP credentials.

A security regression of CVE-2019-9636 was discovered in python since commit d537ab0ff9767ef024f26246899728f0116b1ec3 affecting versions 2.7, 3.5, 3.6, 3.7 and from v3.8.0a4 through v3.8.0b1, which still allows an attacker to exploit CVE-2019-9636 by abusing the user and password parts of a URL. When an application parses user-supplied URLs to store cookies, authentication credentials, or other kind of information, it is possible for an attacker to provide specially crafted URLs to make the application locate host-related information (e.g. cookies, authentication data) and send them to a different host than where it should, unlike if the URLs had been correctly parsed. The result of an attack may vary based on the application.

TeamPass version 2.1.27 and earlier contains a Storing Passwords in a Recoverable Format vulnerability in Shared password vaults that can result in all shared passwords are recoverable server side. This attack appears to be exploitable via any vulnerability that can bypass authentication or role assignment and can lead to shared password leakage.

Prior to Spark 2.3.3, in certain situations Spark would write user data to local disk unencrypted, even if spark.io.encryption.enabled=true. This includes cached blocks that are fetched to disk (controlled by spark.maxRemoteBlockSizeFetchToMem); in SparkR, using parallelize; in Pyspark, using broadcast and parallelize; and use of python udfs.

Aquaverde GmbH Aquarius CMS prior to version 4.1.1 is affected by: Incorrect Access Control. The impact is: The access to the log file is not restricted. It contains sensitive information like passwords etc. The component is: log file. The attack vector is: open the file.

The BestWebSoft's Like & Share WordPress plugin before 2.74 discloses the content of password protected posts to unauthenticated users via a meta tag

The .NET SDK WebForm Viewer in SAP Crystal Reports for Visual Studio (fixed in version 2010) discloses sensitive database information including credentials which can be misused by the attacker.

SickRage before v2018.03.09-1 includes cleartext credentials in HTTP responses.

The Download Manager WordPress plugin before 3.2.83 does not protect file download's passwords, leaking it upon receiving an invalid one.

A Vulnerability in OTRS AgentInterface and ExternalInterface allows the reading of plain text passwords which are send back to the client in the server response- This issue affects OTRS: from 8.0.X through 8.0.37.

When configuring Octopus Server if it is configured with an external SQL database, on initial configuration the database password is written to the OctopusServer.txt log file in plaintext.

In Hardware Sentry KM before 10.0.01 for BMC PATROL, a cleartext password may be discovered after a failure or timeout of a command.

rap2hpoutre Laravel Log Viewer before v0.13.0 relies on Base64 encoding for l, dl, and del requests, which makes it easier for remote attackers to bypass intended access restrictions, as demonstrated by reading arbitrary files via a dl request.

User credentials stored in a recoverable format within Fidelis Network and Deception CommandPost. In the event that an attacker gains access to the CommandPost, these values could be decoded and used to login to the application. The vulnerability is present in Fidelis Network and Deception versions prior to 9.3.3. This vulnerability has been addressed in version 9.3.3 and subsequent versions.

A Credentials Management CWE-255 vulnerability exists in the APC UPS Network Management Card 2 AOS v6.5.6, which could cause Remote Monitoring Credentials to be viewed in plaintext when Remote Monitoring is enabled, and then disabled.

FaceSentry Access Control System 6.4.8 contains a cleartext password storage vulnerability that allows attackers to access unencrypted credentials in the device's SQLite database. Attackers can directly read sensitive login information stored in /faceGuard/database/FaceSentryWeb.sqlite without additional authentication.

In TotalAlert Web Application in BeaconMedaes Scroll Medical Air Systems prior to v4107600010.23, an attacker with network access to the integrated web server could retrieve default or user defined credentials stored and transmitted in an insecure manner.

A flaw was found in keycloak where a brute force attack is possible even when the permanent lockout feature is enabled. This is due to a wrong error message displayed when wrong credentials are entered. The highest threat from this vulnerability is to confidentiality.

An issue was discovered on FiberHome HG6245D devices through RP2613. wifictl_2g.cfg has cleartext passwords and 0644 permissions.

An issue was discovered on FiberHome HG6245D devices through RP2613. wifictl_5g.cfg has cleartext passwords and 0644 permissions.

Insufficiently Protected Credentials vulnerability in Apache Solr. This issue affects Apache Solr: from 6.0.0 through 8.11.2, from 9.0.0 before 9.3.0. One of the two endpoints that publishes the Solr process' Java system properties, /admin/info/properties, was only setup to hide system properties that had "password" contained in the name. There are a number of sensitive system properties, such as "basicauth" and "aws.secretKey" do not contain "password", thus their values were published via the "/admin/info/properties" endpoint. This endpoint populates the list of System Properties on the home screen of the Solr Admin page, making the exposed credentials visible in the UI. This /admin/info/properties endpoint is protected under the "config-read" permission. Therefore, Solr Clouds with Authorization enabled will only be vulnerable through logged-in users that have the "config-read" permission. Users are recommended to upgrade to version 9.3.0 or 8.11.3, which fixes the issue. A single option now controls hiding Java system property for all endpoints, "-Dsolr.hiddenSysProps". By default all known sensitive properties are hidden (including "-Dbasicauth"), as well as any property with a name containing "secret" or "password". Users who cannot upgrade can also use the following Java system property to fix the issue:   '-Dsolr.redaction.system.pattern=.*(password|secret|basicauth).*'

In the web application in BeaconMedaes TotalAlert Scroll Medical Air Systems running software versions prior to 4107600010.23, passwords are presented in plaintext in a file that is accessible without authentication.

IBM CICS Transaction Gateway for Multiplatforms 9.2 and 9.3 transmits or stores authentication credentials, but it uses an insecure method that is susceptible to unauthorized interception and/or retrieval.

CWE-522 Insufficiently Protected Credentials vulnerability that could cause unauthorized access and exposure of sensitive information when unauthenticated attacker accesses credentials stored within firmware or system files. With this credential an attacker could subsequently compromise the device if they have physical access to the device.

An issue was discovered in svc-login.php in Void Aural Rec Monitor 9.0.0.1. Passwords are stored in unencrypted source-code text files. This was noted when accessing the svc-login.php file. The value is used to authenticate a high-privileged user upon authenticating with the server.

In IXP EasyInstall 6.2.13723, there are cleartext credentials in network communication on TCP port 20050 when using the Administrator console remotely.