A memory allocation issue in vernemq v2.0.1 allows attackers to cause a Denial of Service (DoS) via excessive memory consumption.

ida64.dll in Hex-Rays IDA Pro through 8.4 crashes when there is a section that has many jumps linked, and the final jump corresponds to the payload from where the actual entry point will be invoked. NOTE: in many use cases, this is an inconvenience but not a security issue.

snappy-java is a fast compressor/decompressor for Java. Due to use of an unchecked chunk length, an unrecoverable fatal error can occur in versions prior to 1.1.10.1. The code in the function hasNextChunk in the fileSnappyInputStream.java checks if a given stream has more chunks to read. It does that by attempting to read 4 bytes. If it wasn’t possible to read the 4 bytes, the function returns false. Otherwise, if 4 bytes were available, the code treats them as the length of the next chunk. In the case that the `compressed` variable is null, a byte array is allocated with the size given by the input data. Since the code doesn’t test the legality of the `chunkSize` variable, it is possible to pass a negative number (such as 0xFFFFFFFF which is -1), which will cause the code to raise a `java.lang.NegativeArraySizeException` exception. A worse case would happen when passing a huge positive value (such as 0x7FFFFFFF), which would raise the fatal `java.lang.OutOfMemoryError` error. Version 1.1.10.1 contains a patch for this issue.

A Denial of Service (DoS) issue has been discovered in GitLab CE/EE affecting all up to 17.8.7, 17.9 prior to 17.9.6 and 17.10 prior to 17.10.4 A denial of service could occur upon injecting oversized payloads into CI pipeline exports.

Specific IPv6 DHCP packets received by the jdhcpd daemon will cause a memory resource consumption issue to occur on a Junos OS device using the jdhcpd daemon configured to respond to IPv6 requests. Once started, memory consumption will eventually impact any IPv4 or IPv6 request serviced by the jdhcpd daemon, thus creating a Denial of Service (DoS) condition to clients requesting and not receiving IP addresses. Additionally, some clients which were previously holding IPv6 addresses will not have their IPv6 Identity Association (IA) address and network tables agreed upon by the jdhcpd daemon after the failover event occurs, which leads to more than one interface, and multiple IP addresses, being denied on the client. Affected releases are Juniper Networks Junos OS: 17.4 versions prior to 17.4R2; 18.1 versions prior to 18.1R2.

xgrammar is an open-source library for efficient, flexible, and portable structured generation. A grammar optimizer introduced in 0.1.23 processes large grammars (>100k characters) at very low rates, and can be used for DOS of model providers. This issue is fixed in version 0.1.24.

Allocation of Resources Without Limits or Throttling vulnerability in Apache Software Foundation Apache Struts.This issue affects Apache Struts: through 2.5.30, through 6.1.2. Upgrade to Struts 2.5.31 or 6.1.2.1 or greater

Vulnerability of system restart triggered by abnormal callbacks passed to APIs.Successful exploitation of this vulnerability may cause the system to restart.

An Environment (CWE-2) vulnerability exists in SoMachine Basic, all versions, and Modicon M221(all references, all versions prior to firmware V1.10.0.0) which could cause cycle time impact when flooding the M221 ethernet interface while the Ethernet/IP adapter is activated.

@fastify/accepts-serializer cached serializer-selection results keyed by the request Accept header without a size limit or eviction policy. A remote unauthenticated client could send many distinct but matching Accept header variants to make the cache grow unbounded, eventually exhausting the Node.js heap and crashing the process. Versions <= 6.0.3 are affected. Update to 6.0.4 or later, which bounds the cache via an LRU with a default size of 100 entries, configurable through the new cacheSize plugin option.

An Allocation of Resources Without Limits or Throttling vulnerability in SUSE k3s allows attackers with access to K3s servers' apiserver/supervisor port (TCP 6443) cause denial of service. This issue affects k3s: from v1.24.0 before v1.24.17+k3s1, from v1.25.0 before v1.25.13+k3s1, from v1.26.0 before v1.26.8+k3s1, from sev1.27.0 before v1.27.5+k3s1, from v1.28.0 before v1.28.1+k3s1.

There is a Memory leakage vulnerability in Smartphone.Successful exploitation of this vulnerability may cause memory exhaustion.

A denial of service vulnerability was identified in GitHub Enterprise Server that allowed an unauthenticated attacker to cause service disruption by sending crafted requests with deeply nested JSON payloads to an unauthenticated API endpoint. The endpoint parsed user-controlled JSON request bodies without size or depth limits, causing excessive CPU and memory consumption. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.21 and was fixed in versions 3.20.2, 3.19.6, 3.18.9, 3.17.15, and 3.16.18. This vulnerability was reported via the GitHub Bug Bounty program.

Vault is vulnerable to a denial-of-service condition where an unauthenticated attacker can repeatedly initiate or cancel root token generation or rekey operations, occupying the single in-progress operation slot. This prevents legitimate operators from completing these workflows. This vulnerability, CVE-2026-5807, is fixed in Vault Community Edition 2.0.0 and Vault Enterprise 2.0.0.

A memory exhaustion vulnerability exists in the HTTP server due to unbounded use of the `Content-Length` header. The server allocates memory directly based on the attacker supplied header value without enforcing an upper limit. A crafted HTTP request containing an extremely large `Content-Length` value can trigger excessive memory allocation and server termination, even without sending a request body.

A flaw was found in EAP-7 during deserialization of certain classes, which permits instantiation of HashMap and HashTable with no checks on resources consumed. This issue could allow an attacker to submit malicious requests using these classes, which could eventually exhaust the heap and result in a Denial of Service.

A gzip decompression bomb vulnerability exists when Orthanc processes HTTP request with `Content-Encoding: gzip`. The server does not enforce limits on decompressed size and allocates memory based on attacker-controlled compression metadata. A specially crafted gzip payload can trigger excessive memory allocation and exhaust system memory.

A memory exhaustion vulnerability exists in ZIP archive processing. Orthanc automatically extracts ZIP archives uploaded to certain endpoints and trusts metadata fields describing the uncompressed size of archived files. An attacker can craft a small ZIP archive containing a forged size value, causing the server to allocate extremely large buffers during extraction.

Rekor is an open source software supply chain transparency log. Rekor prior to version 1.1.1 may crash due to out of memory (OOM) conditions caused by reading archive metadata files into memory without checking their sizes first. Verification of a JAR file submitted to Rekor can cause an out of memory crash if files within the META-INF directory of the JAR are sufficiently large. Parsing of an APK file submitted to Rekor can cause an out of memory crash if the .SIGN or .PKGINFO files within the APK are sufficiently large. The OOM crash has been patched in Rekor version 1.1.1. There are no known workarounds.

By design, BIND is intended to limit the number of TCP clients that can be connected at any given time. The number of allowed connections is a tunable parameter which, if unset, defaults to a conservative value for most servers. Unfortunately, the code which was intended to limit the number of simultaneous connections contained an error which could be exploited to grow the number of simultaneous connections beyond this limit. Versions affected: BIND 9.9.0 -> 9.10.8-P1, 9.11.0 -> 9.11.6, 9.12.0 -> 9.12.4, 9.14.0. BIND 9 Supported Preview Edition versions 9.9.3-S1 -> 9.11.5-S3, and 9.11.5-S5. Versions 9.13.0 -> 9.13.7 of the 9.13 development branch are also affected. Versions prior to BIND 9.9.0 have not been evaluated for vulnerability to CVE-2018-5743.

An issue was discovered in Prosody before 0.12.6 and 1.0.0 through 13.0.0 before 13.0.5. A Denial of Service can occur via memory exhaustion caused by XML parsing resource amplification from unauthenticated connections.

TiKV 6.1.2 allows remote attackers to cause a denial of service (fatal error, with RpcStatus UNAVAILABLE for "not leader") upon an attempt to start a node in a situation where the context deadline is exceeded

Any request send to a Netgear Nighthawk Wifi6 Router (RAX30)'s web service containing a “Content-Type” of “multipartboundary=” will result in the request body being written to “/tmp/mulipartFile” on the device itself. A sufficiently large file will cause device resources to be exhausted, resulting in the device becoming unusable until it is rebooted.

In GraphQL Java (aka graphql-java) before 20.1, an attacker can send a crafted GraphQL query that causes stack consumption. The fixed versions are 20.1, 19.4, 18.4, 17.5, and 0.0.0-2023-03-20T01-49-44-80e3135.

basic-ftp is an FTP client for Node.js. Versions prior to 5.3.0 are vulnerable to denial of service through unbounded memory growth while processing directory listings from a remote FTP server. A malicious or compromised server can send an extremely large or never-ending listing response to `Client.list()`, causing the client process to consume memory until it becomes unstable or crashes. Version 5.3.0 fixes the issue.

sshpk is vulnerable to ReDoS when parsing crafted invalid public keys.

Fastify node module before 0.38.0 is vulnerable to a denial-of-service attack by sending a request with "Content-Type: application/json" and a very large payload.

n8n is an open source workflow automation platform. Prior to versions 1.123.32, 2.17.4, and 2.18.1, the MCP OAuth client registration endpoint accepted unauthenticated requests and stored client data without adequate resource controls. An unauthenticated remote attacker could exhaust server memory resources by sending large registration payloads, rendering the n8n instance unavailable. The MCP enable/disable toggle gates MCP access but did not restrict client registrations, meaning the endpoint is reachable regardless of whether MCP access is enabled on the instance. This issue has been patched in versions 1.123.32, 2.17.4, and 2.18.1.

Every `named` instance configured to run as a recursive resolver maintains a cache database holding the responses to the queries it has recently sent to authoritative servers. The size limit for that cache database can be configured using the `max-cache-size` statement in the configuration file; it defaults to 90% of the total amount of memory available on the host. When the size of the cache reaches 7/8 of the configured limit, a cache-cleaning algorithm starts to remove expired and/or least-recently used RRsets from the cache, to keep memory use below the configured limit. It has been discovered that the effectiveness of the cache-cleaning algorithm used in `named` can be severely diminished by querying the resolver for specific RRsets in a certain order, effectively allowing the configured `max-cache-size` limit to be significantly exceeded. This issue affects BIND 9 versions 9.11.0 through 9.16.41, 9.18.0 through 9.18.15, 9.19.0 through 9.19.13, 9.11.3-S1 through 9.16.41-S1, and 9.18.11-S1 through 9.18.15-S1.

Trustwave ModSecurity 3.0.5 through 3.0.8 before 3.0.9 allows a denial of service (worker crash and unresponsiveness) because some inputs cause a segfault in the Transaction class for some configurations.

pgjdbc is an open source postgresql JDBC Driver. From version 42.2.0 to before version 42.7.11, pgjdbc is vulnerable to a client-side denial of service during SCRAM-SHA-256 authentication. A malicious server can instruct the driver to perform SCRAM authentication with a very large iteration count. With a large enough value, the client spends an unbounded amount of CPU time inside PBKDF2 before authentication can fail. A single attempt ties up a CPU core. Repeated or concurrent attempts exhaust client CPU and can wedge connection pools. In affected versions, loginTimeout did not fully mitigate this problem. When loginTimeout expired, the caller could stop waiting, but the worker thread performing the connection attempt could continue running and burning CPU inside the SCRAM PBKDF2 computation. This issue has been patched in version 42.7.11.

Russh is a Rust SSH client & server library. Prior to version 0.60.1, a pre-authentication denial-of-service vulnerability exists in the server's keyboard-interactive authentication handler. A malicious client can crash any russh-based server that implements keyboard-interactive auth (e.g., for 2FA/TOTP) with a single malformed packet, requiring no credentials. This issue has been patched in version 0.60.1.

OpenClaw before 2026.3.31 contains an incomplete fix for CVE-2026-32062 where the voice-call component parses large WebSocket frames before start validation. Remote attackers can send oversized pre-start WebSocket frames to cause resource consumption and denial of service.

An issue found in DUALSPACE Super Secuirty v.2.3.7 allows an attacker to cause a denial of service via the SharedPreference files.

`silverstripe/graphql` serves Silverstripe data as GraphQL representations. In versions 4.2.2 and 4.1.1, an attacker could use a specially crafted graphql query to execute a denial of service attack against a website which has a publicly exposed graphql endpoint. This mostly affects websites with particularly large/complex graphql schemas. Users should upgrade to `silverstripe/graphql` 4.2.3 or 4.1.2 to remedy the vulnerability.

Jenkins 2.393 and earlier, LTS 2.375.3 and earlier uses the Apache Commons FileUpload library without specifying limits for the number of request parts introduced in version 1.5 for CVE-2023-24998 in org.kohsuke.stapler.RequestImpl, allowing attackers to trigger a denial of service.

Unfurl before 2026.04 contains an unbounded zlib decompression vulnerability in parse_compressed.py that allows remote attackers to cause denial of service. Attackers can submit highly compressed payloads via URL parameters to the /json/visjs endpoint that expand to gigabytes, exhausting server memory and crashing the service.

SvelteKit is a framework for rapidly developing robust, performant web applications using Svelte. Prior to 2.57.1, under certain circumstances, requests could bypass the BODY_SIZE_LIMIT on SvelteKit applications running with adapter-node. This bypass does not affect body size limits at other layers of the application stack, so limits enforced in the WAF, gateway, or at the platform level are unaffected. This vulnerability is fixed in 2.57.1.

Varnish Enterprise before 6.0.16r12 allows a "workspace overflow" denial of service (daemon panic) for shared VCL. The headerplus.write_req0() function from vmod_headerplus updates the underlying req0, which is normally the original read-only request from which req is derived (readable and writable from VCL). This is useful in the active VCL, after amending req, to prepare a refined req0 before switching to a different VCL with the return (vcl(<label>)) action. This is for example how the Varnish Controller operates shared VCL deployments. If the amended req contained too many header fields for req0, this would have resulted in a workspace overflow that would in turn trigger a panic and crash the Varnish Enterprise server. This could be used as a Denial of Service attack vector by malicious clients.

Allocation of Resources Without Limits or Throttling in GitHub repository ikus060/rdiffweb prior to 2.4.8.

PraisonAI is a multi-agent teams system. Prior to 4.5.128, the WSGI-based recipe registry server (server.py) reads the entire HTTP request body into memory based on the client-supplied Content-Length header with no upper bound. Combined with authentication being disabled by default (no token configured), any local process can send arbitrarily large POST requests to exhaust server memory and cause a denial of service. The Starlette-based server (serve.py) has RequestSizeLimitMiddleware with a 10MB limit, but the WSGI server lacks any equivalent protection. This vulnerability is fixed in 4.5.128.

In Qt through 5.14.1, the WebSocket implementation accepts up to 2GB for frames and 2GB for messages. Smaller limits cannot be configured. This makes it easier for attackers to cause a denial of service (memory consumption).

IBM Watson CP4D Data Stores 4.6.0 does not properly allocate resources without limits or throttling which could allow a remote attacker with information specific to the system to cause a denial of service. IBM X-Force ID: 248924.

Pillow is a Python imaging library. Versions 10.3.0 through 12.1.1 did not limit the amount of GZIP-compressed data read when decoding a FITS image, making them vulnerable to decompression bomb attacks. A specially crafted FITS file could cause unbounded memory consumption, leading to denial of service (OOM crash or severe performance degradation). If users are unable to immediately upgrade, they should only open specific image formats, excluding FITS, as a workaround.

An unauthenticated remote attacker can cause a DoS in the controller due to uncontrolled resource consumption.

OpenClaw versions 2026.4.9 before 2026.4.10 contain a denial of service vulnerability in the voice-call realtime WebSocket path that accepts oversized frames without proper validation. Remote attackers can send oversized WebSocket frames to cause service unavailability for deployments exposing the webhook path.

An issue found in POWERAMP 925-bundle-play and Poweramp 954-uni allows a remote attacker to cause a denial of service via the Rescan button in Queue and Select Folders button in Library

Rack is a modular Ruby web server interface. Prior to versions 2.2.23, 3.1.21, and 3.2.6, Rack::Utils.get_byte_ranges parses the HTTP Range header without limiting the number of individual byte ranges. Although the existing fix for CVE-2024-26141 rejects ranges whose total byte coverage exceeds the file size, it does not restrict the count of ranges. An attacker can supply many small overlapping ranges such as 0-0,0-0,0-0,... to trigger disproportionate CPU, memory, I/O, and bandwidth consumption per request. This results in a denial of service condition in Rack file-serving paths that process multipart byte range responses. This issue has been patched in versions 2.2.23, 3.1.21, and 3.2.6.

Saleor is an e-commerce platform. From 2.0.0 to before 3.23.0a3, 3.22.47, 3.21.54, and 3.20.118, a malicious actor can include many GraphQL mutations or queries in a single API call using aliases or chaining multiple mutations, resulting in resource exhaustion. This vulnerability is fixed in 3.23.0a3, 3.22.47, 3.21.54, and 3.20.118.

libp2p-rust is the official rust language Implementation of the libp2p networking stack. Prior to 0.17.1, libp2p-rendezvous server has no limit on how many namespaces a single peer can register. A malicious peer can just keep registering unique namespaces in a loop and the server happily accepts every single one allocating memory for each registration with no pushback. Keep doing this long enough (or with multiple sybil peers) and the server process gets OOM killed. This vulnerability is fixed in 0.17.1.