Multiple vulnerabilities in the Cisco ATA 190 Series Analog Telephone Adapter Software could allow an attacker to perform a command injection attack resulting in remote code execution or cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

An issue was discovered in rConfig 3.9.2. An attacker can directly execute system commands by sending a GET request to search.crud.php because the catCommand parameter is passed to the exec function without filtering, which can lead to command execution.

Dell EMC prior to version DDOS 7.9 contain(s) an OS command injection Vulnerability. An authenticated non admin attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application.

A vulnerability was identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This affects the function RP_setBasicAuto of the file /goform/RP_setBasicAuto. The manipulation of the argument staticIp/staticNetmask leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in LB-LINK BL-X26 1.2.8. This affects an unknown function of the file /goform/set_blacklist of the component HTTP Handler. Such manipulation of the argument mac leads to os command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

jc21 NGINX Proxy Manager through 2.9.19 allows OS command injection. When creating an access list, the backend builds an htpasswd file with crafted username and/or password input that is concatenated without any validation, and is directly passed to the exec command, potentially allowing an authenticated attacker to execute arbitrary commands on the system. NOTE: this is not part of any NGINX software shipped by F5.

A problem was found in Centreon Web through 19.04.3. An authenticated command injection is present in the page include/configuration/configObject/traps-mibs/formMibs.php. This page is called from the Centreon administration interface. This is the mibs management feature that contains a file filing form. At the time of submission of a file, the mnftr parameter is sent to the page and is not filtered properly. This allows one to inject Linux commands directly.

cgi-bin/cgi_main in NUUO NVRmini 2 1.7.6 through 3.0.0 and NETGEAR ReadyNAS Surveillance 1.1.2 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the sn parameter to the transfer_license command.

FusionPBX 4.4.8 allows an attacker to execute arbitrary system commands by submitting a malicious command to the service_edit.php file (which will insert the malicious command into the database). To trigger the command, one needs to call the services.php file via a GET request with the service id followed by the parameter a=start to execute the stored command.

A remote arbitrary command execution vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.10.0, 6.9.6 and 6.8.9. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

EyesOfNetwork 5.1 allows Remote Command Execution via shell metacharacters in the module/tool_all/ host field.

A vulnerability was found in Byzoro Smart S80 up to 20240328. It has been declared as critical. This vulnerability affects unknown code of the file /log/webmailattach.php. The manipulation of the argument mail_file_path leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-259450 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered on D-Link DIR-823G devices with firmware V1.0.2B05. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the Interface field to SetStaticRouteSettings.

Multiple improper neutralization of special elements used in an OS Command ('OS Command Injection') vulnerabilities [CWE-78] in FortiWeb version 7.0.1 and below, 6.4 all versions, version 6.3.19 and below may allow an authenticated attacker to execute unauthorized code or commands via crafted parameters of HTTP requests.

Command injection in PAN-0S 9.0.2 and earlier may allow an authenticated attacker to gain access to a remote shell in PAN-OS, and potentially run with the escalated user’s permissions.

Nagios XI before 5.6.6 allows remote command execution as root. The exploit requires access to the server as the nagios user, or access as the admin user via the web interface. The getprofile.sh script, invoked by downloading a system profile (profile.php?cmd=download), is executed as root via a passwordless sudo entry; the script executes check_plugin, which is owned by the nagios user. A user logged into Nagios XI with permissions to modify plugins, or the nagios user on the server, can modify the check_plugin executable and insert malicious commands to execute as root.

Adtran 834-5 11.1.0.101-202106231430, and fixed as of SmartOS Version 12.6.3.1, devices allow OS Command Injection via shell metacharacters to the Ping or Traceroute utility.

Two OS command injection vulnerability exist in the vtysh_ubus toolsh_excute.constprop.1 functionality of Milesight UR32L v32.3.0.5. A specially-crafted network request can lead to command execution. An attacker can send a network request to trigger these vulnerabilities.This command injection is in the trace tool utility.

Possible Command Injection in iManager GET parameter has been discovered in OpenText™ iManager 3.2.6.0000.

In Bender/ebee Charge Controllers in multiple versions are prone to Command injection via Web interface. An authenticated attacker could enter shell commands into some input fields that are executed with root privileges.

A Remote Code Execution (RCE) issue in the addon CUx-Daemon 1.11a of the eQ-3 Homematic CCU-Firmware 2.35.16 until 2.45.6 allows remote authenticated attackers to execute system commands as root remotely via a simple HTTP request.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an authenticated remote command execution (RCE) vulnerability via the "mru" parameter in the "cstecgi.cgi" binary.

An OS command injection vulnerability has been reported to affect QNAP operating systems. If exploited, the vulnerability allows remote authenticated users to execute commands via susceptible QNAP devices. We have already fixed the vulnerability in the following versions: QTS 5.0.1.2376 build 20230421 and later QTS 4.5.4.2374 build 20230416 and later QuTS hero h5.0.1.2376 build 20230421 and later QuTS hero h4.5.4.2374 build 20230417 and later QuTScloud c5.0.1.2374 and later

A post-authentication remote command injection vulnerability in a CGI file in Western Digital My Cloud OS 5 devices that could allow an attacker to build files with redirects and execute larger payloads. This issue affects My Cloud OS 5 devices: before 5.26.300.

A remote arbitrary command execution vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.10.0, 6.9.6 and 6.8.9. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

An OS command injection vulnerability has been reported to affect QUSBCam2. If exploited, the vulnerability could allow users to execute commands via a network. We have already fixed the vulnerability in the following version: QUSBCam2 2.0.3 ( 2023/06/15 ) and later

Vulnerability in the CommandPost, Collector, and Sensor components of Fidelis Network and Deception enables an attacker with user level access to the CLI to inject root level commands into the component and neighboring Fidelis components. The vulnerability is present in Fidelis Network and Deception versions prior to 9.3.7 and in version 9.4. Patches and updates are available to address this vulnerability.

An OS command injection vulnerability exists in the vtysh_ubus _get_fw_logs functionality of Milesight UR32L v32.3.0.5. A specially crafted network request can lead to command execution. An attacker can send a network request to trigger this vulnerability.

A vulnerability, which was classified as critical, has been found in agno-agi agno up to 1.7.5. This issue affects the function MCPTools/MultiMCPTools in the library libs/agno/agno/tools/mcp.py of the component Model Context Protocol Handler. The manipulation of the argument command leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An OS command injection vulnerability exists in the vtysh_ubus tcpdump_start_cb functionality of Milesight UR32L v32.3.0.5. A specially crafted HTTP request can lead to command execution. An authenticated attacker can send an HTTP request to trigger this vulnerability.

An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication) via the action set_sta_enrollee_pin_5g and the key wps_sta_enrollee_pin.

An issue was discovered on D-Link DIR-818LW devices from 2.05.B03 to 2.06B01 BETA. There is a command injection in HNAP1 SetWanSettings via an XML injection of the value of the Gateway key.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an Improper Neutralization of Special Elements Used In A Command via the Data collection endpoint. An attacker with admin privileges can upload a specially crafted file to achieve remote code execution.

Multiple vulnerabilities in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands with elevated privileges on the affected device. For more information about these vulnerabilities, see the Details section of this advisory.

In OrangeHRM 4.3.1 and before, there is an input validation error within admin/listMailConfiguration (txtSendmailPath parameter) that allows authenticated attackers to achieve arbitrary command execution.

Improper Input Validation vulnerability in N-able N-central allows OS Command Injection.This issue affects N-central: before 2025.3.1.

A vulnerability was found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this vulnerability is the function setDeviceName of the file /goform/setDeviceName. The manipulation of the argument DeviceName leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered on D-Link DIR-823G devices with firmware 1.02B03. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the IPAddress or Gateway field to SetStaticRouteSettings.

Vulnerability in Fidelis Network and Deception CommandPost enables authenticated command injection through the web interface. The vulnerability could allow a specially crafted HTTP request to execute system commands on the CommandPost and return results in an HTTP response in an authenticated session. The vulnerability is present in Fidelis Network and Deception versions prior to 9.3.7 and in version 9.4. Patches and updates are available to address this vulnerability.

A vulnerability has been found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this issue is the function sub_3517C of the file /goform/setWan. The manipulation of the argument Hostname leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered in Softing uaGate SI 1.60.01. A CGI script is vulnerable to command injection with a maliciously crafted url parameter.

A remote arbitrary command execution vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.10.0, 6.9.6 and 6.8.9. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

A vulnerability was identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This issue affects the function RP_setBasic of the file /goform/RP_setBasic. The manipulation of the argument bssid leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A privilege escalation vulnerability exists in SolarWinds Serv-U before 15.1.7 for Linux.

The post-authentication command injection vulnerability in the Zyxel NBG6604 firmware version V1.01(ABIR.0)C0 could allow an authenticated attacker to execute some OS commands remotely by sending a crafted HTTP request.

An issue was discovered in LibreNMS through 1.47. There is a command injection vulnerability in html/includes/graphs/device/collectd.inc.php where user supplied parameters are filtered with the mysqli_escape_real_string function. This function is not the appropriate function to sanitize command arguments as it does not escape a number of command line syntax characters such as ` (backtick), allowing an attacker to inject commands into the variable $rrd_cmd, which gets executed via passthru().

Multiple authenticated command injection vulnerabilities exist in the command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

Grandstream GWN7610 before 1.0.8.18 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in the filename in a /ubus/controller.icc.update_nds_webroot_from_tmp update_nds_webroot_from_tmp API call.

KLog Server through 2.4.1 allows authenticated command injection. async.php calls shell_exec() on the original value of the source parameter.

Jenkins Git Client Plugin 2.8.4 and earlier and 3.0.0-rc did not properly restrict values passed as URL argument to an invocation of 'git ls-remote', resulting in OS command injection.