Jonathan Looney discovered that the TCP retransmission queue implementation in tcp_fragment in the Linux kernel could be fragmented when handling certain TCP Selective Acknowledgment (SACK) sequences. A remote attacker could use this to cause a denial of service. This has been fixed in stable kernel releases 4.4.182, 4.9.182, 4.14.127, 4.19.52, 5.1.11, and is fixed in commit f070ef2ac66716357066b683fb0baf55f8191a2e.

The web api server on Port 8080 of ASUS HG100 firmware up to 1.05.12, which is vulnerable to Slowloris HTTP Denial of Service: an attacker can cause a Denial of Service (DoS) by sending headers very slowly to keep HTTP or HTTPS connections and associated resources alive for a long period of time. CVSS 3.0 Base score 7.4 (Availability impacts). CVSS vector: (CVSS:3.0/AV:A/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H).

A regression was introduced in the Red Hat build of python-eventlet due to a change in the patch application strategy, resulting in a patch for CVE-2021-21419 not being applied for all builds of all products.

Apache Traffic Server is vulnerable to HTTP/2 setting flood attacks. Earlier versions of Apache Traffic Server didn't limit the number of setting frames sent from the client using the HTTP/2 protocol. Users should upgrade to Apache Traffic Server 7.1.7, 8.0.4, or later versions.

The package opcua from 0.0.0 are vulnerable to Denial of Service (DoS) due to a missing limitation on the number of received chunks - per single session or in total for all concurrent sessions. An attacker can exploit this vulnerability by sending an unlimited number of huge chunks (e.g. 2GB each) without sending the Final closing chunk.

Seroval facilitates JS value stringification, including complex structures beyond JSON.stringify capabilities. In versions 1.4.0 and below, serialization of objects with extreme depth can exceed the maximum call stack limit. In version 1.4.1, Seroval introduces a `depthLimit` parameter in serialization/deserialization methods. An error will be thrown if the depth limit is reached.

Traefik is an HTTP reverse proxy and load balancer. Prior to 2.11.35 and 3.6.7, there is a potential vulnerability in Traefik ACME TLS certificates' automatic generation: the ACME TLS-ALPN fast path can allow unauthenticated clients to tie up go routines and file descriptors indefinitely when the ACME TLS challenge is enabled. A malicious client can open many connections, send a minimal ClientHello with acme-tls/1, then stop responding, leading to denial of service of the entry point. The vulnerability is fixed in 2.11.35 and 3.6.7.

Suricata is a network IDS, IPS and NSM engine. Prior to versions 8.0.3 and 7.0.14, specially crafted traffic can cause Suricata to consume large amounts of memory while parsing DNP3 traffic. This can lead to the process slowing down and running out of memory, potentially leading to it getting killed by the OOM killer. Versions 8.0.3 or 7.0.14 contain a patch. As a workaround, disable the DNP3 parser in the suricata yaml (disabled by default).

pyasn1 is a generic ASN.1 library for Python. Prior to 0.6.2, a Denial-of-Service issue has been found that leads to memory exhaustion from malformed RELATIVE-OID with excessive continuation octets. This vulnerability is fixed in 0.6.2.

Undici is an HTTP/1.1 client for Node.js. Prior to 7.18.0 and 6.23.0, the number of links in the decompression chain is unbounded and the default maxHeaderSize allows a malicious server to insert thousands compression steps leading to high CPU usage and excessive memory allocation. This vulnerability is fixed in 7.18.0 and 6.23.0.

It was found that the fix for CVE-2018-14648 in 389-ds-base, versions 1.4.0.x before 1.4.0.17, was incorrectly applied in RHEL 7.5. An attacker would still be able to provoke excessive CPU consumption leading to a denial of service.

SvelteKit is a framework for rapidly developing robust, performant web applications using Svelte. From 2.49.0 to 2.49.4, the experimental form remote function uses a binary data format containing a representation of submitted form data. A specially-crafted payload can cause the server to allocate a large amount of memory, causing DoS via memory exhaustion. This vulnerability is fixed in 2.49.5.

seroval facilitates JS value stringification, including complex structures beyond JSON.stringify capabilities. In versions 1.4.0 and below, overriding encoded array lengths by replacing them with an excessively large value causes the deserialization process to significantly increase processing time. This issue has been fixed in version 1.4.1.

Mastodon is a free, open-source social network server based on ActivityPub. Mastodon versions before v4.3.18, v4.4.12, and v4.5.5 do not have a limit on the maximum number of poll options for remote posts, allowing attackers to create polls with a very large amount of options, greatly increasing resource consumption. Depending on the number of poll options, an attacker can cause disproportionate resource usage in both Mastodon servers and clients, potentially causing Denial of Service either server-side or client-side. Mastodon versions v4.5.5, v4.4.12, v4.3.18 are patched.

Suricata is a network IDS, IPS and NSM engine. Prior to versions 8.0.3 and 7.0.14, crafted DCERPC traffic can cause Suricata to expand a buffer w/o limits, leading to memory exhaustion and the process getting killed. While reported for DCERPC over UDP, it is believed that DCERPC over TCP and SMB are also vulnerable. DCERPC/TCP in the default configuration should not be vulnerable as the default stream depth is limited to 1MiB. Versions 8.0.3 and 7.0.14 contain a patch. Some workarounds are available. For DCERPC/UDP, disable the parser. For DCERPC/TCP, the `stream.reassembly.depth` setting will limit the amount of data that can be buffered. For DCERPC/SMB, the `stream.reassembly.depth` can be used as well, but is set to unlimited by default. Imposing a limit here may lead to loss of visibility in SMB.

Improper input handling in a system endpoint may allow attackers to overload resources, causing a denial of service.

vLLM is an inference and serving engine for large language models (LLMs). In versions from 0.6.4 to before 0.12.0, users can crash the vLLM engine serving multimodal models that use the Idefics3 vision model implementation by sending a specially crafted 1x1 pixel image. This causes a tensor dimension mismatch that results in an unhandled runtime error, leading to complete server termination. This issue has been patched in version 0.12.0.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Suricata can run out of memory when parsing crafted HTTP/2 traffic. Upgrade to 6.0.20 or 7.0.6.

An SRX Series Service Gateway configured for Unified Threat Management (UTM) may experience a system crash with the error message "mbuf exceed" -- an indication of memory buffer exhaustion -- due to the receipt of crafted HTTP traffic. Each crafted HTTP packet inspected by UTM consumes mbufs which can be identified through the following log messages: all_logs.0:Jun 8 03:25:03 srx1 node0.fpc4 : SPU3 jmpi mbuf stall 50%. all_logs.0:Jun 8 03:25:13 srx1 node0.fpc4 : SPU3 jmpi mbuf stall 51%. all_logs.0:Jun 8 03:25:24 srx1 node0.fpc4 : SPU3 jmpi mbuf stall 52%. ... Eventually the system runs out of mbufs and the system crashes (fails over) with the error "mbuf exceed". This issue only occurs when HTTP AV inspection is configured. Devices configured for Web Filtering alone are unaffected by this issue. Affected releases are Junos OS on SRX Series: 12.1X46 versions prior to 12.1X46-D81; 12.3X48 versions prior to 12.3X48-D77; 15.1X49 versions prior to 15.1X49-D101, 15.1X49-D110.

Some HTTP/2 implementations are vulnerable to a flood of empty frames, potentially leading to a denial of service. The attacker sends a stream of frames with an empty payload and without the end-of-stream flag. These frames can be DATA, HEADERS, CONTINUATION and/or PUSH_PROMISE. The peer spends time processing each frame disproportionate to attack bandwidth. This can consume excess CPU.

Allocation of Resources Without Limits or Throttling vulnerability in Apache Tomcat. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.0-M20, from 10.1.0-M1 through 10.1.24, from 9.0.13 through 9.0.89. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.35 through 8.5.100 and 7.0.92 through 7.0.109. Other EOL versions may also be affected. Users are recommended to upgrade to version 11.0.0-M21, 10.1.25, or 9.0.90, which fixes the issue. Apache Tomcat, under certain configurations on any platform, allows an attacker to cause an OutOfMemoryError by abusing the TLS handshake process.

apko allows users to build and publish OCI container images built from apk packages. From version 0.14.8 to before 1.1.1, an attacker who controls or compromises an APK repository used by apko could cause resource exhaustion on the build host. The ExpandApk function in pkg/apk/expandapk/expandapk.go expands .apk streams without enforcing decompression limits, allowing a malicious repository to serve a small, highly-compressed .apk that inflates into a large tar stream, consuming excessive disk space and CPU time, causing build failures or denial of service. This issue has been patched in version 1.1.1.

Specific IPv6 DHCP packets received by the jdhcpd daemon will cause a memory resource consumption issue to occur on a Junos OS device using the jdhcpd daemon configured to respond to IPv6 requests. Once started, memory consumption will eventually impact any IPv4 or IPv6 request serviced by the jdhcpd daemon, thus creating a Denial of Service (DoS) condition to clients requesting and not receiving IP addresses. Additionally, some clients which were previously holding IPv6 addresses will not have their IPv6 Identity Association (IA) address and network tables agreed upon by the jdhcpd daemon after the failover event occurs, which leads to more than one interface, and multiple IP addresses, being denied on the client. Affected releases are Juniper Networks Junos OS: 17.4 versions prior to 17.4R2; 18.1 versions prior to 18.1R2.

Joomla! 1.03 does not restrict the number of "Search" Mambots, which allows remote attackers to cause a denial of service (resource consumption) via a large number of Search Mambots.

Connections received from the proxy port may not count towards total accepted connections, resulting in server crashes if the total number of connections exceeds available resources. This only applies to connections accepted from the proxy port, pending the proxy protocol header.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Crafted modbus traffic can lead to unlimited resource accumulation within a flow. Upgrade to 7.0.6. Set a limited stream.reassembly.depth to reduce the issue.

In lunary-ai/lunary version 1.2.7, there is a lack of rate limiting on the forgot password page, leading to an email bombing vulnerability. Attackers can exploit this by automating forgot password requests to flood targeted user accounts with a high volume of password reset emails. This not only overwhelms the victim's mailbox, making it difficult to manage and locate legitimate emails, but also significantly impacts mail servers by consuming their resources. The increased load can cause performance degradation and, in severe cases, make the mail servers unresponsive or unavailable, disrupting email services for the entire organization.

webtransport-go is an implementation of the WebTransport protocol. From 0.3.0 to 0.9.0, an attacker can cause excessive memory consumption in webtransport-go's session implementation by sending a WT_CLOSE_SESSION capsule containing an excessively large Application Error Message. The implementation does not enforce the draft-mandated limit of 1024 bytes on this field, allowing a peer to send an arbitrarily large message payload that is fully read and stored in memory. This allows an attacker to consume an arbitrary amount of memory. The attacker must transmit the full payload to achieve the memory consumption, but the lack of any upper bound makes large-scale attacks feasible given sufficient bandwidth. This vulnerability is fixed in 0.10.0.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 8.0 before 18.6.6, 18.7 before 18.7.4, and 18.8 before 18.8.4 that, under certain conditions could have allowed an unauthenticated user to cause denial of service by uploading malicious files.

Uncontrolled resource consumption refers to a software vulnerability where a attacker or system uses excessive resources, such as CPU, memory, or network bandwidth, without proper limitations or controls. This can cause a denial-of-service (DoS) attack or degrade the performance of the affected system.

Mattermost fails to enforce a limit for the size of the cache entry for OpenGraph data allowing an attacker to send a specially crafted request to the /api/v4/opengraph filling the cache and turning the server unavailable.

A flaw was found in Undertow where malformed client requests can trigger server-side stream resets without triggering abuse counters. This issue, referred to as the "MadeYouReset" attack, allows malicious clients to induce excessive server workload by repeatedly causing server-side stream aborts. While not a protocol bug, this highlights a common implementation weakness that can be exploited to cause a denial of service (DoS).

Some HTTP/2 implementations are vulnerable to a settings flood, potentially leading to a denial of service. The attacker sends a stream of SETTINGS frames to the peer. Since the RFC requires that the peer reply with one acknowledgement per SETTINGS frame, an empty SETTINGS frame is almost equivalent in behavior to a ping. Depending on how efficiently this data is queued, this can consume excess CPU, memory, or both.

Allocation of Resources Without Limits or Throttling in the HDF5 weight loading component in Google Keras 3.0.0 through 3.13.0 on all platforms allows a remote attacker to cause a Denial of Service (DoS) through memory exhaustion and a crash of the Python interpreter via a crafted .keras archive containing a valid model.weights.h5 file whose dataset declares an extremely large shape.

nptd-rs is a tool for synchronizing your computer's clock, implementing the NTP and NTS protocols. There is a missing limit for accepted NTS-KE connections. This allows an unauthenticated remote attacker to crash ntpd-rs when an NTS-KE server is configured. Non NTS-KE server configurations, such as the default ntpd-rs configuration, are unaffected. This vulnerability has been patched in version 1.1.3.

An issue was discovered in 3S-Smart CODESYS V3 products. A crafted communication request may cause uncontrolled memory allocations in the affected CODESYS products and may result in a denial-of-service condition. All variants of the following CODESYS V3 products in all versions prior to v3.5.14.20 that contain the CmpGateway component are affected, regardless of the CPU type or operating system: CODESYS Control for BeagleBone, CODESYS Control for emPC-A/iMX6, CODESYS Control for IOT2000, CODESYS Control for Linux, CODESYS Control for PFC100, CODESYS Control for PFC200, CODESYS Control for Raspberry Pi, CODESYS Control V3 Runtime System Toolkit, CODESYS Gateway V3, CODESYS V3 Development System.

Synapse is an open-source Matrix homeserver. Synapse versions before 1.106 are vulnerable to a disk fill attack, where an unauthenticated adversary can induce Synapse to download and cache large amounts of remote media. The default rate limit strategy is insufficient to mitigate this. This can lead to a denial of service, ranging from further media uploads/downloads failing to completely unavailability of the Synapse process, depending on how Synapse was deployed. Synapse 1.106 introduces a new "leaky bucket" rate limit on remote media downloads to reduce the amount of data a user can request at a time. This does not fully address the issue, but does limit an unauthenticated user's ability to request large amounts of data to be cached.

Keep-alive HTTP and HTTPS connections can remain open and inactive for up to 2 minutes in Node.js 6.16.0 and earlier. Node.js 8.0.0 introduced a dedicated server.keepAliveTimeout which defaults to 5 seconds. The behavior in Node.js 6.16.0 and earlier is a potential Denial of Service (DoS) attack vector. Node.js 6.17.0 introduces server.keepAliveTimeout and the 5-second default.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.7 before 18.7.4, and 18.8 before 18.8.4 that could have allowed an unauthenticated user to cause denial of service through CPU exhaustion by submitting specially crafted markdown files that trigger exponential processing in markdown preview.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 12.3 before 18.6.4, 18.7 before 18.7.2, and 18.8 before 18.8.2 that could have allowed an unauthenticated user to create a denial of service condition by sending repeated malformed SSH authentication requests.

An Environment (CWE-2) vulnerability exists in SoMachine Basic, all versions, and Modicon M221(all references, all versions prior to firmware V1.10.0.0) which could cause cycle time impact when flooding the M221 ethernet interface while the Ethernet/IP adapter is activated.

Similarly to CVE-2024-34055, Apache James is vulnerable to denial of service through the abuse of IMAP literals from both authenticated and unauthenticated users, which could be used to cause unbounded memory allocation and very long computations Version 3.7.6 and 3.8.2 restrict such illegitimate use of IMAP literals.

A flaw was found in Undertow. When an AJP request is sent that exceeds the max-header-size attribute in ajp-listener, JBoss EAP is marked in an error state by mod_cluster in httpd, causing JBoss EAP to close the TCP connection without returning an AJP response. This happens because mod_proxy_cluster marks the JBoss EAP instance as an error worker when the TCP connection is closed from the backend after sending the AJP request without receiving an AJP response, and stops forwarding. This issue could allow a malicious user could to repeatedly send requests that exceed the max-header-size, causing a Denial of Service (DoS).

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 10.8 before 18.6.6, 18.7 before 18.7.4, and 18.8 before 18.8.4 that, under certain conditions, could have allowed an unauthenticated user to cause denial of service by sending repeated GraphQL queries.

libp2p-rust is the official rust language Implementation of the libp2p networking stack. In versions prior to 0.45.1 an attacker node can cause a victim node to allocate a large number of small memory chunks, which can ultimately lead to the victim’s process running out of memory and thus getting killed by its operating system. When executed continuously, this can lead to a denial of service attack, especially relevant on a larger scale when run against more than one node of a libp2p based network. Users are advised to upgrade to `libp2p` `v0.45.1` or above. Users unable to upgrade should reference the DoS Mitigation page for more information on how to incorporate mitigation strategies, monitor their application, and respond to attacks: https://docs.libp2p.io/reference/dos-mitigation/.

Denial of Service issue in GraphQL endpoints in Gitlab EE/CE affecting all versions from 11.10 prior to 18.2.7, 18.3 prior to 18.3.3, and 18.4 prior to 18.4.1 allows unauthenticated users to potentially bypass query complexity limits leading to resource exhaustion and service disruption.

LibHTP is a security-aware parser for the HTTP protocol and the related bits and pieces. Prior to version 0.5.49, unbounded processing of HTTP request and response headers can lead to excessive CPU time and memory utilization, possibly leading to extreme slowdowns. This issue is addressed in 0.5.49.

In OpenDDS through 3.27, there is a segmentation fault for a DataWriter with a large value of resource_limits.max_samples. NOTE: the vendor's position is that the product is not designed to handle a max_samples value that is too large for the amount of memory on the system.

AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Versions 3.13.2 and below allow a zip bomb to be used to execute a DoS against the AIOHTTP server. An attacker may be able to send a compressed request that when decompressed by AIOHTTP could exhaust the host's memory. This issue is fixed in version 3.13.3.

Fastify node module before 0.38.0 is vulnerable to a denial-of-service attack by sending a request with "Content-Type: application/json" and a very large payload.