A vulnerability, which was classified as critical, was found in Tenda CH22 1.0.0.1. This affects the function formNatlimit of the file /goform/Natlimit. The manipulation of the argument page leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

thttpd 2007 has buffer underflow.

Dnsmasq 2.86 has a heap-based buffer overflow in answer_request (called from FuzzAnswerTheRequest and fuzz_rfc1035.c). NOTE: the vendor's position is that CVE-2021-45951 through CVE-2021-45957 "do not represent real vulnerabilities, to the best of our knowledge.

Netgear Inc WNR854T 1.5.2 (North America) contains a stack-based buffer overflow vulnerability in the parse_st_header function due to use of a request header parameter in a strncpy where size is determined based on the input specified. By sending a specially crafted packet, an attacker can take control of the program counter and hijack control flow of the program to execute arbitrary system commands.

A vulnerability was found in Tenda AC5 15.03.06.47. It has been classified as critical. Affected is the function formSetRebootTimer of the file /goform/SetRebootTimer. The manipulation of the argument rebootTime leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

There is a buffer overflow vulnerability in the underlying L2/L3 Management service that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's access point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

A vulnerability, which was classified as critical, was found in Tenda AC6 15.03.05.16. This affects the function formSetRebootTimer of the file /goform/SetRebootTimer. The manipulation of the argument rebootTime leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A Stack-based Buffer Overflow vulnerability exists in the Tenda AC15 V15.03.05.18_multi device via the list parameter in a post request in goform/SetIpMacBind.

LuaJIT through 2.1 and OpenRusty luajit2 before v2.1-20240626 have a stack-buffer-overflow in lj_strfmt_wfnum in lj_strfmt_num.c.

D-Link DI-7200GV2.E1 v21.04.09E1 was discovered to contain a stack overflow via the zn_jb parameter in the arp_sys.asp function.

A stack-based buffer overflow vulnerability exists in the MFER parsing functionality of The Biosig Project libbiosig 3.9.0 and Master Branch (35a819fa). A specially crafted MFER file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.This vulnerability manifests on line 9184 of biosig.c on the current master branch (35a819fa), when the Tag is 131: else if (tag==131) //0x83 { // Patient Age if (len!=7) fprintf(stderr,"Warning MFER tag131 incorrect length %i!=7\n",len); curPos += ifread(buf,1,len,hdr);

An exploitable stack buffer overflow vulnerability exists in the MQTT packet parsing functionality of Cesanta Mongoose 6.8. A specially crafted MQTT SUBSCRIBE packet can cause a stack buffer overflow resulting in remote code execution. An attacker needs to send a specially crafted MQTT packet over the network to trigger this vulnerability.

Tenda AC7 V1.0 V15.03.06.44 was discovered to contain a stack overflow via parameter security_5g at url /goform/WifiBasicSet.

A stack-based buffer overflow vulnerability exists in the MFER parsing functionality of The Biosig Project libbiosig 3.9.0 and Master Branch (35a819fa). A specially crafted MFER file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.This vulnerability manifests on line 8824 of biosig.c on the current master branch (35a819fa), when the Tag is 11: else if (tag==11) //0x0B { // Fs if (len>6) fprintf(stderr,"Warning MFER tag11 incorrect length %i>6\n",len); double fval; curPos += ifread(buf,1,len,hdr);

An exploitable code execution vulnerability exists in the SavePatientMontage functionality of Natus Xltek NeuroWorks 8. A specially crafted network packet can cause a stack buffer overflow resulting in code execution. An attacker can a malicious packet to trigger this vulnerability.

A vulnerability was found in D-Link DIR-816 1.10CNB05. It has been classified as critical. This affects the function qosClassifier of the file /goform/qosClassifier. The manipulation of the argument dip_address/sip_address leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in TOTOLINK EX1200T 4.1.2cu.5232_B20210713. This issue affects the function setLanguageCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument LangType leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

NSS (Network Security Services) versions prior to 3.73 or 3.68.1 ESR are vulnerable to a heap overflow when handling DER-encoded DSA or RSA-PSS signatures. Applications using NSS for handling signatures encoded within CMS, S/MIME, PKCS \#7, or PKCS \#12 are likely to be impacted. Applications using NSS for certificate validation or other TLS, X.509, OCSP or CRL functionality may be impacted, depending on how they configure NSS. *Note: This vulnerability does NOT impact Mozilla Firefox.* However, email clients and PDF viewers that use NSS for signature verification, such as Thunderbird, LibreOffice, Evolution and Evince are believed to be impacted. This vulnerability affects NSS < 3.73 and NSS < 3.68.1.

An exploitable heap buffer overflow vulnerability exists in the X509 certificate parsing functionality of InsideSecure MatrixSSL 3.8.7b. A specially crafted x509 certificate can cause a buffer overflow on the heap resulting in remote code execution. To trigger this vulnerability, a specially crafted x509 certificate must be presented to the vulnerable client or server application when initiating secure connection.

A stack-based buffer overflow vulnerability exists in the MFER parsing functionality of The Biosig Project libbiosig 3.9.0 and Master Branch (35a819fa). A specially crafted MFER file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.This vulnerability manifests on line 8779 of biosig.c on the current master branch (35a819fa), when the Tag is 6: else if (tag==6) // 0x06 "number of sequences" { // NRec if (len>4) fprintf(stderr,"Warning MFER tag6 incorrect length %i>4\n",len); curPos += ifread(buf,1,len,hdr);

An exploitable stack-based buffer overflow vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera. A specially crafted http request can cause a stack-based buffer overflow resulting in overwriting arbitrary data on the stack frame. An attacker can simply send an http request to the device to trigger this vulnerability.

D-Link DIR-645 1.03 A1 is vulnerable to Buffer Overflow. The hnap_main function in the cgibin handler uses sprintf to format the soapaction header onto the stack and has no limit on the size.

An exploitable heap buffer overflow vulnerability exists in the X509 certificate parsing functionality of InsideSecure MatrixSSL 3.8.7b. A specially crafted x509 certificate can cause a buffer overflow on the heap resulting in remote code execution. To trigger this vulnerability, a specially crafted x509 certificate must be presented to the vulnerable client or server application when initiating secure connection.

An exploitable code execution vulnerability exists in the NewProducerStream functionality of Natus Xltek NeuroWorks 8. A specially crafted network packet can cause a stack buffer overflow resulting in code execution. An attacker can send a malicious packet to trigger this vulnerability.

An exploitable stack based buffer overflow vulnerability exists in the GNOME libsoup 2.58. A specially crafted HTTP request can cause a stack overflow resulting in remote code execution. An attacker can send a special HTTP request to the vulnerable server to trigger this vulnerability.

Thunderbird versions prior to 91.3.0 are vulnerable to the heap overflow described in CVE-2021-43527 when processing S/MIME messages. Thunderbird versions 91.3.0 and later will not call the vulnerable code when processing S/MIME messages that contain certificates with DER-encoded DSA or RSA-PSS signatures.

An exploitable stack buffer overflow vulnerability exists in the iocheckd service ''I/O-Check'' functionality of WAGO PFC200 Firmware version 03.01.07(13), WAGO PFC200 Firmware version 03.00.39(12) and WAGO PFC100 Firmware version 03.00.39(12). A specially crafted set of packets can cause a stack buffer overflow, resulting in code execution. An attacker can send unauthenticated packets to trigger this vulnerability.

An exploitable Code Execution vulnerability exists in the RequestForPatientInfoEEGfile functionality of Natus Xltek NeuroWorks 8. A specially crafted network packet can cause a stack buffer overflow resulting in arbitrary command execution. An attacker can send a malicious packet to trigger this vulnerability.

Commvault Edge Communication Service (cvd) prior to version 11 SP7 or version 11 SP6 with hotfix 590 is prone to a stack-based buffer overflow vulnerability that could lead to arbitrary code execution with administrative privileges.

A stack-based buffer overflow vulnerability exists in the MFER parsing functionality of The Biosig Project libbiosig 3.9.0 and Master Branch (35a819fa). A specially crafted MFER file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.This vulnerability manifests on line 8842 of biosig.c on the current master branch (35a819fa), when the Tag is 12: else if (tag==12) //0x0C { // sampling resolution if (len>6) fprintf(stderr,"Warning MFER tag12 incorrect length %i>6\n",len); val32 = 0; int8_t v8; curPos += ifread(&UnitCode,1,1,hdr); curPos += ifread(&v8,1,1,hdr); curPos += ifread(buf,1,len-2,hdr); In addition to values of `len` greater than 130 triggering a buffer overflow, a value of `len` smaller than 2 will also trigger a buffer overflow due to an integer underflow when computing `len-2` in this code path.

A vulnerability, which was classified as critical, has been found in TOTOLINK X15 1.0.0-B20230714.1105. Affected by this issue is the function formMapReboot of the file /boafrm/formMapReboot. The manipulation of the argument deviceMacAddr leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Tenda AC8 v4 US_AC8V4.0si_V16.03.34.06_cn was discovered to contain a stack overflow via parameter list and bindnum at /goform/SetIpMacBind.

Squid is a caching proxy for the Web. In versions 6.3 and below, Squid is vulnerable to a heap buffer overflow and possible remote code execution attack when processing URN due to incorrect buffer management. This has been fixed in version 6.4. To work around this issue, disable URN access permissions.

A stack-based buffer overflow vulnerability exists in the MFER parsing functionality of The Biosig Project libbiosig 3.9.0 and Master Branch (35a819fa). A specially crafted MFER file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.This vulnerability manifests on line 8744 of biosig.c on the current master branch (35a819fa), when the Tag is 3: else if (tag==3) { // character code char v[17]; // [1] if (len>16) fprintf(stderr,"Warning MFER tag2 incorrect length %i>16\n",len); curPos += ifread(&v,1,len,hdr); v[len] = 0; In this case, the overflowed buffer is the newly-declared `v` \[1\] instead of `buf`. Since `v` is only 17 bytes large, much smaller values of `len` (even those encoded using a single octet) can trigger an overflow in this code path.

ARM astcenc 3.2.0 is vulnerable to Buffer Overflow. When the compression function of the astc-encoder project with -cl option was used, a stack-buffer-overflow occurred in function encode_ise() in function compress_symbolic_block_for_partition_2planes() in "/Source/astcenc_compress_symbolic.cpp".

An exploitable code execution vulnerability exists in the OpenProducer functionality of Natus Xltek NeuroWorks 8. A specially crafted network packet can cause a stack buffer overflow resulting in code execution. An attacker can send a malicious packet to trigger this vulnerability.

Stack overflow in PJSUA API when calling pjsua_recorder_create. An attacker-controlled 'filename' argument may cause a buffer overflow since it is copied to a fixed-size stack buffer without any size validation.

A vulnerability was found in D-Link DIR-816 1.10CNB05 and classified as critical. Affected by this issue is the function wirelessApcli_5g of the file /goform/wirelessApcli_5g. The manipulation of the argument apcli_mode_5g/apcli_enc_5g/apcli_default_key_5g leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formWlanSetup function via the parameter f_wds_wepKey.

A stack-based buffer overflow vulnerability exists in the MFER parsing functionality of The Biosig Project libbiosig 3.9.0 and Master Branch (35a819fa). A specially crafted MFER file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.This vulnerability manifests on line 9205 of biosig.c on the current master branch (35a819fa), when the Tag is 133: else if (tag==133) //0x85 { curPos += ifread(buf,1,len,hdr);

A vulnerability was found in D-Link DIR-816 1.10CNB05. It has been declared as critical. This vulnerability affects the function QoSPortSetup of the file /goform/QoSPortSetup. The manipulation of the argument port0_group/port0_remarker/ssid0_group/ssid0_remarker leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

iSNS Server Memory Corruption Vulnerability Can Lead to Remote Code Execution

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formSysCmd function via the submit-url parameter.

Stack overflow in PJSUA API when calling pjsua_player_create. An attacker-controlled 'filename' argument may cause a buffer overflow since it is copied to a fixed-size stack buffer without any size validation.

A vulnerability has been found in D-Link DIR-816 1.10CNB05 and classified as critical. This vulnerability affects unknown code of the file /goform/form2lansetup.cgi. The manipulation of the argument ip leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

An issue was discovered in Foxit PhantomPDF before 8.3.11. It has an out-of-bounds write when Internet Explorer is used.

Stack overflow in PJSUA API when calling pjsua_playlist_create. An attacker-controlled 'file_names' argument may cause a buffer overflow since it is copied to a fixed-size stack buffer without any size validation.

A stack-based buffer overflow vulnerability exists in the MFER parsing functionality of The Biosig Project libbiosig 3.9.0 and Master Branch (35a819fa). A specially crafted MFER file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.This vulnerability manifests on line 9141 of biosig.c on the current master branch (35a819fa), when the Tag is 67: else if (tag==67) //0x43: Sample skew { int skew=0; // [1] curPos += ifread(&skew, 1, len,hdr); In this case, the address of the newly-defined integer `skew` \[1\] is overflowed instead of `buf`. This means a stack overflow can occur using much smaller values of `len` in this code path.

The issue was addressed with improved memory handling. This issue is fixed in watchOS 11.2, visionOS 2.2, tvOS 18.2, macOS Sequoia 15.2, Safari 18.2, iOS 18.2 and iPadOS 18.2. Processing maliciously crafted web content may lead to memory corruption.