An issue was discovered on Western Digital My Cloud OS 5 devices before 5.07.118. A NAS Admin authentication bypass vulnerability could allow an unauthenticated user to gain access to the device.

An issue was discovered on Western Digital My Cloud OS 5 devices before 5.06.115. A NAS Admin authentication bypass vulnerability could allow an unauthenticated user to execute privileged commands on the device via a cookie, because of insufficient validation of URI paths.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, RV130 VPN Router, RV130W Wireless-N Multifunction VPN Router, and RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary commands with administrative commands on an affected device. The vulnerability is due to improper session management on affected devices. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected device. A successful exploit could allow the attacker to gain administrative access on the affected device.

ask_password in Tomb 2.0 through 2.7 returns a warning when pinentry-curses is used and $DISPLAY is non-empty, causing affected users' files to be encrypted with "tomb {W] Detected DISPLAY, but only pinentry-curses is found." as the encryption key.

On Western Digital My Cloud OS 5 devices before 5.06.115, the NAS Admin dashboard has an authentication bypass vulnerability that could allow an unauthenticated user to execute privileged commands on the device.

A condition exists in FlashArray Purity whereby an attacker can employ a privileged account allowing remote access to the array.

An Authentication Bypass vulnerability in Belkin N300 (F7D7301v1) router allows remote attackers to bypass authentication using "Javascript debugging."

Belkin N900 router (F9K1104v1) contains an Authentication Bypass using "Javascript debugging".

OpUtils in Zoho ManageEngine OpManager 12.5 before 125490 mishandles authentication for a few audit directories.

Loxone Miniserver devices with firmware before 11.1 (aka 11.1.9.3) are unable to use an authentication method that is based on the "signature of the update package." Therefore, these devices (or attackers who are spoofing these devices) can continue to use an unauthenticated cloud service for an indeterminate time period (possibly forever). Once an individual device's firmware is updated, and authentication occurs once, the cloud service recategorizes the device so that authentication is subsequently always required, and spoofing cannot occur.

Netgear WNR1000v3 with firmware before 1.0.2.60 contains an Authentication Bypass via the NtgrBak key.

An Authentication Bypass vulnerability exists in Gitea before 1.5.0, which could let a malicious user gain privileges. If captured, the TOTP code for the 2FA can be submitted correctly more than once.

An Authentication Bypass vulnerability exists in NETGEAR Centria WNDR4700 Firmware 1.0.0.34 in http://<router_ip>/apply.cgi?/hdd_usr_setup.htm that when visited by any user, authenticated or not, causes the router to no longer require a password to access the web administration portal.

Improper Authentication vulnerability in Mestres do WP Checkout Mestres WP allows Privilege Escalation.This issue affects Checkout Mestres WP: from n/a through 7.1.9.7.

MMP: All versions prior to v1.0.3, PTP C-series: Device versions prior to v2.8.6.1, and PTMP C-series and A5x: Device versions prior to v2.5.4.1 does not perform proper authorization and authentication checks on multiple API routes. An attacker may gain access to these API routes and achieve remote code execution, create a denial-of-service condition, and obtain sensitive information.

An issue was discovered on GL.iNet devices before version 4.5.0. There is an NGINX authentication bypass via Lua string pattern matching. This affects A1300 4.4.6, AX1800 4.4.6, AXT1800 4.4.6, MT3000 4.4.6, MT2500 4.4.6, MT6000 4.5.0, MT1300 4.3.7, MT300N-V2 4.3.7, AR750S 4.3.7, AR750 4.3.7, AR300M 4.3.7, and B1300 4.3.7.

A vulnerability in the IPSec VPN Server authentication functionality of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to bypass authentication controls and access the IPSec VPN network. This vulnerability is due to the improper implementation of the password validation algorithm. An attacker could exploit this vulnerability by logging in to the VPN from an affected device with crafted credentials. A successful exploit could allow the attacker to bypass authentication and access the IPSec VPN network. The attacker may obtain privileges that are the same level as an administrative user, depending on the crafted credentials that are used. Cisco has not released software updates that address this vulnerability.

In cPanel before 88.0.3, insecure RNDC credentials are used for BIND on a templated VM (SEC-549).

Monkey HTTP Daemon: broken user name authentication

CrateDB 5.5.1 is contains an authentication bypass vulnerability in the Admin UI component. After configuring password authentication and_ Local_ In the case of an address, identity authentication can be bypassed by setting the X-Real IP request header to a specific value and accessing the Admin UI directly using the default user identity.(https://github.com/crate/crate/issues/15231)

Improper Authentication vulnerability in Repute Infosystems BookingPress allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects BookingPress: from n/a through 1.0.74.

A security vulnerability has been identified in the HPE Edgeline Infrastructure Manager, also known as HPE Edgeline Infrastructure Management Software. The vulnerability could be remotely exploited to bypass remote authentication leading to execution of arbitrary commands, gaining privileged access, causing denial of service, and changing the configuration.

An issue was discovered in WildFly 10.1.2.Final. It is possible for an attacker to access the administration panel on TCP port 9990 without any authentication using "anonymous" access that is automatically created. Once logged in, a misconfiguration present by default (auto-deployment) permits an anonymous user to deploy a malicious .war file, leading to remote code execution. NOTE: the vendor indicates that anonymous access is not available in the default installation; however, it remains optional because there are several use cases for it, including development environments and network architectures that have a proxy server for access control to the WildFly server

Improper Authentication vulnerability in wp-buy Login as User or Customer (User Switching) allows Privilege Escalation.This issue affects Login as User or Customer (User Switching): from n/a through 3.8.

An issue was discovered on Dasan GPON home routers. It is possible to bypass authentication simply by appending "?images" to any URL of the device that requires authentication, as demonstrated by the /menu.html?images/ or /GponForm/diag_FORM?images/ URI. One can then manage the device.

An issue was discovered in Newland Nquire 1000 Interactive Kiosk version NQ1000-II_G_V1.00.011, allows remote attackers to escalate privileges and bypass authentication via incorrect access control in the web management portal.

An Authentication Bypass Vulnerability exists in DELL SonicWALL Analyzer 7.0, Global Management System (GMS) 4.1, 5.0, 5.1, 6.0, and 7.0; Universal Management Appliance (UMA) 5.1, 6.0, and 7.0 and ViewPoint 4.1, 5.0, 5.1, and 6.0 via the skipSessionCheck parameter to the UMA interface (/appliance/), which could let a remote malicious user obtain access to the root account.

An issue was discovered in ownCloud owncloud/core before 10.13.1. An attacker can access, modify, or delete any file without authentication if the username of a victim is known, and the victim has no signing-key configured. This occurs because pre-signed URLs can be accepted even when no signing-key is configured for the owner of the files. The earliest affected version is 10.6.0.

capsule-proxy is a reverse proxy for the capsule operator project. Affected versions are subject to a privilege escalation vulnerability which is based on a missing check if the user is authenticated based on the `TokenReview` result. All the clusters running with the `anonymous-auth` Kubernetes API Server setting disable (set to `false`) are affected since it would be possible to bypass the token review mechanism, interacting with the upper Kubernetes API Server. This privilege escalation cannot be exploited if you're relying only on client certificates (SSL/TLS). This vulnerability has been addressed in version 0.4.6. Users are advised to upgrade.

The authentication mechanism can be bypassed by overflowing the value of the Cookie "authentication" field, provided there is an active user session.

Improper Authentication vulnerability in Elementor Elementor Website Builder allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Elementor Website Builder: from n/a through 3.16.4.

Authentication Bypass by Assumed-Immutable Data vulnerability in Exagate SYSGuard 3001 allows Authentication Bypass.This issue affects SYSGuard 3001: before 3.2.20.0.

PKCE was implemented in the OAuth implementation in workers-oauth-provider that is part of MCP framework https://github.com/cloudflare/workers-mcp . However, it was found that an attacker could cause the check to be skipped. Fixed in: https://github.com/cloudflare/workers-oauth-provider/pull/27 https://github.com/cloudflare/workers-oauth-provider/pull/27 Impact: PKCE is a defense-in-depth mechanism against certain kinds of attacks and was an optional extension in OAuth 2.0 which became required in the OAuth 2.1 draft. (Note that the MCP specification requires OAuth 2.1.). This bug completely bypasses PKCE protection.

Improper Authentication vulnerability in Apereo CAS in jakarta.servlet.http.HttpServletRequest.getRemoteAddr method allows Multi-Factor Authentication bypass.This issue affects CAS: through 7.0.0-RC7. It is unknown whether in new versions the issue will be fixed. For the date of publication there is no patch, and the vendor does not treat it as a vulnerability.

In TOTOLINK EX1200T firmware 4.1.2cu.5215, an attacker can bypass login by sending a specific request through formLoginAuth.htm.

A vulnerability in the login page of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to log in without credentials and access all roles without any restrictions. This vulnerability is due to exposed sensitive Security Assertion Markup Language (SAML) metadata. An attacker could exploit this vulnerability by using the exposed SAML metadata to bypass authentication to the user portal. A successful exploit could allow the attacker to access all roles without any restrictions.

Adobe FrameMaker Publishing Server versions 2022 and earlier are affected by an Improper Authentication vulnerability that could result in a Security feature bypass. An unauthenticated attacker can abuse this vulnerability to access the API and leak default admin's password. Exploitation of this issue does not require user interaction.

Dell DM5500 5.14.0.0 and prior contain an improper authentication vulnerability. A remote unauthenticated attacker could potentially exploit this vulnerability to gain access of resources or functionality that could possibly lead to execute arbitrary code.

User authentication with username and password credentials is ineffective in OpenText (Micro Focus) Visual COBOL, COBOL Server, Enterprise Developer, and Enterprise Server (including product variants such as Enterprise Test Server), versions 7.0 patch updates 19 and 20, 8.0 patch updates 8 and 9, and 9.0 patch update 1, when LDAP-based authentication is used with certain configurations. When the vulnerability is active, authentication succeeds with any valid username, regardless of whether the password is correct; it may also succeed with an invalid username (and any password). This allows an attacker with access to the product to impersonate any user. Mitigations: The issue is corrected in the upcoming patch update for each affected product. Product overlays and workaround instructions are available through OpenText Support. The vulnerable configurations are believed to be uncommon. Administrators can test for the vulnerability in their installations by attempting to sign on to a Visual COBOL or Enterprise Server component such as ESCWA using a valid username and incorrect password.

Inadequate validation of permissions when employing remote tools and macros within Devolutions Remote Desktop Manager versions 2023.2.19 and earlier permits a user to initiate a connection without proper execution rights via the remote tools feature.

A vulnerability in the external authentication functionality of Cisco Secure Email and Web Manager, formerly known as Cisco Security Management Appliance (SMA), and Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass authentication and log in to the web management interface of an affected device. This vulnerability is due to improper authentication checks when an affected device uses Lightweight Directory Access Protocol (LDAP) for external authentication. An attacker could exploit this vulnerability by entering a specific input on the login page of the affected device. A successful exploit could allow the attacker to gain unauthorized access to the web-based management interface of the affected device.

DataEase is an open source business intelligence and data visualization tool. Prior to version 2.10.10, secret verification does not take effect successfully, so a user can use any secret to forge a JWT token. The vulnerability has been fixed in v2.10.10. No known workarounds are available.

DMA Softlab Radius Manager 4.4.0 assigns the same session cookie to every admin session. The cookie is valid when the admin is logged in, but is invalid (temporarily) during times when the admin is logged out. In other words, the cookie is functionally equivalent to a static password, and thus provides permanent access if stolen.

An authentication bypass in Zultys MX-SE, MX-SE II, MX-E, MX-Virtual, MX250, and MX30 with firmware versions prior to 17.0.10 patch 17161 and 16.04 patch 16109 allows an unauthenticated attacker to obtain an administrative session via a protection mechanism failure in the authentication function. In normal operation, the Zultys MX Administrator Windows client connects to port 7505 and attempts authentication, submitting the administrator username and password to the server. Upon authentication failure, the server sends a login failure message prompting the client to disconnect. However, if the client ignores the failure message instead and attempts to continue, the server does not forcibly close the connection and processes all subsequent requests from the client as if authentication had been successful.

A vulnerability has been found in qinguoyi TinyWebServer up to 1.0 and classified as critical. This vulnerability affects unknown code of the file http/http_conn.cpp. The manipulation of the argument m_url_real leads to improper authentication. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical has been found in ColumbiaSoft Document Locator. This affects an unknown part of the file /api/authentication/login of the component WebTools. The manipulation of the argument Server leads to improper authentication. It is possible to initiate the attack remotely. Upgrading to version 7.2 SP4 and 2021.1 is able to address this issue. It is recommended to upgrade the affected component. The identifier VDB-243729 was assigned to this vulnerability.

An issue was discovered in the MongoDB Simple LDAP plugin through 2020-10-02 for Percona Server when using the SimpleLDAP authentication in conjunction with Microsoft’s Active Directory, Percona has discovered a flaw that would allow authentication to complete when passing a blank value for the account password, leading to access against the service integrated with which Active Directory is deployed at the level granted to the authenticating account.

The Syrus4 IoT gateway utilizes an unsecured MQTT server to download and execute arbitrary commands, allowing a remote unauthenticated attacker to execute code on any Syrus4 device connected to the cloud service. The MQTT server also leaks the location, video and diagnostic data from each connected device. An attacker who knows the IP address of the server is able to connect and perform the following operations: * Get location data of the vehicle the device is connected to * Send CAN bus messages via the ECU module ( https://syrus.digitalcomtech.com/docs/ecu-1 https://syrus.digitalcomtech.com/docs/ecu-1 ) * Immobilize the vehicle via the safe-immobilizer module ( https://syrus.digitalcomtech.com/docs/system-tools#safe-immobilization https://syrus.digitalcomtech.com/docs/system-tools#safe-immobilization ) * Get live video through the connected video camera * Send audio messages to the driver ( https://syrus.digitalcomtech.com/docs/system-tools#apx-tts https://syrus.digitalcomtech.com/docs/system-tools#apx-tts )

JumpServer is an open source bastion host. When users enable MFA and use a public key for authentication, the Koko SSH server does not verify the corresponding SSH private key. An attacker could exploit a vulnerability by utilizing a disclosed public key to attempt brute-force authentication against the SSH service This issue has been patched in versions 3.6.5 and 3.5.6. Users are advised to upgrade. There are no known workarounds for this issue.

An issue was discovered on COROS PACE 3 devices through 3.0808.0. It identifies itself as a device without input or output capabilities, which results in the use of the Just Works pairing method. This method does not implement any authentication, which therefore allows machine-in-the-middle attacks. Furthermore, this lack of authentication allows attackers to interact with the device via BLE without requiring prior authorization.