In the Linux kernel, the following vulnerability has been resolved: netdevsim: prevent bad user input in nsim_dev_health_break_write() If either a zero count or a large one is provided, kernel can crash.

In the Linux kernel, the following vulnerability has been resolved: hv_netvsc: Fix panic during namespace deletion with VF The existing code move the VF NIC to new namespace when NETDEV_REGISTER is received on netvsc NIC. During deletion of the namespace, default_device_exit_batch() >> default_device_exit_net() is called. When netvsc NIC is moved back and registered to the default namespace, it automatically brings VF NIC back to the default namespace. This will cause the default_device_exit_net() >> for_each_netdev_safe loop unable to detect the list end, and hit NULL ptr: [ 231.449420] mana 7870:00:00.0 enP30832s1: Moved VF to namespace with: eth0 [ 231.449656] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 231.450246] #PF: supervisor read access in kernel mode [ 231.450579] #PF: error_code(0x0000) - not-present page [ 231.450916] PGD 17b8a8067 P4D 0 [ 231.451163] Oops: Oops: 0000 [#1] SMP NOPTI [ 231.451450] CPU: 82 UID: 0 PID: 1394 Comm: kworker/u768:1 Not tainted 6.16.0-rc4+ #3 VOLUNTARY [ 231.452042] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/21/2024 [ 231.452692] Workqueue: netns cleanup_net [ 231.452947] RIP: 0010:default_device_exit_batch+0x16c/0x3f0 [ 231.453326] Code: c0 0c f5 b3 e8 d5 db fe ff 48 85 c0 74 15 48 c7 c2 f8 fd ca b2 be 10 00 00 00 48 8d 7d c0 e8 7b 77 25 00 49 8b 86 28 01 00 00 <48> 8b 50 10 4c 8b 2a 4c 8d 62 f0 49 83 ed 10 4c 39 e0 0f 84 d6 00 [ 231.454294] RSP: 0018:ff75fc7c9bf9fd00 EFLAGS: 00010246 [ 231.454610] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 61c8864680b583eb [ 231.455094] RDX: ff1fa9f71462d800 RSI: ff75fc7c9bf9fd38 RDI: 0000000030766564 [ 231.455686] RBP: ff75fc7c9bf9fd78 R08: 0000000000000000 R09: 0000000000000000 [ 231.456126] R10: 0000000000000001 R11: 0000000000000004 R12: ff1fa9f70088e340 [ 231.456621] R13: ff1fa9f70088e340 R14: ffffffffb3f50c20 R15: ff1fa9f7103e6340 [ 231.457161] FS: 0000000000000000(0000) GS:ff1faa6783a08000(0000) knlGS:0000000000000000 [ 231.457707] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 231.458031] CR2: 0000000000000010 CR3: 0000000179ab2006 CR4: 0000000000b73ef0 [ 231.458434] Call Trace: [ 231.458600] <TASK> [ 231.458777] ops_undo_list+0x100/0x220 [ 231.459015] cleanup_net+0x1b8/0x300 [ 231.459285] process_one_work+0x184/0x340 To fix it, move the ns change to a workqueue, and take rtnl_lock to avoid changing the netdev list when default_device_exit_net() is using it.

In the Linux kernel, the following vulnerability has been resolved: net: hibmcge: fix the division by zero issue When the network port is down, the queue is released, and ring->len is 0. In debugfs, hbg_get_queue_used_num() will be called, which may lead to a division by zero issue. This patch adds a check, if ring->len is 0, hbg_get_queue_used_num() directly returns 0.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/migrate: prevent infinite recursion If the buf + offset is not aligned to XE_CAHELINE_BYTES we fallback to using a bounce buffer. However the bounce buffer here is allocated on the stack, and the only alignment requirement here is that it's naturally aligned to u8, and not XE_CACHELINE_BYTES. If the bounce buffer is also misaligned we then recurse back into the function again, however the new bounce buffer might also not be aligned, and might never be until we eventually blow through the stack, as we keep recursing. Instead of using the stack use kmalloc, which should respect the power-of-two alignment request here. Fixes a kernel panic when triggering this path through eudebug. v2 (Stuart): - Add build bug check for power-of-two restriction - s/EINVAL/ENOMEM/ (cherry picked from commit 38b34e928a08ba594c4bbf7118aa3aadacd62fff)

In the Linux kernel, the following vulnerability has been resolved: net: hibmcge: fix rtnl deadlock issue Currently, the hibmcge netdev acquires the rtnl_lock in pci_error_handlers.reset_prepare() and releases it in pci_error_handlers.reset_done(). However, in the PCI framework: pci_reset_bus - __pci_reset_slot - pci_slot_save_and_disable_locked - pci_dev_save_and_disable - err_handler->reset_prepare(dev); In pci_slot_save_and_disable_locked(): list_for_each_entry(dev, &slot->bus->devices, bus_list) { if (!dev->slot || dev->slot!= slot) continue; pci_dev_save_and_disable(dev); if (dev->subordinate) pci_bus_save_and_disable_locked(dev->subordinate); } This will iterate through all devices under the current bus and execute err_handler->reset_prepare(), causing two devices of the hibmcge driver to sequentially request the rtnl_lock, leading to a deadlock. Since the driver now executes netif_device_detach() before the reset process, it will not concurrently with other netdev APIs, so there is no need to hold the rtnl_lock now. Therefore, this patch removes the rtnl_lock during the reset process and adjusts the position of HBG_NIC_STATE_RESETTING to ensure that multiple resets are not executed concurrently.

In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Create all dump files during debugfs initialization For the current debugfs of hisi_sas, after user triggers dump, the driver allocate memory space to save the register information and create debugfs files to display the saved information. In this process, the debugfs files created after each dump. Therefore, when the dump is triggered while the driver is unbind, the following hang occurs: [67840.853907] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [67840.862947] Mem abort info: [67840.865855] ESR = 0x0000000096000004 [67840.869713] EC = 0x25: DABT (current EL), IL = 32 bits [67840.875125] SET = 0, FnV = 0 [67840.878291] EA = 0, S1PTW = 0 [67840.881545] FSC = 0x04: level 0 translation fault [67840.886528] Data abort info: [67840.889524] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [67840.895117] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [67840.900284] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [67840.905709] user pgtable: 4k pages, 48-bit VAs, pgdp=0000002803a1f000 [67840.912263] [00000000000000a0] pgd=0000000000000000, p4d=0000000000000000 [67840.919177] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [67840.996435] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [67841.003628] pc : down_write+0x30/0x98 [67841.007546] lr : start_creating.part.0+0x60/0x198 [67841.012495] sp : ffff8000b979ba20 [67841.016046] x29: ffff8000b979ba20 x28: 0000000000000010 x27: 0000000000024b40 [67841.023412] x26: 0000000000000012 x25: ffff20202b355ae8 x24: ffff20202b35a8c8 [67841.030779] x23: ffffa36877928208 x22: ffffa368b4972240 x21: ffff8000b979bb18 [67841.038147] x20: ffff00281dc1e3c0 x19: fffffffffffffffe x18: 0000000000000020 [67841.045515] x17: 0000000000000000 x16: ffffa368b128a530 x15: ffffffffffffffff [67841.052888] x14: ffff8000b979bc18 x13: ffffffffffffffff x12: ffff8000b979bb18 [67841.060263] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa368b1289b18 [67841.067640] x8 : 0000000000000012 x7 : 0000000000000000 x6 : 00000000000003a9 [67841.075014] x5 : 0000000000000000 x4 : ffff002818c5cb00 x3 : 0000000000000001 [67841.082388] x2 : 0000000000000000 x1 : ffff002818c5cb00 x0 : 00000000000000a0 [67841.089759] Call trace: [67841.092456] down_write+0x30/0x98 [67841.096017] start_creating.part.0+0x60/0x198 [67841.100613] debugfs_create_dir+0x48/0x1f8 [67841.104950] debugfs_create_files_v3_hw+0x88/0x348 [hisi_sas_v3_hw] [67841.111447] debugfs_snapshot_regs_v3_hw+0x708/0x798 [hisi_sas_v3_hw] [67841.118111] debugfs_trigger_dump_v3_hw_write+0x9c/0x120 [hisi_sas_v3_hw] [67841.125115] full_proxy_write+0x68/0xc8 [67841.129175] vfs_write+0xd8/0x3f0 [67841.132708] ksys_write+0x70/0x108 [67841.136317] __arm64_sys_write+0x24/0x38 [67841.140440] invoke_syscall+0x50/0x128 [67841.144385] el0_svc_common.constprop.0+0xc8/0xf0 [67841.149273] do_el0_svc+0x24/0x38 [67841.152773] el0_svc+0x38/0xd8 [67841.156009] el0t_64_sync_handler+0xc0/0xc8 [67841.160361] el0t_64_sync+0x1a4/0x1a8 [67841.164189] Code: b9000882 d2800002 d2800023 f9800011 (c85ffc05) [67841.170443] ---[ end trace 0000000000000000 ]--- To fix this issue, create all directories and files during debugfs initialization. In this way, the driver only needs to allocate memory space to save information each time the user triggers dumping.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: reject duplicate device on updates A chain/flowtable update with duplicated devices in the same batch is possible. Unfortunately, netdev event path only removes the first device that is found, leaving unregistered the hook of the duplicated device. Check if a duplicated device exists in the transaction batch, bail out with EEXIST in such case. WARNING is hit when unregistering the hook: [49042.221275] WARNING: CPU: 4 PID: 8425 at net/netfilter/core.c:340 nf_hook_entry_head+0xaa/0x150 [49042.221375] CPU: 4 UID: 0 PID: 8425 Comm: nft Tainted: G S 6.16.0+ #170 PREEMPT(full) [...] [49042.221382] RIP: 0010:nf_hook_entry_head+0xaa/0x150

In the Linux kernel, the following vulnerability has been resolved: HID: hyperv: streamline driver probe to avoid devres issues It was found that unloading 'hid_hyperv' module results in a devres complaint: ... hv_vmbus: unregistering driver hid_hyperv ------------[ cut here ]------------ WARNING: CPU: 2 PID: 3983 at drivers/base/devres.c:691 devres_release_group+0x1f2/0x2c0 ... Call Trace: <TASK> ? devres_release_group+0x1f2/0x2c0 ? __warn+0xd1/0x1c0 ? devres_release_group+0x1f2/0x2c0 ? report_bug+0x32a/0x3c0 ? handle_bug+0x53/0xa0 ? exc_invalid_op+0x18/0x50 ? asm_exc_invalid_op+0x1a/0x20 ? devres_release_group+0x1f2/0x2c0 ? devres_release_group+0x90/0x2c0 ? rcu_is_watching+0x15/0xb0 ? __pfx_devres_release_group+0x10/0x10 hid_device_remove+0xf5/0x220 device_release_driver_internal+0x371/0x540 ? klist_put+0xf3/0x170 bus_remove_device+0x1f1/0x3f0 device_del+0x33f/0x8c0 ? __pfx_device_del+0x10/0x10 ? cleanup_srcu_struct+0x337/0x500 hid_destroy_device+0xc8/0x130 mousevsc_remove+0xd2/0x1d0 [hid_hyperv] device_release_driver_internal+0x371/0x540 driver_detach+0xc5/0x180 bus_remove_driver+0x11e/0x2a0 ? __mutex_unlock_slowpath+0x160/0x5e0 vmbus_driver_unregister+0x62/0x2b0 [hv_vmbus] ... And the issue seems to be that the corresponding devres group is not allocated. Normally, devres_open_group() is called from __hid_device_probe() but Hyper-V HID driver overrides 'hid_dev->driver' with 'mousevsc_hid_driver' stub and basically re-implements __hid_device_probe() by calling hid_parse() and hid_hw_start() but not devres_open_group(). hid_device_probe() does not call __hid_device_probe() for it. Later, when the driver is removed, hid_device_remove() calls devres_release_group() as it doesn't check whether hdev->driver was initially overridden or not. The issue seems to be related to the commit 62c68e7cee33 ("HID: ensure timely release of driver-allocated resources") but the commit itself seems to be correct. Fix the issue by dropping the 'hid_dev->driver' override and using hid_register_driver()/hid_unregister_driver() instead. Alternatively, it would have been possible to rely on the default handling but HID_CONNECT_DEFAULT implies HID_CONNECT_HIDRAW and it doesn't seem to work for mousevsc as-is.

In the Linux kernel, the following vulnerability has been resolved: mm/slab: fix warning caused by duplicate kmem_cache creation in kmem_buckets_create Commit b035f5a6d852 ("mm: slab: reduce the kmalloc() minimum alignment if DMA bouncing possible") reduced ARCH_KMALLOC_MINALIGN to 8 on arm64. However, with KASAN_HW_TAGS enabled, arch_slab_minalign() becomes 16. This causes kmalloc_caches[*][8] to be aliased to kmalloc_caches[*][16], resulting in kmem_buckets_create() attempting to create a kmem_cache for size 16 twice. This duplication triggers warnings on boot: [ 2.325108] ------------[ cut here ]------------ [ 2.325135] kmem_cache of name 'memdup_user-16' already exists [ 2.325783] WARNING: CPU: 0 PID: 1 at mm/slab_common.c:107 __kmem_cache_create_args+0xb8/0x3b0 [ 2.327957] Modules linked in: [ 2.328550] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc5mm-unstable-arm64+ #12 [ 2.328683] Hardware name: QEMU QEMU Virtual Machine, BIOS 2024.02-2 03/11/2024 [ 2.328790] pstate: 61000009 (nZCv daif -PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 2.328911] pc : __kmem_cache_create_args+0xb8/0x3b0 [ 2.328930] lr : __kmem_cache_create_args+0xb8/0x3b0 [ 2.328942] sp : ffff800083d6fc50 [ 2.328961] x29: ffff800083d6fc50 x28: f2ff0000c1674410 x27: ffff8000820b0598 [ 2.329061] x26: 000000007fffffff x25: 0000000000000010 x24: 0000000000002000 [ 2.329101] x23: ffff800083d6fce8 x22: ffff8000832222e8 x21: ffff800083222388 [ 2.329118] x20: f2ff0000c1674410 x19: f5ff0000c16364c0 x18: ffff800083d80030 [ 2.329135] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 2.329152] x14: 0000000000000000 x13: 0a73747369786520 x12: 79646165726c6120 [ 2.329169] x11: 656820747563205b x10: 2d2d2d2d2d2d2d2d x9 : 0000000000000000 [ 2.329194] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 [ 2.329210] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 2.329226] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 [ 2.329291] Call trace: [ 2.329407] __kmem_cache_create_args+0xb8/0x3b0 [ 2.329499] kmem_buckets_create+0xfc/0x320 [ 2.329526] init_user_buckets+0x34/0x78 [ 2.329540] do_one_initcall+0x64/0x3c8 [ 2.329550] kernel_init_freeable+0x26c/0x578 [ 2.329562] kernel_init+0x3c/0x258 [ 2.329574] ret_from_fork+0x10/0x20 [ 2.329698] ---[ end trace 0000000000000000 ]--- [ 2.403704] ------------[ cut here ]------------ [ 2.404716] kmem_cache of name 'msg_msg-16' already exists [ 2.404801] WARNING: CPU: 2 PID: 1 at mm/slab_common.c:107 __kmem_cache_create_args+0xb8/0x3b0 [ 2.404842] Modules linked in: [ 2.404971] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.12.0-rc5mm-unstable-arm64+ #12 [ 2.405026] Tainted: [W]=WARN [ 2.405043] Hardware name: QEMU QEMU Virtual Machine, BIOS 2024.02-2 03/11/2024 [ 2.405057] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.405079] pc : __kmem_cache_create_args+0xb8/0x3b0 [ 2.405100] lr : __kmem_cache_create_args+0xb8/0x3b0 [ 2.405111] sp : ffff800083d6fc50 [ 2.405115] x29: ffff800083d6fc50 x28: fbff0000c1674410 x27: ffff8000820b0598 [ 2.405135] x26: 000000000000ffd0 x25: 0000000000000010 x24: 0000000000006000 [ 2.405153] x23: ffff800083d6fce8 x22: ffff8000832222e8 x21: ffff800083222388 [ 2.405169] x20: fbff0000c1674410 x19: fdff0000c163d6c0 x18: ffff800083d80030 [ 2.405185] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 2.405201] x14: 0000000000000000 x13: 0a73747369786520 x12: 79646165726c6120 [ 2.405217] x11: 656820747563205b x10: 2d2d2d2d2d2d2d2d x9 : 0000000000000000 [ 2.405233] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 [ 2.405248] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 2.405271] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 [ 2.405287] Call trace: [ 2 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ASoC: core: Check for rtd == NULL in snd_soc_remove_pcm_runtime() snd_soc_remove_pcm_runtime() might be called with rtd == NULL which will leads to null pointer dereference. This was reproduced with topology loading and marking a link as ignore due to missing hardware component on the system. On module removal the soc_tplg_remove_link() would call snd_soc_remove_pcm_runtime() with rtd == NULL since the link was ignored, no runtime was created.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Check for hdwq null ptr when cleaning up lpfc_vport structure If a call to lpfc_sli4_read_rev() from lpfc_sli4_hba_setup() fails, the resultant cleanup routine lpfc_sli4_vport_delete_fcp_xri_aborted() may occur before sli4_hba.hdwqs are allocated. This may result in a null pointer dereference when attempting to take the abts_io_buf_list_lock for the first hardware queue. Fix by adding a null ptr check on phba->sli4_hba.hdwq and early return because this situation means there must have been an error during port initialization.

In the Linux kernel, the following vulnerability has been resolved: gve: prevent ethtool ops after shutdown A crash can occur if an ethtool operation is invoked after shutdown() is called. shutdown() is invoked during system shutdown to stop DMA operations without performing expensive deallocations. It is discouraged to unregister the netdev in this path, so the device may still be visible to userspace and kernel helpers. In gve, shutdown() tears down most internal data structures. If an ethtool operation is dispatched after shutdown(), it will dereference freed or NULL pointers, leading to a kernel panic. While graceful shutdown normally quiesces userspace before invoking the reboot syscall, forced shutdowns (as observed on GCP VMs) can still trigger this path. Fix by calling netif_device_detach() in shutdown(). This marks the device as detached so the ethtool ioctl handler will skip dispatching operations to the driver.

In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Initialize iscsi_conn->dd_data only if memory is allocated In case of an ib_fast_reg_mr allocation failure during iSER setup, the machine hits a panic because iscsi_conn->dd_data is initialized unconditionally, even when no memory is allocated (dd_size == 0). This leads invalid pointer dereference during connection teardown. Fix by setting iscsi_conn->dd_data only if memory is actually allocated. Panic trace: ------------ iser: iser_create_fastreg_desc: Failed to allocate ib_fast_reg_mr err=-12 iser: iser_alloc_rx_descriptors: failed allocating rx descriptors / data buffers BUG: unable to handle page fault for address: fffffffffffffff8 RIP: 0010:swake_up_locked.part.5+0xa/0x40 Call Trace: complete+0x31/0x40 iscsi_iser_conn_stop+0x88/0xb0 [ib_iser] iscsi_stop_conn+0x66/0xc0 [scsi_transport_iscsi] iscsi_if_stop_conn+0x14a/0x150 [scsi_transport_iscsi] iscsi_if_rx+0x1135/0x1834 [scsi_transport_iscsi] ? netlink_lookup+0x12f/0x1b0 ? netlink_deliver_tap+0x2c/0x200 netlink_unicast+0x1ab/0x280 netlink_sendmsg+0x257/0x4f0 ? _copy_from_user+0x29/0x60 sock_sendmsg+0x5f/0x70

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: fix refcount leak on table dump There is a reference count leak in ctnetlink_dump_table(): if (res < 0) { nf_conntrack_get(&ct->ct_general); // HERE cb->args[1] = (unsigned long)ct; ... While its very unlikely, its possible that ct == last. If this happens, then the refcount of ct was already incremented. This 2nd increment is never undone. This prevents the conntrack object from being released, which in turn keeps prevents cnet->count from dropping back to 0. This will then block the netns dismantle (or conntrack rmmod) as nf_conntrack_cleanup_net_list() will wait forever. This can be reproduced by running conntrack_resize.sh selftest in a loop. It takes ~20 minutes for me on a preemptible kernel on average before I see a runaway kworker spinning in nf_conntrack_cleanup_net_list. One fix would to change this to: if (res < 0) { if (ct != last) nf_conntrack_get(&ct->ct_general); But this reference counting isn't needed in the first place. We can just store a cookie value instead. A followup patch will do the same for ctnetlink_exp_dump_table, it looks to me as if this has the same problem and like ctnetlink_dump_table, we only need a 'skip hint', not the actual object so we can apply the same cookie strategy there as well.

In the Linux kernel, the following vulnerability has been resolved: gpio: graniterapids: Fix vGPIO driver crash Move setting irq_chip.name from probe() function to the initialization of "irq_chip" struct in order to fix vGPIO driver crash during bootup. Crash was caused by unauthorized modification of irq_chip.name field where irq_chip struct was initialized as const. This behavior is a consequence of suboptimal implementation of gpio_irq_chip_set_chip(), which should be changed to avoid casting away const qualifier. Crash log: BUG: unable to handle page fault for address: ffffffffc0ba81c0 /#PF: supervisor write access in kernel mode /#PF: error_code(0x0003) - permissions violation CPU: 33 UID: 0 PID: 1075 Comm: systemd-udevd Not tainted 6.12.0-rc6-00077-g2e1b3cc9d7f7 #1 Hardware name: Intel Corporation Kaseyville RP/Kaseyville RP, BIOS KVLDCRB1.PGS.0026.D73.2410081258 10/08/2024 RIP: 0010:gnr_gpio_probe+0x171/0x220 [gpio_graniterapids]

In the Linux kernel, the following vulnerability has been resolved: loop: Avoid updating block size under exclusive owner Syzbot came up with a reproducer where a loop device block size is changed underneath a mounted filesystem. This causes a mismatch between the block device block size and the block size stored in the superblock causing confusion in various places such as fs/buffer.c. The particular issue triggered by syzbot was a warning in __getblk_slow() due to requested buffer size not matching block device block size. Fix the problem by getting exclusive hold of the loop device to change its block size. This fails if somebody (such as filesystem) has already an exclusive ownership of the block device and thus prevents modifying the loop device under some exclusive owner which doesn't expect it.

In the Linux kernel, the following vulnerability has been resolved: netlink: avoid infinite retry looping in netlink_unicast() netlink_attachskb() checks for the socket's read memory allocation constraints. Firstly, it has: rmem < READ_ONCE(sk->sk_rcvbuf) to check if the just increased rmem value fits into the socket's receive buffer. If not, it proceeds and tries to wait for the memory under: rmem + skb->truesize > READ_ONCE(sk->sk_rcvbuf) The checks don't cover the case when skb->truesize + sk->sk_rmem_alloc is equal to sk->sk_rcvbuf. Thus the function neither successfully accepts these conditions, nor manages to reschedule the task - and is called in retry loop for indefinite time which is caught as: rcu: INFO: rcu_sched self-detected stall on CPU rcu: 0-....: (25999 ticks this GP) idle=ef2/1/0x4000000000000000 softirq=262269/262269 fqs=6212 (t=26000 jiffies g=230833 q=259957) NMI backtrace for cpu 0 CPU: 0 PID: 22 Comm: kauditd Not tainted 5.10.240 #68 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc42 04/01/2014 Call Trace: <IRQ> dump_stack lib/dump_stack.c:120 nmi_cpu_backtrace.cold lib/nmi_backtrace.c:105 nmi_trigger_cpumask_backtrace lib/nmi_backtrace.c:62 rcu_dump_cpu_stacks kernel/rcu/tree_stall.h:335 rcu_sched_clock_irq.cold kernel/rcu/tree.c:2590 update_process_times kernel/time/timer.c:1953 tick_sched_handle kernel/time/tick-sched.c:227 tick_sched_timer kernel/time/tick-sched.c:1399 __hrtimer_run_queues kernel/time/hrtimer.c:1652 hrtimer_interrupt kernel/time/hrtimer.c:1717 __sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1113 asm_call_irq_on_stack arch/x86/entry/entry_64.S:808 </IRQ> netlink_attachskb net/netlink/af_netlink.c:1234 netlink_unicast net/netlink/af_netlink.c:1349 kauditd_send_queue kernel/audit.c:776 kauditd_thread kernel/audit.c:897 kthread kernel/kthread.c:328 ret_from_fork arch/x86/entry/entry_64.S:304 Restore the original behavior of the check which commit in Fixes accidentally missed when restructuring the code. Found by Linux Verification Center (linuxtesting.org).

In the Linux kernel, the following vulnerability has been resolved: PCI: pnv_php: Clean up allocated IRQs on unplug When the root of a nested PCIe bridge configuration is unplugged, the pnv_php driver leaked the allocated IRQ resources for the child bridges' hotplug event notifications, resulting in a panic. Fix this by walking all child buses and deallocating all its IRQ resources before calling pci_hp_remove_devices(). Also modify the lifetime of the workqueue at struct pnv_php_slot::wq so that it is only destroyed in pnv_php_free_slot(), instead of pnv_php_disable_irq(). This is required since pnv_php_disable_irq() will now be called by workers triggered by hot unplug interrupts, so the workqueue needs to stay allocated. The abridged kernel panic that occurs without this patch is as follows: WARNING: CPU: 0 PID: 687 at kernel/irq/msi.c:292 msi_device_data_release+0x6c/0x9c CPU: 0 UID: 0 PID: 687 Comm: bash Not tainted 6.14.0-rc5+ #2 Call Trace: msi_device_data_release+0x34/0x9c (unreliable) release_nodes+0x64/0x13c devres_release_all+0xc0/0x140 device_del+0x2d4/0x46c pci_destroy_dev+0x5c/0x194 pci_hp_remove_devices+0x90/0x128 pci_hp_remove_devices+0x44/0x128 pnv_php_disable_slot+0x54/0xd4 power_write_file+0xf8/0x18c pci_slot_attr_store+0x40/0x5c sysfs_kf_write+0x64/0x78 kernfs_fop_write_iter+0x1b0/0x290 vfs_write+0x3bc/0x50c ksys_write+0x84/0x140 system_call_exception+0x124/0x230 system_call_vectored_common+0x15c/0x2ec [bhelgaas: tidy comments]

In the Linux kernel, the following vulnerability has been resolved: can: bcm: add missing rcu read protection for procfs content When the procfs content is generated for a bcm_op which is in the process to be removed the procfs output might show unreliable data (UAF). As the removal of bcm_op's is already implemented with rcu handling this patch adds the missing rcu_read_lock() and makes sure the list entries are properly removed under rcu protection.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: avoid NULL pointer dereference in skb_dequeue() A NULL pointer dereference can occur in skb_dequeue() when processing a QCA firmware crash dump on WCN7851 (0489:e0f3). [ 93.672166] Bluetooth: hci0: ACL memdump size(589824) [ 93.672475] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 93.672517] Workqueue: hci0 hci_devcd_rx [bluetooth] [ 93.672598] RIP: 0010:skb_dequeue+0x50/0x80 The issue stems from handle_dump_pkt_qca() returning 0 even when a dump packet is successfully processed. This is because it incorrectly forwards the return value of hci_devcd_init() (which returns 0 on success). As a result, the caller (btusb_recv_acl_qca() or btusb_recv_evt_qca()) assumes the packet was not handled and passes it to hci_recv_frame(), leading to premature kfree() of the skb. Later, hci_devcd_rx() attempts to dequeue the same skb from the dump queue, resulting in a NULL pointer dereference. Fix this by: 1. Making handle_dump_pkt_qca() return 0 on success and negative errno on failure, consistent with kernel conventions. 2. Splitting dump packet detection into separate functions for ACL and event packets for better structure and readability. This ensures dump packets are properly identified and consumed, avoiding double handling and preventing NULL pointer access.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: remove WARN on bad firmware input If the firmware gives bad input, that's nothing to do with the driver's stack at this point etc., so the WARN_ON() doesn't add any value. Additionally, this is one of the top syzbot reports now. Just print a message, and as an added bonus, print the sizes too.

In the Linux kernel, the following vulnerability has been resolved: block: fix resource leak in blk_register_queue() error path When registering a queue fails after blk_mq_sysfs_register() is successful but the function later encounters an error, we need to clean up the blk_mq_sysfs resources. Add the missing blk_mq_sysfs_unregister() call in the error path to properly clean up these resources and prevent a memory leak.

In the Linux kernel, the following vulnerability has been resolved: ice: add NULL check in eswitch lag check The function ice_lag_is_switchdev_running() is being called from outside of the LAG event handler code. This results in the lag->upper_netdev being NULL sometimes. To avoid a NULL-pointer dereference, there needs to be a check before it is dereferenced.

In the Linux kernel, the following vulnerability has been resolved: remoteproc: core: Clear table_sz when rproc_shutdown There is case as below could trigger kernel dump: Use U-Boot to start remote processor(rproc) with resource table published to a fixed address by rproc. After Kernel boots up, stop the rproc, load a new firmware which doesn't have resource table ,and start rproc. When starting rproc with a firmware not have resource table, `memcpy(loaded_table, rproc->cached_table, rproc->table_sz)` will trigger dump, because rproc->cache_table is set to NULL during the last stop operation, but rproc->table_sz is still valid. This issue is found on i.MX8MP and i.MX9. Dump as below: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000010af63000 [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Modules linked in: CPU: 2 UID: 0 PID: 1060 Comm: sh Not tainted 6.14.0-rc7-next-20250317-dirty #38 Hardware name: NXP i.MX8MPlus EVK board (DT) pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __pi_memcpy_generic+0x110/0x22c lr : rproc_start+0x88/0x1e0 Call trace: __pi_memcpy_generic+0x110/0x22c (P) rproc_boot+0x198/0x57c state_store+0x40/0x104 dev_attr_store+0x18/0x2c sysfs_kf_write+0x7c/0x94 kernfs_fop_write_iter+0x120/0x1cc vfs_write+0x240/0x378 ksys_write+0x70/0x108 __arm64_sys_write+0x1c/0x28 invoke_syscall+0x48/0x10c el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x30/0xcc el0t_64_sync_handler+0x10c/0x138 el0t_64_sync+0x198/0x19c Clear rproc->table_sz to address the issue.

In the Linux kernel, the following vulnerability has been resolved: nvmem: zynqmp_nvmem: unbreak driver after cleanup Commit 29be47fcd6a0 ("nvmem: zynqmp_nvmem: zynqmp_nvmem_probe cleanup") changed the driver to expect the device pointer to be passed as the "context", but in nvmem the context parameter comes from nvmem_config.priv which is never set - Leading to null pointer exceptions when the device is accessed.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check for head_pipe in dcn201_acquire_free_pipe_for_layer This commit addresses a potential null pointer dereference issue in the `dcn201_acquire_free_pipe_for_layer` function. The issue could occur when `head_pipe` is null. The fix adds a check to ensure `head_pipe` is not null before asserting it. If `head_pipe` is null, the function returns NULL to prevent a potential null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn201/dcn201_resource.c:1016 dcn201_acquire_free_pipe_for_layer() error: we previously assumed 'head_pipe' could be null (see line 1010)

In the Linux kernel, the following vulnerability has been resolved: HID: bpf: abort dispatch if device destroyed The current HID bpf implementation assumes no output report/request will go through it after hid_bpf_destroy_device() has been called. This leads to a bug that unplugging certain types of HID devices causes a cleaned- up SRCU to be accessed. The bug was previously a hidden failure until a recent x86 percpu change [1] made it access not-present pages. The bug will be triggered if the conditions below are met: A) a device under the driver has some LEDs on B) hid_ll_driver->request() is uninplemented (e.g., logitech-djreceiver) If condition A is met, hidinput_led_worker() is always scheduled *after* hid_bpf_destroy_device(). hid_destroy_device ` hid_bpf_destroy_device ` cleanup_srcu_struct(&hdev->bpf.srcu) ` hid_remove_device ` ... ` led_classdev_unregister ` led_trigger_set(led_cdev, NULL) ` led_set_brightness(led_cdev, LED_OFF) ` ... ` input_inject_event ` input_event_dispose ` hidinput_input_event ` schedule_work(&hid->led_work) [hidinput_led_worker] This is fine when condition B is not met, where hidinput_led_worker() calls hid_ll_driver->request(). This is the case for most HID drivers, which implement it or use the generic one from usbhid. The driver itself or an underlying driver will then abort processing the request. Otherwise, hidinput_led_worker() tries hid_hw_output_report() and leads to the bug. hidinput_led_worker ` hid_hw_output_report ` dispatch_hid_bpf_output_report ` srcu_read_lock(&hdev->bpf.srcu) ` srcu_read_unlock(&hdev->bpf.srcu, idx) The bug has existed since the introduction [2] of dispatch_hid_bpf_output_report(). However, the same bug also exists in dispatch_hid_bpf_raw_requests(), and I've reproduced (no visible effect because of the lack of [1], but confirmed bpf.destroyed == 1) the bug against the commit (i.e., the Fixes:) introducing the function. This is because hidinput_led_worker() falls back to hid_hw_raw_request() when hid_ll_driver->output_report() is uninplemented (e.g., logitech- djreceiver). hidinput_led_worker ` hid_hw_output_report: -ENOSYS ` hid_hw_raw_request ` dispatch_hid_bpf_raw_requests ` srcu_read_lock(&hdev->bpf.srcu) ` srcu_read_unlock(&hdev->bpf.srcu, idx) Fix the issue by returning early in the two mentioned functions if hid_bpf has been marked as destroyed. Though dispatch_hid_bpf_device_event() handles input events, and there is no evidence that it may be called after the destruction, the same check, as a safety net, is also added to it to maintain the consistency among all dispatch functions. The impact of the bug on other architectures is unclear. Even if it acts as a hidden failure, this is still dangerous because it corrupts whatever is on the address calculated by SRCU. Thus, CC'ing the stable list. [1]: commit 9d7de2aa8b41 ("x86/percpu/64: Use relative percpu offsets") [2]: commit 9286675a2aed ("HID: bpf: add HID-BPF hooks for hid_hw_output_report")

In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix kernel NULL pointer dereference when replacing free hugetlb folios A kernel crash was observed when replacing free hugetlb folios: BUG: kernel NULL pointer dereference, address: 0000000000000028 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 28 UID: 0 PID: 29639 Comm: test_cma.sh Tainted 6.15.0-rc6-zp #41 PREEMPT(voluntary) RIP: 0010:alloc_and_dissolve_hugetlb_folio+0x1d/0x1f0 RSP: 0018:ffffc9000b30fa90 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000342cca RCX: ffffea0043000000 RDX: ffffc9000b30fb08 RSI: ffffea0043000000 RDI: 0000000000000000 RBP: ffffc9000b30fb20 R08: 0000000000001000 R09: 0000000000000000 R10: ffff88886f92eb00 R11: 0000000000000000 R12: ffffea0043000000 R13: 0000000000000000 R14: 00000000010c0200 R15: 0000000000000004 FS: 00007fcda5f14740(0000) GS:ffff8888ec1d8000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000028 CR3: 0000000391402000 CR4: 0000000000350ef0 Call Trace: <TASK> replace_free_hugepage_folios+0xb6/0x100 alloc_contig_range_noprof+0x18a/0x590 ? srso_return_thunk+0x5/0x5f ? down_read+0x12/0xa0 ? srso_return_thunk+0x5/0x5f cma_range_alloc.constprop.0+0x131/0x290 __cma_alloc+0xcf/0x2c0 cma_alloc_write+0x43/0xb0 simple_attr_write_xsigned.constprop.0.isra.0+0xb2/0x110 debugfs_attr_write+0x46/0x70 full_proxy_write+0x62/0xa0 vfs_write+0xf8/0x420 ? srso_return_thunk+0x5/0x5f ? filp_flush+0x86/0xa0 ? srso_return_thunk+0x5/0x5f ? filp_close+0x1f/0x30 ? srso_return_thunk+0x5/0x5f ? do_dup2+0xaf/0x160 ? srso_return_thunk+0x5/0x5f ksys_write+0x65/0xe0 do_syscall_64+0x64/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e There is a potential race between __update_and_free_hugetlb_folio() and replace_free_hugepage_folios(): CPU1 CPU2 __update_and_free_hugetlb_folio replace_free_hugepage_folios folio_test_hugetlb(folio) -- It's still hugetlb folio. __folio_clear_hugetlb(folio) hugetlb_free_folio(folio) h = folio_hstate(folio) -- Here, h is NULL pointer When the above race condition occurs, folio_hstate(folio) returns NULL, and subsequent access to this NULL pointer will cause the system to crash. To resolve this issue, execute folio_hstate(folio) under the protection of the hugetlb_lock lock, ensuring that folio_hstate(folio) does not return NULL.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell_rbu: Fix list usage Pass the correct list head to list_for_each_entry*() when looping through the packet list. Without this patch, reading the packet data via sysfs will show the data incorrectly (because it starts at the wrong packet), and clearing the packet list will result in a NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_set_pipapo_avx2: fix initial map fill If the first field doesn't cover the entire start map, then we must zero out the remainder, else we leak those bits into the next match round map. The early fix was incomplete and did only fix up the generic C implementation. A followup patch adds a test case to nft_concat_range.sh.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reject VHT opmode for unsupported channel widths VHT operating mode notifications are not defined for channel widths below 20 MHz. In particular, 5 MHz and 10 MHz are not valid under the VHT specification and must be rejected. Without this check, malformed notifications using these widths may reach ieee80211_chan_width_to_rx_bw(), leading to a WARN_ON due to invalid input. This issue was reported by syzbot. Reject these unsupported widths early in sta_link_apply_parameters() when opmode_notif is used. The accepted set includes 20, 40, 80, 160, and 80+80 MHz, which are valid for VHT. While 320 MHz is not defined for VHT, it is allowed to avoid rejecting HE or EHT clients that may still send a VHT opmode notification.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reject TDLS operations when station is not associated syzbot triggered a WARN in ieee80211_tdls_oper() by sending NL80211_TDLS_ENABLE_LINK immediately after NL80211_CMD_CONNECT, before association completed and without prior TDLS setup. This left internal state like sdata->u.mgd.tdls_peer uninitialized, leading to a WARN_ON() in code paths that assumed it was valid. Reject the operation early if not in station mode or not associated.

In the Linux kernel, the following vulnerability has been resolved: net_sched: skbprio: Remove overly strict queue assertions In the current implementation, skbprio enqueue/dequeue contains an assertion that fails under certain conditions when SKBPRIO is used as a child qdisc under TBF with specific parameters. The failure occurs because TBF sometimes peeks at packets in the child qdisc without actually dequeuing them when tokens are unavailable. This peek operation creates a discrepancy between the parent and child qdisc queue length counters. When TBF later receives a high-priority packet, SKBPRIO's queue length may show a different value than what's reflected in its internal priority queue tracking, triggering the assertion. The fix removes this overly strict assertions in SKBPRIO, they are not necessary at all.

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible infinite loop in fib6_info_uses_dev() fib6_info_uses_dev() seems to rely on RCU without an explicit protection. Like the prior fix in rt6_nlmsg_size(), we need to make sure fib6_del_route() or fib6_add_rt2node() have not removed the anchor from the list, or we risk an infinite loop.

In the Linux kernel, the following vulnerability has been resolved: net_sched: Flush gso_skb list too during ->change() Previously, when reducing a qdisc's limit via the ->change() operation, only the main skb queue was trimmed, potentially leaving packets in the gso_skb list. This could result in NULL pointer dereference when we only check sch->limit against sch->q.qlen. This patch introduces a new helper, qdisc_dequeue_internal(), which ensures both the gso_skb list and the main queue are properly flushed when trimming excess packets. All relevant qdiscs (codel, fq, fq_codel, fq_pie, hhf, pie) are updated to use this helper in their ->change() routines.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-sysman: Fix WMI data block retrieval in sysfs callbacks After retrieving WMI data blocks in sysfs callbacks, check for the validity of them before dereferencing their content.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Use TOE/TSO on all TCP It is desireable to push the hardware accelerator to also process non-segmented TCP frames: we pass the skb->len to the "TOE/TSO" offloader and it will handle them. Without this quirk the driver becomes unstable and lock up and and crash. I do not know exactly why, but it is probably due to the TOE (TCP offload engine) feature that is coupled with the segmentation feature - it is not possible to turn one part off and not the other, either both TOE and TSO are active, or neither of them. Not having the TOE part active seems detrimental, as if that hardware feature is not really supposed to be turned off. The datasheet says: "Based on packet parsing and TCP connection/NAT table lookup results, the NetEngine puts the packets belonging to the same TCP connection to the same queue for the software to process. The NetEngine puts incoming packets to the buffer or series of buffers for a jumbo packet. With this hardware acceleration, IP/TCP header parsing, checksum validation and connection lookup are offloaded from the software processing." After numerous tests with the hardware locking up after something between minutes and hours depending on load using iperf3 I have concluded this is necessary to stabilize the hardware.

In the Linux kernel, the following vulnerability has been resolved: atm: Revert atm_account_tx() if copy_from_iter_full() fails. In vcc_sendmsg(), we account skb->truesize to sk->sk_wmem_alloc by atm_account_tx(). It is expected to be reverted by atm_pop_raw() later called by vcc->dev->ops->send(vcc, skb). However, vcc_sendmsg() misses the same revert when copy_from_iter_full() fails, and then we will leak a socket. Let's factorise the revert part as atm_return_tx() and call it in the failure path. Note that the corresponding sk_wmem_alloc operation can be found in alloc_tx() as of the blamed commit. $ git blame -L:alloc_tx net/atm/common.c c55fa3cccbc2c~

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on sit_bitmap_size w/ below testcase, resize will generate a corrupted image which contains inconsistent metadata, so when mounting such image, it will trigger kernel panic: touch img truncate -s $((512*1024*1024*1024)) img mkfs.f2fs -f img $((256*1024*1024)) resize.f2fs -s -i img -t $((1024*1024*1024)) mount img /mnt/f2fs ------------[ cut here ]------------ kernel BUG at fs/f2fs/segment.h:863! Oops: invalid opcode: 0000 [#1] SMP PTI CPU: 11 UID: 0 PID: 3922 Comm: mount Not tainted 6.15.0-rc1+ #191 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:f2fs_ra_meta_pages+0x47c/0x490 Call Trace: f2fs_build_segment_manager+0x11c3/0x2600 f2fs_fill_super+0xe97/0x2840 mount_bdev+0xf4/0x140 legacy_get_tree+0x2b/0x50 vfs_get_tree+0x29/0xd0 path_mount+0x487/0xaf0 __x64_sys_mount+0x116/0x150 do_syscall_64+0x82/0x190 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fdbfde1bcfe The reaseon is: sit_i->bitmap_size is 192, so size of sit bitmap is 192*8=1536, at maximum there are 1536 sit blocks, however MAIN_SEGS is 261893, so that sit_blk_cnt is 4762, build_sit_entries() -> current_sit_addr() tries to access out-of-boundary in sit_bitmap at offset from [1536, 4762), once sit_bitmap and sit_bitmap_mirror is not the same, it will trigger f2fs_bug_on(). Let's add sanity check in f2fs_sanity_check_ckpt() to avoid panic.

In the Linux kernel, the following vulnerability has been resolved: drm/sti: avoid potential dereference of error pointers in sti_gdp_atomic_check The return value of drm_atomic_get_crtc_state() needs to be checked. To avoid use of error pointer 'crtc_state' in case of the failure.

In the Linux kernel, the following vulnerability has been resolved: clk: spacemit: mark K1 pll1_d8 as critical The pll1_d8 clock is enabled by the boot loader, and is ultimately a parent for numerous clocks, including those used by APB and AXI buses. Guodong Xu discovered that this clock got disabled while responding to getting -EPROBE_DEFER when requesting a reset controller. The needed clock (CLK_DMA, along with its parents) had already been enabled. To respond to the probe deferral return, the CLK_DMA clock was disabled, and this led to parent clocks also reducing their enable count. When the enable count for pll1_d8 was decremented it became 0, which caused it to be disabled. This led to a system hang. Marking that clock critical resolves this by preventing it from being disabled. Define a new macro CCU_FACTOR_GATE_DEFINE() to allow clock flags to be supplied for a CCU_FACTOR_GATE clock.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda: Use devm_kstrdup() to avoid memleak. sof_pdata->tplg_filename can have address allocated by kstrdup() and can be overwritten. Memory leak was detected with kmemleak: unreferenced object 0xffff88812391ff60 (size 16): comm "kworker/4:1", pid 161, jiffies 4294802931 hex dump (first 16 bytes): 73 6f 66 2d 68 64 61 2d 67 65 6e 65 72 69 63 00 sof-hda-generic. backtrace (crc 4bf1675c): __kmalloc_node_track_caller_noprof+0x49c/0x6b0 kstrdup+0x46/0xc0 hda_machine_select.cold+0x1de/0x12cf [snd_sof_intel_hda_generic] sof_init_environment+0x16f/0xb50 [snd_sof] sof_probe_continue+0x45/0x7c0 [snd_sof] sof_probe_work+0x1e/0x40 [snd_sof] process_one_work+0x894/0x14b0 worker_thread+0x5e5/0xfb0 kthread+0x39d/0x760 ret_from_fork+0x31/0x70 ret_from_fork_asm+0x1a/0x30

In the Linux kernel, the following vulnerability has been resolved: ksmbd: limit repeated connections from clients with the same IP Repeated connections from clients with the same IP address may exhaust the max connections and prevent other normal client connections. This patch limit repeated connections from clients with the same IP.

In the Linux kernel, the following vulnerability has been resolved: netlink: Fix wraparounds of sk->sk_rmem_alloc. Netlink has this pattern in some places if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf) atomic_add(skb->truesize, &sk->sk_rmem_alloc); , which has the same problem fixed by commit 5a465a0da13e ("udp: Fix multiple wraparounds of sk->sk_rmem_alloc."). For example, if we set INT_MAX to SO_RCVBUFFORCE, the condition is always false as the two operands are of int. Then, a single socket can eat as many skb as possible until OOM happens, and we can see multiple wraparounds of sk->sk_rmem_alloc. Let's fix it by using atomic_add_return() and comparing the two variables as unsigned int. Before: [root@fedora ~]# ss -f netlink Recv-Q Send-Q Local Address:Port Peer Address:Port -1668710080 0 rtnl:nl_wraparound/293 * After: [root@fedora ~]# ss -f netlink Recv-Q Send-Q Local Address:Port Peer Address:Port 2147483072 0 rtnl:nl_wraparound/290 * ^ `--- INT_MAX - 576

In the Linux kernel, the following vulnerability has been resolved: mm/gup: handle NULL pages in unpin_user_pages() The recent addition of "pofs" (pages or folios) handling to gup has a flaw: it assumes that unpin_user_pages() handles NULL pages in the pages** array. That's not the case, as I discovered when I ran on a new configuration on my test machine. Fix this by skipping NULL pages in unpin_user_pages(), just like unpin_folios() already does. Details: when booting on x86 with "numa=fake=2 movablecore=4G" on Linux 6.12, and running this: tools/testing/selftests/mm/gup_longterm ...I get the following crash: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:sanity_check_pinned_pages+0x3a/0x2d0 ... Call Trace: <TASK> ? __die_body+0x66/0xb0 ? page_fault_oops+0x30c/0x3b0 ? do_user_addr_fault+0x6c3/0x720 ? irqentry_enter+0x34/0x60 ? exc_page_fault+0x68/0x100 ? asm_exc_page_fault+0x22/0x30 ? sanity_check_pinned_pages+0x3a/0x2d0 unpin_user_pages+0x24/0xe0 check_and_migrate_movable_pages_or_folios+0x455/0x4b0 __gup_longterm_locked+0x3bf/0x820 ? mmap_read_lock_killable+0x12/0x50 ? __pfx_mmap_read_lock_killable+0x10/0x10 pin_user_pages+0x66/0xa0 gup_test_ioctl+0x358/0xb20 __se_sys_ioctl+0x6b/0xc0 do_syscall_64+0x7b/0x150 entry_SYSCALL_64_after_hwframe+0x76/0x7e

In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: account for Ethernet header in nf_flow_pppoe_proto() syzbot found a potential access to uninit-value in nf_flow_pppoe_proto() Blamed commit forgot the Ethernet header. BUG: KMSAN: uninit-value in nf_flow_offload_inet_hook+0x7e4/0x940 net/netfilter/nf_flow_table_inet.c:27 nf_flow_offload_inet_hook+0x7e4/0x940 net/netfilter/nf_flow_table_inet.c:27 nf_hook_entry_hookfn include/linux/netfilter.h:157 [inline] nf_hook_slow+0xe1/0x3d0 net/netfilter/core.c:623 nf_hook_ingress include/linux/netfilter_netdev.h:34 [inline] nf_ingress net/core/dev.c:5742 [inline] __netif_receive_skb_core+0x4aff/0x70c0 net/core/dev.c:5837 __netif_receive_skb_one_core net/core/dev.c:5975 [inline] __netif_receive_skb+0xcc/0xac0 net/core/dev.c:6090 netif_receive_skb_internal net/core/dev.c:6176 [inline] netif_receive_skb+0x57/0x630 net/core/dev.c:6235 tun_rx_batched+0x1df/0x980 drivers/net/tun.c:1485 tun_get_user+0x4ee0/0x6b40 drivers/net/tun.c:1938 tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1984 new_sync_write fs/read_write.c:593 [inline] vfs_write+0xb4b/0x1580 fs/read_write.c:686 ksys_write fs/read_write.c:738 [inline] __do_sys_write fs/read_write.c:749 [inline]

In the Linux kernel, the following vulnerability has been resolved: clk: davinci: Add NULL check in davinci_lpsc_clk_register() devm_kasprintf() returns NULL when memory allocation fails. Currently, davinci_lpsc_clk_register() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue and ensuring no resources are left allocated.

In the Linux kernel, the following vulnerability has been resolved: fbdev: Fix do_register_framebuffer to prevent null-ptr-deref in fb_videomode_to_var If fb_add_videomode() in do_register_framebuffer() fails to allocate memory for fb_videomode, it will later lead to a null-ptr dereference in fb_videomode_to_var(), as the fb_info is registered while not having the mode in modelist that is expected to be there, i.e. the one that is described in fb_info->var. ================================================================ general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 30371 Comm: syz-executor.1 Not tainted 5.10.226-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:fb_videomode_to_var+0x24/0x610 drivers/video/fbdev/core/modedb.c:901 Call Trace: display_to_var+0x3a/0x7c0 drivers/video/fbdev/core/fbcon.c:929 fbcon_resize+0x3e2/0x8f0 drivers/video/fbdev/core/fbcon.c:2071 resize_screen drivers/tty/vt/vt.c:1176 [inline] vc_do_resize+0x53a/0x1170 drivers/tty/vt/vt.c:1263 fbcon_modechanged+0x3ac/0x6e0 drivers/video/fbdev/core/fbcon.c:2720 fbcon_update_vcs+0x43/0x60 drivers/video/fbdev/core/fbcon.c:2776 do_fb_ioctl+0x6d2/0x740 drivers/video/fbdev/core/fbmem.c:1128 fb_ioctl+0xe7/0x150 drivers/video/fbdev/core/fbmem.c:1203 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:739 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x67/0xd1 ================================================================ Even though fbcon_init() checks beforehand if fb_match_mode() in var_to_display() fails, it can not prevent the panic because fbcon_init() does not return error code. Considering this and the comment in the code about fb_match_mode() returning NULL - "This should not happen" - it is better to prevent registering the fb_info if its mode was not set successfully. Also move fb_add_videomode() closer to the beginning of do_register_framebuffer() to avoid having to do the cleanup on fail. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: prevent rename with empty string Client can send empty newname string to ksmbd server. It will cause a kernel oops from d_alloc. This patch return the error when attempting to rename a file or directory with an empty new name string.

In the Linux kernel, the following vulnerability has been resolved: bpf: Reject %p% format string in bprintf-like helpers static const char fmt[] = "%p%"; bpf_trace_printk(fmt, sizeof(fmt)); The above BPF program isn't rejected and causes a kernel warning at runtime: Please remove unsupported %\x00 in format string WARNING: CPU: 1 PID: 7244 at lib/vsprintf.c:2680 format_decode+0x49c/0x5d0 This happens because bpf_bprintf_prepare skips over the second %, detected as punctuation, while processing %p. This patch fixes it by not skipping over punctuation. %\x00 is then processed in the next iteration and rejected.