RIOT-OS, an operating system that supports Internet of Things devices, contains a network stack with the ability to process 6LoWPAN frames. An attacker can send a crafted frame to the device resulting in a large out of bounds write beyond the packet buffer. The write will create a hard fault exception after reaching the last page of RAM. The hard fault is not handled and the system will be stuck until reset. Thus the impact is denial of service. Version 2022.10 fixes this issue. As a workaround, apply the patch manually.

RIOT-OS, an operating system for Internet of Things (IoT) devices, contains a network stack with the ability to process 6LoWPAN frames. Prior to version 2023.04, an attacker can send a crafted frame to the device resulting in an integer underflow and out of bounds access in the packet buffer. Triggering the access at the right time will corrupt other packets or the allocator metadata. Corrupting a pointer will lead to denial of service. This issue is fixed in version 2023.04. As a workaround, disable SRH in the network stack.

RIOT is an open-source microcontroller operating system, designed to match the requirements of Internet of Things (IoT) devices and other embedded devices. A vulnerability was discovered in the IPv6 fragmentation reassembly implementation of RIOT OS v2025.07. When receiving an fragmented IPv6 packet with fragment offset 0 and an empty payload, the payload pointer is set to NULL. However, the implementation still tries to copy the payload into the reassembly buffer, resulting in a NULL pointer dereference which crashes the OS (DoS). To trigger the vulnerability, the `gnrc_ipv6_ext_frag` module must be enabled and the attacker must be able to send arbitrary IPv6 packets to the victim. RIOT OS v2025.10 fixes the issue.

RIOT 2019.07 contains a NULL pointer dereference in the MQTT-SN implementation (asymcute), potentially allowing an attacker to crash a network node running RIOT. This requires spoofing an MQTT server response. To do so, the attacker needs to know the MQTT MsgID of a pending MQTT protocol message and the ephemeral port used by RIOT's MQTT implementation. Additionally, the server IP address is required for spoofing the packet.

In the TCP implementation (gnrc_tcp) in RIOT through 2019.07, the parser for TCP options does not terminate on all inputs, allowing a denial-of-service, because sys/net/gnrc/transport_layer/tcp/gnrc_tcp_option.c has an infinite loop for an unknown zero-length option.

RIOT-OS, an operating system for Internet of Things (IoT) devices, contains a network stack with the ability to process 6LoWPAN frames. Prior to version 2023.04, an attacker can send a crafted frame to the device to trigger a NULL pointer dereference leading to denial of service. This issue is fixed in version 2023.04. There are no known workarounds.

RIOT-OS, an operating system for Internet of Things (IoT) devices, contains a network stack with the ability to process 6LoWPAN frames. Prior to version 2023.04, an attacker can send crafted frames to the device to trigger the usage of an uninitialized object leading to denial of service. This issue is fixed in version 2023.04. As a workaround, disable fragment forwarding or SFR.

RIOT is an open-source microcontroller operating system, designed to match the requirements of Internet of Things (IoT) devices and other embedded devices. A malicious actor can send a IEEE 802.15.4 packet with spoofed length byte and optionally spoofed FCS, which eventually results into an endless loop on a CC2538 as receiver. Before PR #20998, the receiver would check for the location of the CRC bit using the packet length byte by considering all 8 bits, instead of discarding bit 7, which is what the radio does. This then results into reading outside of the RX FIFO. Although it prints an error when attempting to read outside of the RX FIFO, it will continue doing this. This may lead to a discrepancy in the CRC check according to the firmware and the radio. If the CPU judges the CRC as correct and the radio is set to `AUTO_ACK`, when the packet requests and acknowledgment the CPU will go into the state `CC2538_STATE_TX_ACK`. However, if the radio judged the CRC as incorrect, it will not send an acknowledgment, and thus the `TXACKDONE` event will not fire. It will then never return to the state `CC2538_STATE_READY` since the baseband processing is still disabled. Then the CPU will be in an endless loop. Since setting to idle is not forced, it won't do it if the radio's state is not `CC2538_STATE_READY`. A fix has not yet been made.

RIOT is an operating system for internet of things (IoT) devices. In version 2024.04 and prior, the function `_parse_advertise`, located in `/sys/net/application_layer/dhcpv6/client.c`, has no minimum header length check for `dhcpv6_opt_t` after processing `dhcpv6_msg_t`. This omission could lead to an out-of-bound read, causing system inconsistency. Additionally, the same lack of a header length check is present in the function `_preparse_advertise`, which is called by `_parse_advertise` before handling the request. As of time of publication, no known patched version exists.

RIOT-OS, an operating system for Internet of Things (IoT) devices, contains a network stack with the ability to process 6LoWPAN frames. In versions 2023.01 and prior, an attacker can send multiple crafted frames to the device to trigger a race condition. The race condition invalidates assumptions about the program state and leads to an invalid memory access resulting in denial of service. This issue is patched in pull request 19679. There are no known workarounds.

RIOT-OS, an operating system for Internet of Things (IoT) devices, contains a network stack with the ability to process 6LoWPAN frames. In versions 2023.01 and prior, an attacker can send a crafted frame which is forwarded by the device. During encoding of the packet a NULL pointer dereference occurs. This crashes the device leading to denial of service. A patch is available at pull request 19678. There are no known workarounds.

RIOT-OS, an operating system that supports Internet of Things devices, contains a network stack with the ability to process 6LoWPAN frames. Prior to version 2022.10, an attacker can send a crafted frame to the device resulting in a NULL pointer dereference. During forwarding of a fragment an uninitialized entry in the reassembly buffer is used. The NULL pointer dereference triggers a hard fault exception resulting in denial of service. Version 2022.10 fixes this issue. As a workaround, disable support for fragmented IP datagrams or apply the patches manually.

RIOT-OS, an operating system that supports Internet of Things devices, contains a network stack with the ability to process 6LoWPAN frames. Prior to version 2022.10, an attacker can send a crafted frame to the device resulting in a NULL pointer dereference while encoding a 6LoWPAN IPHC header. The NULL pointer dereference causes a hard fault exception, leading to denial of service. Version 2022.10 fixes this issue. As a workaround, apply the patches manually.

In RIOT 2019.07, the MQTT-SN implementation (asymcute) mishandles errors occurring during a read operation on a UDP socket. The receive loop ends. This allows an attacker (via a large packet) to prevent a RIOT MQTT-SN client from working until the device is restarted.

RIOT RIOT-OS version after commit 7af03ab624db0412c727eed9ab7630a5282e2fd3 contains a Buffer Overflow vulnerability in sock_dns, an implementation of the DNS protocol utilizing the RIOT sock API that can result in Remote code executing. This attack appears to be exploitable via network connectivity.

RIOT is an open-source microcontroller operating system, designed to match the requirements of Internet of Things (IoT) devices and other embedded devices. In 2026.01 and earlier, the default handler for the well_known_core resource coap_well_known_core_default_handler writes user-provided option data and other data into a fixed size buffer without validating the buffer is large enough to contain the response. This vulnerability allows an attacker to corrupt neighboring stack location, including security-sensitive addresses like the return address, leading to denial of service or arbitrary code execution.

RIOT-OS, an operating system for Internet of Things (IoT) devices, contains a network stack with the ability to process 6LoWPAN frames. In version 2023.01 and prior, an attacker can send a crafted frame to the device resulting in an out of bounds write in the packet buffer. The overflow can be used to corrupt other packets and the allocator metadata. Corrupting a pointer will easily lead to denial of service. While carefully manipulating the allocator metadata gives an attacker the possibility to write data to arbitrary locations and thus execute arbitrary code. This issue is fixed in pull request 19680. As a workaround, disable support for fragmented IP datagrams.

RIOT-OS, an operating system that supports Internet of Things devices, contains a network stack with the ability to process 6LoWPAN frames. Prior to version 2022.10, an attacker can send a crafted frame to the device resulting in an out of bounds write in the packet buffer. The overflow can be used to corrupt other packets and the allocator metadata. Corrupting a pointer will easily lead to denial of service. While carefully manipulating the allocator metadata gives an attacker the possibility to write data to arbitrary locations and thus execute arbitrary code. Version 2022.10 fixes this issue. As a workaround, disable support for fragmented IP datagrams or apply the patches manually.

RIOT-OS, an operating system that supports Internet of Things devices, contains a network stack with the ability to process 6LoWPAN frames. Prior to version 2022.10, an attacker can send a crafted frame to the device resulting in a type confusion between IPv6 extension headers and a UDP header. This occurs while encoding a 6LoWPAN IPHC header. The type confusion manifests in an out of bounds write in the packet buffer. The overflow can be used to corrupt other packets and the allocator metadata. Corrupting a pointer will easily lead to denial of service. While carefully manipulating the allocator metadata gives an attacker the possibility to write data to arbitrary locations and thus execute arbitrary code. Version 2022.10 fixes this issue. As a workaround, apply the patches manually.

NaviServer 4.99.4 to 4.99.19 allows denial of service due to the nsd/driver.c ChunkedDecode function not properly validating the length of a chunk. A remote attacker can craft a chunked-transfer request that will result in a negative value being passed to memmove via the size parameter, causing the process to crash.

GraphicsMagick through 1.3.35 has a heap-based buffer overflow in ReadMNGImage in coders/png.c.

Stack-based buffer overflow vulnerability in the SonicOS HTTP server allows an authenticated remote attacker to cause Denial of Service (DoS) via sscanf function.

bit2spr 1992-06-07 has a stack-based buffer overflow (129-byte write) in conv_bitmap in bit2spr.c via a long line in a bitmap file.

eprosima Fast DDS is a C++ implementation of the Data Distribution Service standard of the Object Management Group. Prior to versions 2.14.0, 2.13.4, 2.12.3, 2.10.4, and 2.6.8, manipulated DATA Submessage can cause a heap overflow error in the Fast-DDS process, causing the process to be terminated remotely. Additionally, the payload_size in the DATA Submessage packet is declared as uint32_t. When a negative number, such as -1, is input into this variable, it results in an Integer Overflow (for example, -1 gets converted to 0xFFFFFFFF). This eventually leads to a heap-buffer-overflow, causing the program to terminate. Versions 2.14.0, 2.13.4, 2.12.3, 2.10.4, and 2.6.8 contain a fix for this issue.

A stack overflow vulnerability exists in /goform/WifiMacFilterGet in Tenda W6 V1.0.0.9(4122) version, which can be exploited by attackers to cause a denial of service (DoS) via the index parameter.

A vulnerability has been identified in EN100 Ethernet module DNP3 IP variant (All versions), EN100 Ethernet module IEC 104 variant (All versions), EN100 Ethernet module IEC 61850 variant (All versions < V4.37), EN100 Ethernet module Modbus TCP variant (All versions), EN100 Ethernet module PROFINET IO variant (All versions). Affected applications contains a memory corruption vulnerability while parsing specially crafted HTTP packets to /txtrace endpoint. This could allow an attacker to crash the affected application leading to a denial of service condition.

A stack overflow in the Edit_BasicSSID_5G function of H3C Magic B1STV100R012 allows attackers to cause a Denial of Service (DoS) via a crafted POST request.

Out-of-bounds Write vulnerability exists in Modicon M218 Logic Controller (V5.0.0.7 and prior) which could cause Denial of Service when sending specific crafted IPV4 packet to the controller: Sending a specific IPv4 protocol package to Schneider Electric Modicon M218 Logic Controller can cause IPv4 devices to go down. The device does not work properly and must be powered back on to return to normal.

An issue was discovered in Contiki-NG through 4.3 and Contiki through 3.0. A buffer overflow is present due to an integer underflow during 6LoWPAN fragment processing in the face of truncated fragments in os/net/ipv6/sicslowpan.c. This results in accesses of unmapped memory, crashing the application. An attacker can cause a denial-of-service via a crafted 6LoWPAN frame.

DWRCC in SolarWinds DameWare Mini Remote Control 10.0 x64 has a Buffer Overflow associated with the size field for the machine name.

LBT T300-T390 v2.2.1.8 were discovered to contain a stack overflow via the ApCliSsid parameter in the generate_conf_router function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted POST request.

An issue was discovered in GNU LibreDWG 0.7 and 0.7.1645. There is a heap-based buffer overflow in the function dwg_decode_eed_data at decode.c for the y dimension.

In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: always filter entire AP matrix The vfio_ap_mdev_filter_matrix function is called whenever a new adapter or domain is assigned to the mdev. The purpose of the function is to update the guest's AP configuration by filtering the matrix of adapters and domains assigned to the mdev. When an adapter or domain is assigned, only the APQNs associated with the APID of the new adapter or APQI of the new domain are inspected. If an APQN does not reference a queue device bound to the vfio_ap device driver, then it's APID will be filtered from the mdev's matrix when updating the guest's AP configuration. Inspecting only the APID of the new adapter or APQI of the new domain will result in passing AP queues through to a guest that are not bound to the vfio_ap device driver under certain circumstances. Consider the following: guest's AP configuration (all also assigned to the mdev's matrix): 14.0004 14.0005 14.0006 16.0004 16.0005 16.0006 unassign domain 4 unbind queue 16.0005 assign domain 4 When domain 4 is re-assigned, since only domain 4 will be inspected, the APQNs that will be examined will be: 14.0004 16.0004 Since both of those APQNs reference queue devices that are bound to the vfio_ap device driver, nothing will get filtered from the mdev's matrix when updating the guest's AP configuration. Consequently, queue 16.0005 will get passed through despite not being bound to the driver. This violates the linux device model requirement that a guest shall only be given access to devices bound to the device driver facilitating their pass-through. To resolve this problem, every adapter and domain assigned to the mdev will be inspected when filtering the mdev's matrix.

A vulnerability has been identified in EN100 Ethernet module DNP3 IP variant (All versions), EN100 Ethernet module IEC 104 variant (All versions), EN100 Ethernet module IEC 61850 variant (All versions < V4.40), EN100 Ethernet module Modbus TCP variant (All versions), EN100 Ethernet module PROFINET IO variant (All versions). Affected applications contains a memory corruption vulnerability while parsing specially crafted HTTP packets to /txtrace endpoint manupulating a specific argument. This could allow an attacker to crash the affected application leading to a denial of service condition

Espruino 2v20 (commit fcc9ba4) was discovered to contain a Stack Overflow via the jspeFactorFunctionCall at src/jsparse.c.

A heap-based buffer overflow vulnerability exists in the Programming Software Connection FiBurn functionality of AutomationDirect P3-550E 1.2.10.9. A specially crafted network packet can lead to a buffer overflow. An attacker can send an unauthenticated packet to trigger this vulnerability.

The Linux Foundation Magma <= 1.8.0 (fixed in v1.9 commit 08472ba98b8321f802e95f5622fa90fec2dea486) was discovered to contain a buffer overflow in the decode_esm_message_container function at /nas/ies/EsmMessageContainer.cpp. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted NAS packet.

Nagios NRPE 3.2.1 has a Heap-Based Buffer Overflow, as demonstrated by interpretation of a small negative number as a large positive number during a bzero call.

OpenJPEG through 2.3.1 has a heap-based buffer overflow in opj_t1_clbl_decode_processor in openjp2/t1.c because of lack of opj_j2k_update_image_dimensions validation.

Two memory corruption vulnerabilities in the Aruba CX Switches Series 6200F, 6300, 6400, 8320, 8325, and 8400 have been found. Successful exploitation of these vulnerabilities could result in Local Denial of Service of the LLDP (Link Layer Discovery Protocol) process in the switch. This applies to firmware versions prior to 10.04.3021.

When a BIG-IP PEM classification profile is configured on a UDP virtual server, undisclosed requests can cause the Traffic Management Microkernel (TMM) to terminate. This issue affects classification engines using signatures released between 09-08-2022 and 02-16-2023. See the table in the F5 Security Advisory for a complete list of affected classification signature files.  NOTE: Software versions which have reached End of Technical Support (EoTS) are not evaluated

The Linux Foundation Magma <= 1.8.0 (fixed in v1.9 commit 08472ba98b8321f802e95f5622fa90fec2dea486) was discovered to contain a stack overflow in the decode_protocol_configuration_options function at /3gpp/3gpp_24.008_sm_ies.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted NAS packet.

Argo Events is an event-driven workflow automation framework for Kubernetes. Prior to version 1.7.1, several `HandleRoute` endpoints make use of the deprecated `ioutil.ReadAll()`. `ioutil.ReadAll()` reads all the data into memory. As such, an attacker who sends a large request to the Argo Events server will be able to crash it and cause denial of service. A patch for this vulnerability has been released in Argo Events version 1.7.1.

A Heap Overflow vulnerability in the SonicOS allows a remote unauthenticated attacker to cause Denial of Service (DoS) on the firewall SSLVPN service and leads to SonicOS crash. This vulnerability affected SonicOS Gen 5 version 5.9.1.7, 5.9.1.13, Gen 6 version 6.5.4.7, 6.5.1.12, 6.0.5.3, SonicOSv 6.5.4.v and Gen 7 version SonicOS 7.0.0.0.

Tenda AC Series Router AC18_V15.03.05.19(6318) has a stack-based buffer overflow vulnerability in function form_fast_setting_wifi_set

Tenda AX1803 v1.0.0.1_2890 is vulnerable to Buffer Overflow. The vulnerability lies in rootfs_ In / goform / setsystimecfg of / bin / tdhttpd in ubif file system, attackers can access http://ip/goform/SetSysTimeCfg, and by setting the ntpserve parameter, the stack buffer overflow can be caused to achieve the effect of router denial of service.

TOTOLINK A3100R V4.1.2cu.5050_B20200504 and V4.1.2cu.5247_B20211129 were discovered to contain a stack overflow via the macAddress parameter in the function setMacQos. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted POST request.

TOTOLINK A3100R V4.1.2cu.5050_B20200504 and V4.1.2cu.5247_B20211129 were discovered to contain a stack overflow via the url parameter in the function setUrlFilterRules. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted POST request.

TOTOLINK A3100R V4.1.2cu.5050_B20200504 and V4.1.2cu.5247_B20211129 were discovered to contain a stack overflow via the startTime and endTime parameters in the function setParentalRules. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted POST request.

A heap-based buffer overflow in a network service in Fastweb FASTGate MediaAccess FGA2130FWB, firmware version 18.3.n.0482_FW_230_FGA2130, and DGA4131FWB, firmware version up to 18.3.n.0462_FW_261_DGA4131, allows a remote attacker to reboot the device through a crafted HTTP request, causing DoS.