FactoryTalk Linx, in the Rockwell Automation PanelView Plus, allows an unauthenticated threat actor to read data from memory via crafted malicious packets. Sending a size larger than the buffer size results in leakage of data from memory resulting in an information disclosure. If the size is large enough, it causes communications over the common industrial protocol to become unresponsive to any type of packet, resulting in a denial-of-service to FactoryTalk Linx over the common industrial protocol.

A cross site scripting vulnerability was discovered in Rockwell Automation's ArmorStart ST product that could potentially allow a malicious user with admin privileges and network access to view user data and modify the web interface. Additionally, a malicious user could potentially cause interruptions to the availability of the web page.

A security issue exists due to improper handling of malformed CIP Forward Close packets during fuzzing. The controller enters a solid red Fault LED state and becomes unresponsive. Upon power cycle, the controller will enter recoverable fault where the MS LED and Fault LED become flashing red and reports fault code 0xF015. To recover, clear the fault.

A remote code execution security issue exists in the Rockwell Automation Arena®.  A crafted DOE file can force Arena Simulation to write beyond the boundaries of an allocated object. Exploitation requires user interaction, such as opening a malicious file within the software. If exploited, a threat actor could execute arbitrary code on the target system. The software must run under the context of the administrator in order to cause worse case impact. This is reflected in the Rockwell CVSS score, as AT:P.

A remote code execution security issue exists in the Rockwell Automation Arena®.  A crafted DOE file can force Arena Simulation to write beyond the boundaries of an allocated object. Exploitation requires user interaction, such as opening a malicious file within the software. If exploited, a threat actor could execute arbitrary code on the target system. The software must run under the context of the administrator in order to cause worse case impact. This is reflected in the Rockwell CVSS score, as AT:P.

Rockwell Automation FactoryTalk View Machine Edition on the PanelView Plus, improperly verifies user’s input, which allows unauthenticated attacker to achieve remote code executed via crafted malicious packets.  The device has the functionality, through a CIP class, to execute exported functions from libraries.  There is a routine that restricts it to execute specific functions from two dynamic link library files.  By using a CIP class, an attacker can upload a self-made library to the device which allows the attacker to bypass the security check and execute any code written in the function.

Rockwell Automation EtherNet/IP Web Server Modules 1756-EWEB (includes 1756-EWEBK) Version 5.001 and earlier, and CompactLogix 1768-EWEB Version 2.005 and earlier. A remote attacker could send a crafted UDP packet to the SNMP service causing a denial-of-service condition to occur until the affected product is restarted.

The affected products are vulnerable to an integer overflow or wraparound, which could  allow an attacker to crash the server and remotely execute arbitrary code.

The connection establishment algorithm found in Rockwell Automation CompactLogix 5370 and ControlLogix 5570 versions 33 and prior does not sufficiently manage its control flow during execution, creating an infinite loop. This may allow an attacker to send specially crafted CIP packet requests to a controller, which may cause denial-of-service conditions in communications with other products.

A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a memory leak or a reload of an affected device that leads to a denial of service (DoS) condition. The vulnerability is due to incorrect processing of certain IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device to be processed. A successful exploit could cause an affected device to continuously consume memory and eventually reload, resulting in a DoS condition. Cisco Bug IDs: CSCvf22394.

A vulnerability in the DHCP option 82 encapsulation functionality of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software performs incomplete input validation of option 82 information that it receives in DHCP Version 4 (DHCPv4) packets from DHCP relay agents. An attacker could exploit this vulnerability by sending a crafted DHCPv4 packet to an affected device. A successful exploit could allow the attacker to cause a heap overflow condition on the affected device, which will cause the device to reload and result in a DoS condition. Cisco Bug IDs: CSCvg62730.

A vulnerability in the Cisco IOS Software and Cisco IOS XE Software function that restores encapsulated option 82 information in DHCP Version 4 (DHCPv4) packets could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a Relay Reply denial of service (DoS) condition. The vulnerability exists because the affected software performs incomplete input validation of encapsulated option 82 information that it receives in DHCPOFFER messages from DHCPv4 servers. An attacker could exploit this vulnerability by sending a crafted DHCPv4 packet to an affected device, which the device would then forward to a DHCPv4 server. When the affected software processes the option 82 information that is encapsulated in the response from the server, an error could occur. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvg62754.

In Rockwell Automation FactoryTalk Services Platform, all versions, the redundancy host service (RdcyHost.exe) does not validate supplied identifiers, which could allow an unauthenticated, adjacent attacker to execute remote COM objects with elevated privileges.

FactoryTalk Linx versions 6.00, 6.10, and 6.11, RSLinx Classic v4.11.00 and prior,Connected Components Workbench: Version 12 and prior, ControlFLASH: Version 14 and later, ControlFLASH Plus: Version 1 and later, FactoryTalk Asset Centre: Version 9 and later, FactoryTalk Linx CommDTM: Version 1 and later, Studio 5000 Launcher: Version 31 and later Stud, 5000 Logix Designer software: Version 32 and prior is vulnerable. The parsing mechanism that processes certain file types does not provide input sanitation. This may allow an attacker to use specially crafted files to traverse the file system and modify or expose sensitive data or execute arbitrary code.

FactoryTalk Linx versions 6.00, 6.10, and 6.11, RSLinx Classic v4.11.00 and prior,Connected Components Workbench: Version 12 and prior, ControlFLASH: Version 14 and later, ControlFLASH Plus: Version 1 and later, FactoryTalk Asset Centre: Version 9 and later, FactoryTalk Linx CommDTM: Version 1 and later, Studio 5000 Launcher: Version 31 and later Stud, 5000 Logix Designer software: Version 32 and prior is vulnerable. An exposed API call allows users to provide files to be processed without sanitation. This may allow an attacker to specify a filename to execute unauthorized code and modify files or data.

A vulnerability in the DHCP option 82 encapsulation functionality of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software performs incomplete input validation of option 82 information that it receives in DHCP Version 4 (DHCPv4) packets from DHCP relay agents. An attacker could exploit this vulnerability by sending a crafted DHCPv4 packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCuh91645.

Improperly implemented option-field processing in the TCP/IP stack on Allen-Bradley L30ERMS safety devices v30 and earlier causes a denial of service. When a crafted TCP packet is received, the device reboots immediately.

An Improper Input Validation issue was discovered in Rockwell Automation MicroLogix 1100 controllers 1763-L16BWA, 1763-L16AWA, 1763-L16BBB, and 1763-L16DWD. A remote, unauthenticated attacker could send a single, specially crafted Programmable Controller Communication Commands (PCCC) packet to the controller that could potentially cause the controller to enter a DoS condition.

The FactoryTalk (FT) RNADiagReceiver service in Rockwell Automation Allen-Bradley FactoryTalk CPR9 through SR5 and RSLogix 5000 17 through 20 does not properly handle the return value from an unspecified function, which allows remote attackers to cause a denial of service (service outage) via a crafted packet.

The Rockwell Automation Thinmanager Thinserver is impacted by an improper input validation vulnerability.  Due to an improper input validation, a path traversal vulnerability exists, via the filename field, when the ThinManager processes a certain function. If exploited, an unauthenticated remote attacker can upload arbitrary files to any directory on the disk drive where ThinServer.exe is installed.  A malicious user could exploit this vulnerability by sending a crafted synchronization protocol message and potentially gain remote code execution abilities.

CVE-2024-7507 IMPACT A denial-of-service vulnerability exists in the affected products. This vulnerability occurs when a malformed PCCC message is received, causing a fault in the controller.

All versions of FactoryTalk View SE do not properly validate input of filenames within a project directory. A remote, unauthenticated attacker may be able to execute a crafted file on a remote endpoint that may result in remote code execution (RCE). Rockwell Automation recommends applying patch 1126289. Before installing this patch, the patch rollup dated 06 Apr 2020 or later MUST be applied. 1066644 – Patch Roll-up for CPR9 SRx.

Due to an improper input validation, an unauthenticated threat actor can send a malicious message to a monitor thread within Rockwell Automation ThinServer™ and cause a denial-of-service condition on the affected device.

An input validation vulnerability exists in the Rockwell Automation Sequence Manager™ which could allow a malicious user to send malformed packets to the server and cause a denial-of-service condition. If exploited, the device would become unresponsive, and a manual restart will be required for recovery. Additionally, if exploited, there could be a loss of view for the downstream equipment sequences in the controller. Users would not be able to view the status or command the equipment sequences, however the equipment sequence would continue to execute uninterrupted.

Due to an improper input validation, an unauthenticated threat actor can send a malicious message to invoke SQL injection into the program and cause a remote code execution condition on the Rockwell Automation ThinManager® ThinServer™.

A vulnerability exists in the Rockwell Automation FactoryTalk® View SE Datalog function that could allow a threat actor to inject a malicious SQL statement if the SQL database has no authentication in place or if legitimate credentials were stolen. If exploited, the attack could result in information exposure, revealing sensitive information. Additionally, a threat actor could potentially modify and delete the data in a remote database. An attack would only affect the HMI design time, not runtime.

An Improper Input Validation issue was discovered in Rockwell Automation FactoryTalk Alarms and Events, Version 2.90 and earlier. An unauthenticated attacker with remote access to a network with FactoryTalk Alarms and Events can send a specially crafted set of packets packet to Port 403/TCP (the history archiver service), causing the service to either stall or terminate.

An incorrect "pair?" check in the Scheme "length" procedure results in an unsafe pointer dereference in all CHICKEN Scheme versions prior to 4.13, which allows an attacker to cause a denial of service by passing an improper list to an application that calls "length" on it.

The qemu-nbd server in QEMU (aka Quick Emulator), when built with the Network Block Device (NBD) Server support, allows remote attackers to cause a denial of service (segmentation fault and server crash) by leveraging failure to ensure that all initialization occurs before talking to a client in the nbd_negotiate function.

The NFSv2/NFSv3 server in the nfsd subsystem in the Linux kernel through 4.10.11 allows remote attackers to cause a denial of service (system crash) via a long RPC reply, related to net/sunrpc/svc.c, fs/nfsd/nfs3xdr.c, and fs/nfsd/nfsxdr.c.

XStream through 1.4.9, when a certain denyTypes workaround is not used, mishandles attempts to create an instance of the primitive type 'void' during unmarshalling, leading to a remote application crash, as demonstrated by an xstream.fromXML("<void/>") call.

Palo Alto Networks Traps ESM Console before 3.4.4 allows attackers to cause a denial of service by leveraging improper validation of requests to revoke a Traps agent license.

From version 0.2.14 to 0.2.16 for Solana rBPF, function "relocate" in the file src/elf.rs has an integer overflow bug because the sym.st_value is read directly from ELF file without checking. If the sym.st_value is rather large, an integer overflow is triggered while calculating the variable "addr" via "addr = (sym.st_value + refd_pa) as u64";

iSmartAlarm cube devices allow Denial of Service. Sending a SYN flood on port 12345 will freeze the "cube" and it will stop responding.

An issue was discovered in the simple_asn1 crate 0.6.0 before 0.6.1 for Rust. There is a panic if UTCTime data, supplied by a remote attacker, has a second character greater than 0x7f.

IIPImage High Resolution Streaming Image Server prior to commit 882925b295a80ec992063deffc2a3b0d803c3195 is affected by an integer overflow in iipsrv.fcgi through malformed HTTP query parameters.

An issue was discovered in apng2gif 1.7. There is an integer overflow resulting in a heap-based buffer over-read, related to the load_apng function and the imagesize variable.

Multiple denial of service vulnerabilities exist in the cgiserver.cgi JSON command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability.

Multiple denial of service vulnerabilities exist in the cgiserver.cgi JSON command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability.

Affected devices don't process correctly certain special crafted packets sent to port 102/tcp, which could allow an attacker to cause a denial of service in the device.

Multiple denial of service vulnerabilities exist in the cgiserver.cgi JSON command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability.

Next.js is a React framework. In versions of Next.js prior to 12.0.5 or 11.1.3, invalid or malformed URLs could lead to a server crash. In order to be affected by this issue, the deployment must use Next.js versions above 11.1.0 and below 12.0.5, Node.js above 15.0.0, and next start or a custom server. Deployments on Vercel are not affected, along with similar environments where invalid requests are filtered before reaching Next.js. Versions 12.0.5 and 11.1.3 contain patches for this issue.

An issue was discovered in YottaDB through r1.32 and V7.0-000. A lack of input validation in calls to eb_div in sr_port/eb_muldiv.c allows attackers to crash the application by performing a divide by zero.

Multiple denial of service vulnerabilities exist in the cgiserver.cgi JSON command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability.

Multiple denial of service vulnerabilities exist in the cgiserver.cgi JSON command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability.

An issue was discovered in YottaDB through r1.32 and V7.0-000. A lack of input validation in calls to do_verify in sr_unix/do_verify.c allows attackers to attempt to jump to a NULL pointer by corrupting a function pointer.

Dell EMC Data Protection Central version 19.5 contains an Improper Input Validation Vulnerability. A remote unauthenticated attacker could potentially exploit this vulnerability, leading to denial of service.

Multiple denial of service vulnerabilities exist in the cgiserver.cgi JSON command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability.