RSSHub is an open source, extensible RSS feed generator. In commits prior to 5c4177441417 passing some special values to the `filter` and `filterout` parameters can cause an abnormally high CPU. This results in an impact on the performance of the servers and RSSHub services which may lead to a denial of service. This issue has been fixed in commit 5c4177441417 and all users are advised to upgrade. There are no known workarounds for this issue.

On F5 BIG-IP 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, and 14.1.x versions prior to 14.1.4.6, when BIG-IP packet filters are enabled and a virtual server is configured with the type set to Reject, undisclosed requests can cause an increase in memory resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

On F5 BIG-IP APM 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, when APM is configured on a virtual server and the associated access profile is configured with APM AAA NTLM Auth, undisclosed requests can cause an increase in internal resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

The Multipass service was found to have code paths that could be abused to cause a denial of service for authentication or authorization operations. A malicious attacker could perform an application-level denial of service attack, potentially causing authentication and/or authorization operations to fail for the duration of the attack. This could lead to performance degradation or login failures for customer Palantir Foundry environments. This vulnerability is resolved in Multipass 3.647.0. This issue affects: Palantir Foundry Multipass versions prior to 3.647.0.

The PROFINET (PNIO) stack, when integrated with the Interniche IP stack, improperly handles internal resources for TCP segments where the minimum TCP-Header length is less than defined. This could allow an attacker to create a denial of service condition for TCP services on affected devices by sending specially crafted TCP segments.

A vulnerability has been identified in SIMATIC RTLS Locating Manager (6GT2780-0DA00) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA30) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA30) (All versions < V3.0.1.1). Affected applications do not properly release memory that is allocated when handling specifically crafted incoming packets. This could allow an unauthenticated remote attacker to cause a denial of service condition by crashing the service when it runs out of memory. The service is restarted automatically after a short time.

On version 16.1.x before 16.1.2, 15.1.x before 15.1.4.1, 14.1.x before 14.1.4.5, and all versions of 13.1.x, when the BIG-IP Virtual Edition (VE) uses the ixlv driver (which is used in SR-IOV mode and requires Intel X710/XL710/XXV710 family of network adapters on the Hypervisor) and TCP Segmentation Offload configuration is enabled, undisclosed requests may cause an increase in CPU resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

Helm is a tool for managing Charts, pre-configured Kubernetes resources. Versions prior to 3.10.3 are subject to Uncontrolled Resource Consumption, resulting in Denial of Service. Input to functions in the _strvals_ package can cause a stack overflow. In Go, a stack overflow cannot be recovered from. Applications that use functions from the _strvals_ package in the Helm SDK can have a Denial of Service attack when they use this package and it panics. This issue has been patched in 3.10.3. SDK users can validate strings supplied by users won't create large arrays causing significant memory usage before passing them to the _strvals_ functions.

Excessive platform resource consumption within a loop issue exists in Cybozu Garoon 5.0.0 to 5.15.2. If this vulnerability is exploited, processing a crafted mail may cause a denial-of-service (DoS) condition.

A vulnerability, which was classified as problematic, was found in JoeyBling bootplus up to 247d5f6c209be1a5cf10cd0fa18e1d8cc63cf55d. Affected is the function qrCode of the file src/main/java/io/github/controller/QrCodeController.java. The manipulation of the argument w/h leads to resource consumption. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available.

jsx-slack is a library for building JSON objects for Slack Block Kit surfaces from JSX. In versions prior to 4.5.1 users are vulnerable to a regular expression denial-of-service (ReDoS) attack. If attacker can put a lot of JSX elements into `<blockquote>` tag, an internal regular expression for escaping characters may consume an excessive amount of computing resources. jsx-slack v4.5.1 has patched to a regex for escaping blockquote characters. Users are advised to upgrade as soon as possible.

jsx-slack is a package for building JSON objects for Slack block kit surfaces from JSX. The maintainers found the patch for CVE-2021-43838 in jsx-slack v4.5.1 is insufficient tfor protection from a Regular Expression Denial of Service (ReDoS) attack. If an attacker can put a lot of JSX elements into `<blockquote>` tag _with including multibyte characters_, an internal regular expression for escaping characters may consume an excessive amount of computing resources. v4.5.1 passes the test against ASCII characters but misses the case of multibyte characters. jsx-slack v4.5.2 has updated regular expressions for escaping blockquote characters to prevent catastrophic backtracking. It is also including an updated test case to confirm rendering multiple tags in `<blockquote>` with multibyte characters.

Wire-server is the system server for the wire back-end services. Releases prior to v2022-03-01 are subject to a denial of service attack via a crafted object causing a hash collision. This collision causes the server to spend at least quadratic time parsing it which can lead to a denial of service for a heavily used server. The issue has been fixed in wire-server 2022-03-01 and is already deployed on all Wire managed services. On premise instances of wire-server need to be updated to 2022-03-01, so that their backends are no longer affected. There are no known workarounds for this issue.

A flaw was found in AMQ Broker. This issue can cause a partial interruption to the availability of AMQ Broker via an Out of memory (OOM) condition. This flaw allows an attacker to partially disrupt availability to the broker through a sustained attack of maliciously crafted messages. The highest threat from this vulnerability is system availability.

There exists a security vulnerability in Jetty's DosFilter which can be exploited by unauthorized users to cause remote denial-of-service (DoS) attack on the server using DosFilter. By repeatedly sending crafted requests, attackers can trigger OutofMemory errors and exhaust the server's memory finally.

Passport-SAML is a SAML 2.0 authentication provider for Passport, the Node.js authentication library. Prior to version 3.1.0, a malicious SAML payload can require transforms that consume significant system resources to process, thereby resulting in reduced or denied service. This would be an effective way to perform a denial-of-service attack. This has been resolved in version 3.1.0. The resolution is to limit the number of allowable transforms to 2.

An unauthenticated Denial-of-Service (DoS) vulnerability exists in the Spectrum service accessed via the PAPI protocol in ArubaOS 8.x. Successful exploitation of this vulnerability results in the ability to interrupt the normal operation of the affected service.

It was discovered that the is-my-json-valid JavaScript library used an inefficient regular expression to validate JSON fields defined to have email format. A specially crafted JSON file could cause it to consume an excessive amount of CPU time when validated.

Cosign is a sigstore signing tool for OCI containers. Cosign is susceptible to a denial of service by an attacker controlled registry. An attacker who controls a remote registry can return a high number of attestations and/or signatures to Cosign and cause Cosign to enter a long loop resulting in an endless data attack. The root cause is that Cosign loops through all attestations fetched from the remote registry in pkg/cosign.FetchAttestations. The attacker needs to compromise the registry or make a request to a registry they control. When doing so, the attacker must return a high number of attestations in the response to Cosign. The result will be that the attacker can cause Cosign to go into a long or infinite loop that will prevent other users from verifying their data. In Kyvernos case, an attacker whose privileges are limited to making requests to the cluster can make a request with an image reference to their own registry, trigger the infinite loop and deny other users from completing their admission requests. Alternatively, the attacker can obtain control of the registry used by an organization and return a high number of attestations instead the expected number of attestations. The issue can be mitigated rather simply by setting a limit to the limit of attestations that Cosign will loop through. The limit does not need to be high to be within the vast majority of use cases and still prevent the endless data attack. This issue has been patched in version 2.2.1 and users are advised to upgrade.

In JetBrains Toolbox App before 2.2 a DoS attack was possible via a malicious SVG image

Squid is an open source caching proxy for the Web supporting HTTP, HTTPS, FTP, and more. Due to a Collapse of Data into Unsafe Value bug ,Squid may be vulnerable to a Denial of Service attack against HTTP header parsing. This problem allows a remote client or a remote server to perform Denial of Service when sending oversized headers in HTTP messages. In versions of Squid prior to 6.5 this can be achieved if the request_header_max_size or reply_header_max_size settings are unchanged from the default. In Squid version 6.5 and later, the default setting of these parameters is safe. Squid will emit a critical warning in cache.log if the administrator is setting these parameters to unsafe values. Squid will not at this time prevent these settings from being changed to unsafe values. Users are advised to upgrade to version 6.5. There are no known workarounds for this vulnerability. This issue is also tracked as SQUID-2024:2

The integrated ICMP service of the network stack of affected devices can be forced to exhaust its available memory resources when receiving specially crafted messages targeting IP fragment re-assembly. This could allow an unauthenticated remote attacker to cause a temporary denial of service condition of the ICMP service, other communication services are not affected. Affected devices will resume normal operation after the attack terminates.

Vulnerability in the Java SE, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: Swing). Supported versions that are affected are Java SE: 7u311, 8u301, 11.0.12, 17; Oracle GraalVM Enterprise Edition: 20.3.3 and 21.2.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Java SE, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Java SE, Oracle GraalVM Enterprise Edition. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability can also be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. CVSS 3.1 Base Score 5.3 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L).

A uncontrolled resource consumption in Fortinet FortiWeb version 6.4.0, version 6.3.15 and below, 6.2.5 and below allows attacker to cause a denial of service for webserver daemon via crafted HTTP requests

Envoy is a high-performance edge/middle/service proxy. The regex expression is compiled for every request and can result in high CPU usage and increased request latency when multiple routes are configured with such matchers. This issue has been addressed in released 1.29.1, 1.28.1, 1.27.3, and 1.26.7. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Synapse is a Matrix reference homeserver written in python (pypi package matrix-synapse). Matrix is an ecosystem for open federated Instant Messaging and VoIP. In Synapse before version 1.33.2 "Push rules" can specify conditions under which they will match, including `event_match`, which matches event content against a pattern including wildcards. Certain patterns can cause very poor performance in the matching engine, leading to a denial-of-service when processing moderate length events. The issue is patched in version 1.33.2. A potential workaround might be to prevent users from making custom push rules, by blocking such requests at a reverse-proxy.

A vulnerability exists in the affected product that allows a malicious user to restart the Rockwell Automation PanelView™ Plus 7 terminal remotely without security protections. If the vulnerability is exploited, it could lead to the loss of view or control of the PanelView™ product.

ws is an open source WebSocket client and server library for Node.js. A specially crafted value of the `Sec-Websocket-Protocol` header can be used to significantly slow down a ws server. The vulnerability has been fixed in ws@7.4.6 (https://github.com/websockets/ws/commit/00c425ec77993773d823f018f64a5c44e17023ff). In vulnerable versions of ws, the issue can be mitigated by reducing the maximum allowed length of the request headers using the [`--max-http-header-size=size`](https://nodejs.org/api/cli.html#cli_max_http_header_size_size) and/or the [`maxHeaderSize`](https://nodejs.org/api/http.html#http_http_createserver_options_requestlistener) options.

In mlflow/mlflow version v2.13.2, a vulnerability exists that allows the creation or renaming of an experiment with a large number of integers in its name due to the lack of a limit on the experiment name. This can cause the MLflow UI panel to become unresponsive, leading to a potential denial of service. Additionally, there is no character limit in the `artifact_location` parameter while creating the experiment.

JPA Server in HAPI FHIR before 5.4.0 allows a user to deny service (e.g., disable access to the database after the attack stops) via history requests. This occurs because of a SELECT COUNT statement that requires a full index scan, with an accompanying large amount of server resources if there are many simultaneous history requests.

A vulnerability has been found in MarkText up to 0.17.1 and classified as problematic. Affected by this vulnerability is the function getRecommendTitleFromMarkdownString of the file marktext/src/main/utils/index.js. The manipulation leads to inefficient regular expression complexity. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as problematic was found in Unitech pm2 up to 6.0.6. This vulnerability affects unknown code of the file /lib/tools/Config.js. The manipulation leads to inefficient regular expression complexity. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability in system resource management in Cisco UCS 6400 and 6500 Series Fabric Interconnects that are in Intersight Managed Mode (IMM) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the Device Console UI of an affected device. This vulnerability is due to insufficient rate-limiting of TCP connections to an affected device. An attacker could exploit this vulnerability by sending a high number of TCP packets to the Device Console UI. A successful exploit could allow an attacker to cause the Device Console UI process to crash, resulting in a DoS condition. A manual reload of the fabric interconnect is needed to restore complete functionality.

A vulnerability in the SSH server of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition for the SSH server of an affected device. This vulnerability is due to a logic error when an SSH session is established. An attacker could exploit this vulnerability by sending crafted SSH messages to an affected device. A successful exploit could allow the attacker to exhaust available SSH resources on the affected device so that new SSH connections to the device are denied, resulting in a DoS condition. Existing SSH connections to the device would continue to function normally. The device must be rebooted manually to recover. However, user traffic would not be impacted and could be managed using a remote application such as Cisco Adaptive Security Device Manager (ASDM).

Cloudflare quiche was discovered to be vulnerable to unbounded storage of information related to connection ID retirement, which could lead to excessive resource consumption. Each QUIC connection possesses a set of connection Identifiers (IDs); see RFC 9000 Section 5.1 https://datatracker.ietf.org/doc/html/rfc9000#section-5.1 . Endpoints declare the number of active connection IDs they are willing to support using the active_connection_id_limit transport parameter. The peer can create new IDs using a NEW_CONNECTION_ID frame but must stay within the active ID limit. This is done by retirement of old IDs, the endpoint sends NEW_CONNECTION_ID includes a value in the retire_prior_to field, which elicits a RETIRE_CONNECTION_ID frame as confirmation. An unauthenticated remote attacker can exploit the vulnerability by sending NEW_CONNECTION_ID frames and manipulating the connection (e.g. by restricting the peer's congestion window size) so that RETIRE_CONNECTION_ID frames can only be sent at a slower rate than they are received, leading to storage of information related to connection IDs in an unbounded queue. Quiche versions 0.19.2 and 0.20.1 are the earliest to address this problem. There is no workaround for affected versions.

The Calculated Fields Form plugin for WordPress is vulnerable to Denial of Service in all versions up to, and including, 5.2.63. This is due to unlimited height and width parameters for CAPTCHA images. This makes it possible for unauthenticated attackers to send multiple requests with large values, resulting in slowing server resources if the server does not mitigate Denial of Service attacks.

For certain systems running EOS, a Precision Time Protocol (PTP) packet of a management/signaling message with an invalid Type-Length-Value (TLV) causes the PTP agent to restart. Repeated restarts of the service will make the service unavailable.

A vulnerability, which was classified as problematic, has been found in Tongda OA 2017 up to 11.7. This issue affects some unknown processing of the file /inc/package_static_resources.php. The manipulation leads to resource consumption. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

Adobe Commerce versions 2.4.7-beta1 (and earlier), 2.4.6-p2 (and earlier), 2.4.5-p4 (and earlier) and 2.4.4-p5 (and earlier) are affected by a Uncontrolled Resource Consumption vulnerability that could lead in minor application denial-of-service. Exploitation of this issue does not require user interaction.

A vulnerability was found in JWCrypto. This flaw allows an attacker to cause a denial of service (DoS) attack and possible password brute-force and dictionary attacks to be more resource-intensive. This issue can result in a large amount of computational consumption, causing a denial of service attack.

A vulnerability of Uncontrolled Resource Consumption has been identified in STARDOM provided by Yokogawa Electric Corporation. This vulnerability may allow to a remote attacker to cause a denial-of-service condition to the FCN/FCJ controller by sending a crafted packet. While sending the packet, the maintenance homepage of the controller could not be accessed. Therefore, functions of the maintenance homepage, changing configuration, viewing logs, etc. are not available. But the controller’s operation is not stopped by the condition. The affected products and versions are as follows: STARDOM FCN/FCJ R1.01 to R4.31.

Mattermost fails to properly sanitize the request to /api/v4/redirect_location allowing an attacker, sending a specially crafted request to /api/v4/redirect_location, to fill up the memory due to caching large items.

A regression was introduced in the Red Hat build of python-eventlet due to a change in the patch application strategy, resulting in a patch for CVE-2021-21419 not being applied for all builds of all products.

The tokio-boring library in version 4.0.0 is affected by a memory leak issue that can lead to excessive resource consumption and potential DoS by resource exhaustion. The set_ex_data function used by the library did not deallocate memory used by pre-existing data in memory each time after completing a TLS connection causing the program to consume more resources with each new connection.

Dell PowerScale InsightIQ, version 5.2, contains an uncontrolled resource consumption vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to denial of service.

erlang-jose (aka JOSE for Erlang and Elixir) through 1.11.6 allow attackers to cause a denial of service (CPU consumption) via a large p2c (aka PBES2 Count) value in a JOSE header.

lestrrat-go/jwx is a Go module implementing various JWx (JWA/JWE/JWK/JWS/JWT, otherwise known as JOSE) technologies. A p2c parameter set too high in JWE's algorithm PBES2-* could lead to a denial of service. The JWE key management algorithms based on PBKDF2 require a JOSE Header Parameter called p2c (PBES2 Count). This parameter dictates the number of PBKDF2 iterations needed to derive a CEK wrapping key. Its primary purpose is to intentionally slow down the key derivation function, making password brute-force and dictionary attacks more resource- intensive. Therefore, if an attacker sets the p2c parameter in JWE to a very large number, it can cause a lot of computational consumption, resulting in a denial of service. This vulnerability has been addressed in commit `64f2a229b` which has been included in release version 1.2.27 and 2.0.18. Users are advised to upgrade. There are no known workarounds for this vulnerability.

A vulnerability was found in zhangyd-c OneBlog up to 2.3.9. It has been classified as problematic. Affected is an unknown function of the component HTTP Header Handler. The manipulation of the argument X-Forwarded-For leads to inefficient regular expression complexity. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.