From version 0.2.14 to 0.2.16 for Solana rBPF, function "relocate" in the file src/elf.rs has an integer overflow bug because the sym.st_value is read directly from ELF file without checking. If the sym.st_value is rather large, an integer overflow is triggered while calculating the variable "addr" via "addr = (sym.st_value + refd_pa) as u64";
Solana solana_rbpf before 0.2.29 has an addition integer overflow via invalid ELF program headers. elf.rs has a panic via a malformed eBPF program.
A vulnerability, which was classified as critical, was found in TOTOLINK A702R 4.0.0-B20230721.1521. Affected is an unknown function of the file /boafrm/formFilter of the component HTTP POST Request Handler. The manipulation of the argument ip6addr leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.
A vulnerability has been found in TOTOLINK X15 1.0.0-B20230714.1105 and classified as critical. This vulnerability affects unknown code of the file /boafrm/formFilter of the component HTTP POST Request Handler. The manipulation of the argument ip6addr/url/vpnPassword/vpnUser leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /boafrm/formMultiAPVLAN of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.
Multiple off-by-one errors in fsplib.c in fsplib before 0.8 allow attackers to cause a denial of service via unspecified vectors involving the (1) name and (2) d_name entry attributes.
A vulnerability classified as critical has been found in TOTOLINK X15 up to 1.0.0-B20230714.1105. Affected is an unknown function of the file /boafrm/formParentControl of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105 and classified as critical. This issue affects some unknown processing of the file /boafrm/formMapDel of the component HTTP POST Request Handler. The manipulation of the argument devicemac1 leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.
A denial-of-service vulnerability exists in specific Rockwell Automation ControlLogix ang GuardLogix controllers. If exploited, the product could potentially experience a major nonrecoverable fault (MNRF). The device will restart itself to recover from the MNRF.
contrib/slapd-modules/nops/nops.c in OpenLDAP through 2.4.45, when both the nops module and the memberof overlay are enabled, attempts to free a buffer that was allocated on the stack, which allows remote attackers to cause a denial of service (slapd crash) via a member MODDN operation.
A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105. It has been rated as critical. Affected by this issue is some unknown functionality of the file /boafrm/formRoute of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
In Tidy 5.7.0, the prvTidyTidyMetaCharset function in clean.c allows attackers to cause a denial of service (Segmentation Fault), because the currentNode variable in the "children of the head" processing feature is modified in the loop without validating the new value.
In Modem, there is a possible system crash due to incorrect error handling. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01297806; Issue ID: MSV-1481.
A vulnerability was found in quickjs-ng QuickJS up to 0.8.0. It has been declared as problematic. Affected by this vulnerability is the function JS_GetRuntime of the file quickjs.c of the component qjs. The manipulation leads to stack-based buffer overflow. The attack can be launched remotely. Upgrading to version 0.9.0 is able to address this issue. The patch is named 99c02eb45170775a9a679c32b45dd4000ea67aff. It is recommended to upgrade the affected component.
A Buffer Access with Incorrect Length Value vulnerablity in the TEE_CipherUpdate function in Samsung mTower through 0.3.0 allows a trusted application to trigger a Denial of Service (DoS) by invoking the function TEE_CipherUpdate with an excessive size value of srcLen.
Multiple buffer overflows in Schneider Electric Modicon Quantum PLC allow remote attackers to cause a denial of service via malformed requests to the (1) FTP server or (2) HTTP server.
A vulnerability, which was classified as critical, was found in Axiomatic Bento4. This affects the function AP4_MemoryByteStream::WritePartial of the file Ap4ByteStream.cpp of the component mp42aac. The manipulation leads to heap-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-212007.
On Patlite NH-FB series devices through 1.46, remote attackers can cause a denial of service by omitting the query string. NOTE: the vendor's perspective is that "omitting the query string does not cause a denial of service and the indicated event can not be reproduced.
A CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability exists that could cause denial of service when parsing the URL. Affected Products: X80 advanced RTU Communication Module (BMENOR2200H) (V1.0), OPC UA Modicon Communication Module (BMENUA0100) (V1.10 and prior)
A vulnerability was found in Exim and classified as problematic. This issue affects some unknown processing of the component Regex Handler. The manipulation leads to use after free. The name of the patch is 4e9ed49f8f12eb331b29bd5b6dc3693c520fddc2. It is recommended to apply a patch to fix this issue. The identifier VDB-211073 was assigned to this vulnerability.
Extreme EXOS 15.7, 16.x, 21.x, and 22.x allows remote attackers to trigger a buffer overflow leading to a reboot.
A vulnerability has been identified in EN100 Ethernet module DNP3 IP variant (All versions), EN100 Ethernet module IEC 104 variant (All versions), EN100 Ethernet module IEC 61850 variant (All versions < V4.40), EN100 Ethernet module Modbus TCP variant (All versions), EN100 Ethernet module PROFINET IO variant (All versions). Affected applications contains a memory corruption vulnerability while parsing specially crafted HTTP packets to /txtrace endpoint manupulating a specific argument. This could allow an attacker to crash the affected application leading to a denial of service condition
RIOT-OS, an operating system for Internet of Things (IoT) devices, contains a network stack with the ability to process 6LoWPAN frames. Prior to version 2023.04, an attacker can send a crafted frame to the device resulting in an integer underflow and out of bounds access in the packet buffer. Triggering the access at the right time will corrupt other packets or the allocator metadata. Corrupting a pointer will lead to denial of service. This issue is fixed in version 2023.04. As a workaround, disable SRH in the network stack.
A vulnerability was found in TOTOLINK A702R, A3002R, A3002RU and EX1200T 3.0.0-B20230809.1615/4.0.0-B20230531.1404/4.0.0-B20230721.1521/4.1.2cu.5232_B20210713. It has been classified as critical. Affected is an unknown function of the file /boafrm/formIPv6Addr of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.
Zoom clients before version 5.13.5 contain a STUN parsing vulnerability. A malicious actor could send specially crafted UDP traffic to a victim Zoom client to remotely cause the client to crash, causing a denial of service.
A vulnerability has been identified in SIEMENS LOGO!8 (6ED1052-xyyxx-0BA8 FS:01 to FS:06 / Firmware version V1.80.xx and V1.81.xx), SIEMENS LOGO!8 (6ED1052-xyy08-0BA0 FS:01 / Firmware version < V1.82.02). An attacker with network access to port 10005/tcp of the LOGO! device could cause a Denial-of-Service condition by sending specially crafted packets. The security vulnerability could be exploited by an unauthenticated attacker with network access to the affected service. No user interaction is required to exploit this security vulnerability. Successful exploitation of the security vulnerability compromises availability of the targeted system. At the time of advisory publication no public exploitation of this security vulnerability was known.
An exploitable memory corruption vulnerability exists in the Name Service Client functionality of 3S-Smart Software Solutions CODESYS GatewayService. A specially crafted packet can cause a large memcpy, resulting in an access violation and termination of the process. An attacker can send a packet to a device running the GatewayService.exe to trigger this vulnerability. All variants of the CODESYS V3 products in all versions prior V3.5.16.10 containing the CmpRouter or CmpRouterEmbedded component are affected, regardless of the CPU type or operating system: CODESYS Control for BeagleBone, CODESYS Control for emPC-A/iMX6, CODESYS Control for IOT2000, CODESYS Control for Linux, CODESYS Control for PLCnext, CODESYS Control for PFC100, CODESYS Control for PFC200, CODESYS Control for Raspberry Pi, CODESYS Control RTE V3, CODESYS Control RTE V3 (for Beckhoff CX), CODESYS Control Win V3 (also part of the CODESYS Development System setup), CODESYS Control V3 Runtime System Toolkit, CODESYS V3 Embedded Target Visu Toolkit, CODESYS V3 Remote Target Visu Toolkit, CODESYS V3 Safety SIL2, CODESYS Edge Gateway V3, CODESYS Gateway V3, CODESYS HMI V3, CODESYS OPC Server V3, CODESYS PLCHandler SDK, CODESYS V3 Simulation Runtime (part of the CODESYS Development System).
In BIG-IP Versions 16.1.x before 16.1.2.2, 15.1.x before 15.1.6.1, 14.1.x before 14.1.5, and all versions of 13.1.x, when a BIG-IP LTM Client SSL profile is configured on a virtual server to perform client certificate authentication with session tickets enabled, undisclosed requests cause the Traffic Management Microkernel (TMM) to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
The dag-pb codec can panic when decoding invalid blocks.
The SIP module of some Huawei products have a denial of service (DoS) vulnerability. A remote attacker could exploit these three vulnerabilities by sending the specially crafted messages to the affected device. Due to the insufficient verification of the packets, successful exploit could allow the attacker to cause buffer overflow and dead loop, leading to DoS condition. Affected products can be found in https://www.huawei.com/en/psirt/security-advisories/huawei-sa-20200115-01-sip-en.
The SIP module of some Huawei products have a denial of service (DoS) vulnerability. A remote attacker could exploit these three vulnerabilities by sending the specially crafted messages to the affected device. Due to the insufficient verification of the packets, successful exploit could allow the attacker to cause buffer overflow and dead loop, leading to DoS condition. Affected products can be found in https://www.huawei.com/en/psirt/security-advisories/huawei-sa-20200115-01-sip-en.
A vulnerability has been identified in EN100 Ethernet module DNP3 IP variant (All versions), EN100 Ethernet module IEC 104 variant (All versions), EN100 Ethernet module IEC 61850 variant (All versions < V4.37), EN100 Ethernet module Modbus TCP variant (All versions), EN100 Ethernet module PROFINET IO variant (All versions). Affected applications contains a memory corruption vulnerability while parsing specially crafted HTTP packets to /txtrace endpoint. This could allow an attacker to crash the affected application leading to a denial of service condition.
A vulnerability has been identified in EN100 Ethernet module DNP3 variant (All versions), EN100 Ethernet module IEC 61850 variant (All versions < V4.37), EN100 Ethernet module IEC104 variant (All versions), EN100 Ethernet module Modbus TCP variant (All versions), EN100 Ethernet module PROFINET IO variant (All versions). An unauthorized user could exploit a buffer overflow vulnerability in the webserver. Specially crafted packets sent could cause a Denial-of-Service condition and if certain conditions are met, the affected devices must be restarted manually to fully recover. At the time of advisory publication no public exploitation of this security vulnerability was known.
In Wireshark 3.0.0 to 3.0.2, 2.6.0 to 2.6.9, and 2.4.0 to 2.4.15, the ASN.1 BER dissector and related dissectors could crash. This was addressed in epan/asn1.c by properly restricting buffer increments.
A vulnerability in the FTP inspection engine of Cisco Adaptive Security (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of FTP data. An attacker could exploit this vulnerability by sending malicious FTP traffic through an affected device. A successful exploit could allow the attacker to cause a DoS condition on the affected device.
A drm driver have oob problem, could cause the system crash or EOPProduct: AndroidVersions: Android SoCAndroid ID: A-233124709
A vulnerability was found in D-Link DCS-932L 2.18.01. It has been declared as critical. Affected by this vulnerability is the function setSystemEmail of the file /setSystemEmail. The manipulation of the argument EmailSMTPPortNumber leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability has been found in TP-Link TL-WR841N V11. The vulnerability exists in the /userRpm/Wan6to4TunnelCfgRpm.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability has been found in TP-Link TL-WR841N V11. The vulnerability exists in the /userRpm/WlanNetworkRpm_APC.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability has been found in TP-Link TL-WR841N V11. The vulnerability exists in the /userRpm/WzdWlanSiteSurveyRpm_AP.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability has been found in TP-Link TL-WR841N V11. The vulnerability exists in the /userRpm/WlanNetworkRpm.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability has been found in TP-Link TL-WR841N V11. The vulnerability exists in the /userRpm/WlanNetworkRpm_AP.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability has been found in Netgear R6900P and R7000P 1.3.3.154 and classified as critical. Affected by this vulnerability is the function sub_16C4C of the component HTTP Header Handler. The manipulation of the argument Host leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
Buffer overflow vulnerabilities exist in FRRouting through 8.1.0 due to wrong checks on the input packet length in isisd/isis_tlvs.c.
A malformed packet causes a stack overflow in the Ember ZNet stack. This causes an assert which leads to a reset, immediately clearing the error.
In Eclipse OpenJ9 prior to the 0.14.0 release, the Java bytecode verifier incorrectly allows a method to execute past the end of bytecode array causing crashes. Eclipse OpenJ9 v0.14.0 correctly detects this case and rejects the attempted class load.
A vulnerability, which was classified as critical, has been found in TP-Link VN020 F3v(T) TT_V6.2.1021. Affected by this issue is some unknown functionality of the component DHCP DISCOVER Packet Parser. The manipulation of the argument hostname leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was found in Tenda AC10 16.03.10.13 and classified as critical. Affected by this issue is some unknown functionality of the file /goform/UserCongratulationsExec. The manipulation of the argument getuid leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
Improper Input Validation vulnerability in Hitachi Energy MicroSCADA X SYS600 while reading a specific configuration file causes a buffer-overflow that causes a failure to start the SYS600. The configuration file can only be accessed by an administrator access. This issue affects: Hitachi Energy MicroSCADA X SYS600 version 10 to version 10.3.1. cpe:2.3:a:hitachienergy:microscada_x_sys600:10:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.1:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.1.1:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.2:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.2.1:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.3:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.3.1:*:*:*:*:*:*:*
Calling Buffer.fill() or Buffer.alloc() with some parameters can lead to a hang which could result in a Denial of Service. In order to address this vulnerability, the implementations of Buffer.alloc() and Buffer.fill() were updated so that they zero fill instead of hanging in these cases. All versions of Node.js 6.x (LTS "Boron"), 8.x (LTS "Carbon"), and 9.x are vulnerable. All versions of Node.js 10.x (Current) are NOT vulnerable.