Unbound before 1.9.5 allows an infinite loop via a compressed name in dname_pkt_copy. NOTE: The vendor disputes that this is a vulnerability. Although the code may be vulnerable, a running Unbound installation cannot be remotely or locally exploited

A flaw was found in FRRouting when parsing certain babeld unicast hello messages that are intended to be ignored. This issue may allow an attacker to send specially crafted hello messages with the unicast flag set, the interval field set to 0, or any TLV that contains a sub-TLV with the Mandatory flag set to enter an infinite loop and cause a denial of service.

In Lib/tarfile.py in Python through 3.8.3, an attacker is able to craft a TAR archive leading to an infinite loop when opened by tarfile.open, because _proc_pax lacks header validation.

An issue was discovered in Qt before 5.15.15, 6.x before 6.2.10, and 6.3.x through 6.5.x before 6.5.3. There are infinite loops in recursive entity expansion.

In Jp2Image::readMetadata() in jp2image.cpp in Exiv2 0.27.2, an input file can result in an infinite loop and hang, with high CPU consumption. Remote attackers could leverage this vulnerability to cause a denial of service via a crafted file.

Tenda PA6 Wi-Fi Powerline extender 1.0.1.21 is vulnerable to a denial of service, caused by an error in the "homeplugd" process. By sending a specially crafted UDP packet, an attacker could exploit this vulnerability to cause the device to reboot.

The validators package 0.12.2 through 0.12.5 for Python enters an infinite loop when validators.domain is called with a crafted domain string. This is fixed in 0.12.6.

Istio 1.3.x before 1.3.5 allows Denial of Service because continue_on_listener_filters_timeout is set to True, a related issue to CVE-2019-18836.

Envoy 1.12.0 allows a remote denial of service because of resource loops, as demonstrated by a single idle TCP connection being able to keep a worker thread in an infinite busy loop when continue_on_listener_filters_timeout is used."

ise smart connect KNX Vaillant 1.2.839 contain a Denial of Service.

ProFTPD before 1.3.6b and 1.3.7rc before 1.3.7rc2 allows remote unauthenticated denial-of-service due to incorrect handling of overly long commands because main.c in a child process enters an infinite loop.

OPenFGA is an open source authorization/permission engine built for developers. OpenFGA versions v1.1.0 and prior are vulnerable to a DoS attack when Check and ListObjects calls are executed against authorization models that contain circular relationship definitions. Users are affected by this vulnerability if they are using OpenFGA v1.1.0 or earlier, and if you are executing `Check` or `ListObjects` calls against a vulnerable authorization model. Users are advised to upgrade to version 1.1.1. There are no known workarounds for this vulnerability. Users that do not have circular relationships in their models are not affected.

An issue was discovered in GitLab Community and Enterprise Edition 11 through 12.4 when building Nested GraphQL queries. It has a large or infinite loop.

Improper Check for filenames with overly long extensions in PostMaster (sending in email) or uploading files (e.g. attaching files to mails) of ((OTRS)) Community Edition and OTRS allows an remote attacker to cause an endless loop. This issue affects: OTRS AG: ((OTRS)) Community Edition 5.0.x version 5.0.38 and prior versions; 6.0.x version 6.0.23 and prior versions. OTRS AG: OTRS 7.0.x version 7.0.12 and prior versions.

In Wireshark 3.0.0 to 3.0.3 and 2.6.0 to 2.6.10, the Gryphon dissector could go into an infinite loop. This was addressed in plugins/epan/gryphon/packet-gryphon.c by checking for a message length of zero.

In the TCP implementation (gnrc_tcp) in RIOT through 2019.07, the parser for TCP options does not terminate on all inputs, allowing a denial-of-service, because sys/net/gnrc/transport_layer/tcp/gnrc_tcp_option.c has an infinite loop for an unknown zero-length option.

An infinite loop vulnerability was found in Samba's mdssvc RPC service for Spotlight. When parsing Spotlight mdssvc RPC packets sent by the client, the core unmarshalling function sl_unpack_loop() did not validate a field in the network packet that contains the count of elements in an array-like structure. By passing 0 as the count value, the attacked function will run in an endless loop consuming 100% CPU. This flaw allows an attacker to issue a malformed RPC request, triggering an infinite loop, resulting in a denial of service condition.

An issue was discovered in the Linux kernel before 5.0.4. The 9p filesystem did not protect i_size_write() properly, which causes an i_size_read() infinite loop and denial of service on SMP systems.

A Denial-of-Service (DoS) vulnerability was discovered in F-Secure & WithSecure products whereby the aegen.dll will go into an infinite loop when unpacking PE files. This eventually leads to scanning engine crash. The exploit can be triggered remotely by an attacker.

A Denial-of-Service vulnerability was discovered in the F-Secure and WithSecure products where aerdl.dll may go into an infinite loop when unpacking PE files. It is possible that this can crash the scanning engine.

libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned about a server's certificate chain.Due to an erroneous function, a malicious server could make libcurl built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.

A vulnerability in aimhubio/aim version 3.19.3 allows an attacker to cause an infinite loop by configuring the remote tracking server to point at itself. This results in the server endlessly connecting to itself, rendering it unable to respond to other connections.

The sequoia-openpgp crate 1.13.0 before 1.21.0 for Rust allows an infinite loop of "Reading a cert: Invalid operation: Not a Key packet" messages for RawCertParser operations that encounter an unsupported primary key type.

scapy 2.4.0 is affected by: Denial of Service. The impact is: infinite loop, resource consumption and program unresponsive. The component is: _RADIUSAttrPacketListField.getfield(self..). The attack vector is: over the network or in a pcap. both work.

Infinite loop while decoding compressed data can lead to overrun condition in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8096AU, APQ8098, MDM9150, MDM9205, MDM9206, MDM9607, MDM9615, MDM9625, MDM9635M, MDM9640, MDM9650, MDM9655, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8939, MSM8940, MSM8953, MSM8976, MSM8996AU, MSM8998, Nicobar, QCM2150, QCS605, QM215, SC8180X, SDA660, SDA845, SDM429, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX24, SDX55, SM6150, SM7150, SM8150, SM8250, Snapdragon_High_Med_2016, SXR1130, SXR2130

In Apache Thrift all versions up to and including 0.12.0, a server or client may run into an endless loop when feed with specific input data. Because the issue had already been partially fixed in version 0.11.0, depending on the installed version it affects only certain language bindings.

In Wireshark 2.2.0 to 2.2.12 and 2.4.0 to 2.4.4, the DMP dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-dmp.c by correctly supporting a bounded number of Security Categories for a DMP Security Classification.

In parseUriInternal of Intent.java, there is a possible infinite loop due to improper input validation. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.

Windows Standards-Based Storage Management Service Denial of Service Vulnerability

Junrar is an open source java RAR archive library. In affected versions A carefully crafted RAR archive can trigger an infinite loop while extracting said archive. The impact depends solely on how the application uses the library, and whether files can be provided by malignant users. The problem is patched in 7.4.1. There are no known workarounds and users are advised to upgrade as soon as possible.

Xerox VersaLink devices on specific versions of firmware before 2022-01-26 allow remote attackers to brick the device via a crafted TIFF file in an unauthenticated HTTP POST request. There is a permanent denial of service because image parsing causes a reboot, but image parsing is restarted as soon as the boot process finishes. However, this boot loop can be resolved by a field technician. The TIFF file must have an incomplete Image Directory. Affected firmware versions include xx.42.01 and xx.50.61. NOTE: the 2022-01-24 NeoSmart article included "believed to affect all previous and later versions as of the date of this posting" but a 2022-01-26 vendor statement reports "the latest versions of firmware are not vulnerable to this issue."

QEMU can have an infinite loop in hw/rdma/vmw/pvrdma_dev_ring.c because return values are not checked (and -1 is mishandled).

The html package (aka x/net/html) through 2018-09-25 in Go mishandles <table><math><select><mi><select></table>, leading to an infinite loop during an html.Parse call because inSelectIM and inSelectInTableIM do not comply with a specification.

A denial of service vulnerability exists in the parseNormalModeParameters functionality of MZ Automation GmbH libiec61850 1.5.0. A specially-crafted series of network requests can lead to denial of service. An attacker can send a sequence of malformed iec61850 messages to trigger this vulnerability.

An improper handing of overflow in the UTF-8 decoder with supplementary characters can lead to an infinite loop in the decoder causing a Denial of Service. Versions Affected: Apache Tomcat 9.0.0.M9 to 9.0.7, 8.5.0 to 8.5.30, 8.0.0.RC1 to 8.0.51, and 7.0.28 to 7.0.86.

The BN_mod_sqrt() function, which computes a modular square root, contains a bug that can cause it to loop forever for non-prime moduli. Internally this function is used when parsing certificates that contain elliptic curve public keys in compressed form or explicit elliptic curve parameters with a base point encoded in compressed form. It is possible to trigger the infinite loop by crafting a certificate that has invalid explicit curve parameters. Since certificate parsing happens prior to verification of the certificate signature, any process that parses an externally supplied certificate may thus be subject to a denial of service attack. The infinite loop can also be reached when parsing crafted private keys as they can contain explicit elliptic curve parameters. Thus vulnerable situations include: - TLS clients consuming server certificates - TLS servers consuming client certificates - Hosting providers taking certificates or private keys from customers - Certificate authorities parsing certification requests from subscribers - Anything else which parses ASN.1 elliptic curve parameters Also any other applications that use the BN_mod_sqrt() where the attacker can control the parameter values are vulnerable to this DoS issue. In the OpenSSL 1.0.2 version the public key is not parsed during initial parsing of the certificate which makes it slightly harder to trigger the infinite loop. However any operation which requires the public key from the certificate will trigger the infinite loop. In particular the attacker can use a self-signed certificate to trigger the loop during verification of the certificate signature. This issue affects OpenSSL versions 1.0.2, 1.1.1 and 3.0. It was addressed in the releases of 1.1.1n and 3.0.2 on the 15th March 2022. Fixed in OpenSSL 3.0.2 (Affected 3.0.0,3.0.1). Fixed in OpenSSL 1.1.1n (Affected 1.1.1-1.1.1m). Fixed in OpenSSL 1.0.2zd (Affected 1.0.2-1.0.2zc).

In libtirpc before 1.3.3rc1, remote attackers could exhaust the file descriptors of a process that uses libtirpc because idle TCP connections are mishandled. This can, in turn, lead to an svc_run infinite loop without accepting new connections.

TinyXML through 2.6.2 has an infinite loop in TiXmlParsingData::Stamp in tinyxmlparser.cpp via the TIXML_UTF_LEAD_0 case. It can be triggered by a crafted XML message and leads to a denial of service.

NLnet Labs Routinator prior to 0.10.2 happily processes a chain of RRDP repositories of infinite length causing it to never finish a validation run. In RPKI, a CA can choose the RRDP repository it wishes to publish its data in. By continuously generating a new child CA that only consists of another CA using a different RRDP repository, a malicious CA can create a chain of CAs of de-facto infinite length. Routinator prior to version 0.10.2 did not contain a limit on the length of such a chain and will therefore continue to process this chain forever. As a result, the validation run will never finish, leading to Routinator continuing to serve the old data set or, if in the initial validation run directly after starting, never serve any data at all.

An issue was discovered in MediaWiki through 1.36.2. A parser function related to loop control allowed for an infinite loop (and php-fpm hang) within the Loops extension because egLoopsCountLimit is mishandled. This could lead to memory exhaustion.

Crash in the RFC 7468 dissector in Wireshark 3.6.0 and 3.4.0 to 3.4.10 allows denial of service via packet injection or crafted capture file

XML External Entity vulnerability in libexpat 2.2.0 and earlier (Expat XML Parser Library) allows attackers to put the parser in an infinite loop using a malformed external entity definition from an external DTD.

Infinite loop in the BitTorrent DHT dissector in Wireshark 3.6.0 and 3.4.0 to 3.4.10 allows denial of service via packet injection or crafted capture file

The rencode package through 1.0.6 for Python allows an infinite loop in typecode decoding (such as via ;\x2f\x7f), enabling a remote attack that consumes CPU and memory.

Internally libssl in OpenSSL calls X509_verify_cert() on the client side to verify a certificate supplied by a server. That function may return a negative return value to indicate an internal error (for example out of memory). Such a negative return value is mishandled by OpenSSL and will cause an IO function (such as SSL_connect() or SSL_do_handshake()) to not indicate success and a subsequent call to SSL_get_error() to return the value SSL_ERROR_WANT_RETRY_VERIFY. This return value is only supposed to be returned by OpenSSL if the application has previously called SSL_CTX_set_cert_verify_callback(). Since most applications do not do this the SSL_ERROR_WANT_RETRY_VERIFY return value from SSL_get_error() will be totally unexpected and applications may not behave correctly as a result. The exact behaviour will depend on the application but it could result in crashes, infinite loops or other similar incorrect responses. This issue is made more serious in combination with a separate bug in OpenSSL 3.0 that will cause X509_verify_cert() to indicate an internal error when processing a certificate chain. This will occur where a certificate does not include the Subject Alternative Name extension but where a Certificate Authority has enforced name constraints. This issue can occur even with valid chains. By combining the two issues an attacker could induce incorrect, application dependent behaviour. Fixed in OpenSSL 3.0.1 (Affected 3.0.0).

An issue was discovered in the DNS proxy in Connman through 1.40. The TCP server reply implementation has an infinite loop if no data is received.

crypto/ahash.c in the Linux kernel through 4.10.9 allows attackers to cause a denial of service (API operation calling its own callback, and infinite recursion) by triggering EBUSY on a full queue.

In Contiki 3.0, a Telnet server that silently quits (before disconnection with clients) leads to connected clients entering an infinite loop and waiting forever, which may cause excessive CPU consumption.

PDF Labs pdftk-java v3.2.3 was discovered to contain an infinite loop via the component /text/pdf/PdfReader.java.

An issue was discovered in the CentralAuth extension in MediaWiki through 1.36. The Special:GlobalRenameRequest page is vulnerable to infinite loops and denial of service attacks when a user's current username is beyond an arbitrary maximum configuration value (MaxNameChars).