A stack based buffer overflow vulnerability exists in the method receiving data from SysTreeView32 control of the GMER 2.1.19357 application. A specially created long path can lead to a buffer overflow on the stack resulting in code execution. An attacker needs to create path longer than 99 characters to trigger this vulnerability.

An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service ‘I/O-Check’ functionality of WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send a specially crafted packet to trigger the parsing of this cache file.The destination buffer sp+0x40 is overflowed with the call to sprintf() for any gateway values that are greater than 512-len(‘/etc/config-tools/config_default_gateway number=0 state=enabled value=‘) in length. A gateway value of length 0x7e2 will cause the service to crash.

An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service ‘I/O-Check’ functionality of WAGO PFC 200 Firmware version 03.02.02(14). The destination buffer sp+0x440 is overflowed with the call to sprintf() for any domainname values that are greater than 1024-len(‘/etc/config-tools/edit_dns_server domain-name=‘) in length. A domainname value of length 0x3fa will cause the service to crash.

IBM Informix Dynamic Server 12.10 and 14.10 archecker is vulnerable to a heap buffer overflow, caused by improper bounds checking which could allow a local user to cause a segmentation fault. IBM X-Force ID: 251204.

A heap-based buffer overflow in the vrend_renderer_transfer_write_iov function in vrend_renderer.c in virglrenderer through 0.8.0 allows guest OS users to cause a denial of service via VIRGL_CCMD_RESOURCE_INLINE_WRITE commands.

Eximious Logo Designer 3.82 has a User Mode Write AV starting at ExiCustomPathLib!ExiCustomPathLib::CGradientColorsProfile::BuildGradientColorsTable+0x0000000000000053.

Eximious Logo Designer 3.82 has Heap Corruption starting at ntdll!RtlpNtMakeTemporaryKey+0x0000000000001a78.

Eximious Logo Designer 3.82 has a User Mode Write AV starting at ExiVectorRender!StrokeText_Blend+0x00000000000003a7.

Out-of-bounds write in accessing uninitialized memory in libsavsvc.so prior to Android 15 allows local attackers to cause memory corruption.

The NHI card’s web service component has a stack-based buffer overflow vulnerability due to insufficient validation for network packet key parameter. A LAN attacker with general user privilege can exploit this vulnerability to disrupt service.

The NHI card’s web service component has a heap-based buffer overflow vulnerability due to insufficient validation for packet origin parameter length. A LAN attacker with general user privilege can exploit this vulnerability to disrupt service.

Buffer Overflow vulnerability found in Cesanta MJS v.1.26 allows a local attacker to cause a denial of service via the mjs_mk_string function in mjs.c.

A denial of service vulnerability was reported in Lenovo PCManager prior to version 4.0.20.10282 that could allow an attacker with local access to trigger a blue screen error.

Out-of-bounds write in firmware for some Intel(R) NUCs may allow an authenticated user to potentially enable denial of service via local access.

A “CWE-121: Stack-based Buffer Overflow” in the wd210std.dll dynamic library packaged with the ThermoscanIP installer allows a local attacker to possibly trigger a Denial-of-Service (DoS) condition on the target component.

In the Linux kernel, the following vulnerability has been resolved: igb: cope with large MAX_SKB_FRAGS Sabrina reports that the igb driver does not cope well with large MAX_SKB_FRAG values: setting MAX_SKB_FRAG to 45 causes payload corruption on TX. An easy reproducer is to run ssh to connect to the machine. With MAX_SKB_FRAGS=17 it works, with MAX_SKB_FRAGS=45 it fails. This has been reported originally in https://bugzilla.redhat.com/show_bug.cgi?id=2265320 The root cause of the issue is that the driver does not take into account properly the (possibly large) shared info size when selecting the ring layout, and will try to fit two packets inside the same 4K page even when the 1st fraglist will trump over the 2nd head. Address the issue by checking if 2K buffers are insufficient.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix slab-out-of-bounds in ext4_mb_find_good_group_avg_frag_lists() We can trigger a slab-out-of-bounds with the following commands: mkfs.ext4 -F /dev/$disk 10G mount /dev/$disk /tmp/test echo 2147483647 > /sys/fs/ext4/$disk/mb_group_prealloc echo test > /tmp/test/file && sync ================================================================== BUG: KASAN: slab-out-of-bounds in ext4_mb_find_good_group_avg_frag_lists+0x8a/0x200 [ext4] Read of size 8 at addr ffff888121b9d0f0 by task kworker/u2:0/11 CPU: 0 PID: 11 Comm: kworker/u2:0 Tainted: GL 6.7.0-next-20240118 #521 Call Trace: dump_stack_lvl+0x2c/0x50 kasan_report+0xb6/0xf0 ext4_mb_find_good_group_avg_frag_lists+0x8a/0x200 [ext4] ext4_mb_regular_allocator+0x19e9/0x2370 [ext4] ext4_mb_new_blocks+0x88a/0x1370 [ext4] ext4_ext_map_blocks+0x14f7/0x2390 [ext4] ext4_map_blocks+0x569/0xea0 [ext4] ext4_do_writepages+0x10f6/0x1bc0 [ext4] [...] ================================================================== The flow of issue triggering is as follows: // Set s_mb_group_prealloc to 2147483647 via sysfs ext4_mb_new_blocks ext4_mb_normalize_request ext4_mb_normalize_group_request ac->ac_g_ex.fe_len = EXT4_SB(sb)->s_mb_group_prealloc ext4_mb_regular_allocator ext4_mb_choose_next_group ext4_mb_choose_next_group_best_avail mb_avg_fragment_size_order order = fls(len) - 2 = 29 ext4_mb_find_good_group_avg_frag_lists frag_list = &sbi->s_mb_avg_fragment_size[order] if (list_empty(frag_list)) // Trigger SOOB! At 4k block size, the length of the s_mb_avg_fragment_size list is 14, but an oversized s_mb_group_prealloc is set, causing slab-out-of-bounds to be triggered by an attempt to access an element at index 29. Add a new attr_id attr_clusters_in_group with values in the range [0, sbi->s_clusters_per_group] and declare mb_group_prealloc as that type to fix the issue. In addition avoid returning an order from mb_avg_fragment_size_order() greater than MB_NUM_ORDERS(sb) and reduce some useless loops.

An out-of-bounds write issue was addressed with improved input validation. This issue is fixed in macOS Sonoma 14.6. An app may be able to cause a coprocessor crash.

In the Linux kernel, the following vulnerability has been resolved: igc: avoid returning frame twice in XDP_REDIRECT When a frame can not be transmitted in XDP_REDIRECT (e.g. due to a full queue), it is necessary to free it by calling xdp_return_frame_rx_napi. However, this is the responsibility of the caller of the ndo_xdp_xmit (see for example bq_xmit_all in kernel/bpf/devmap.c) and thus calling it inside igc_xdp_xmit (which is the ndo_xdp_xmit of the igc driver) as well will lead to memory corruption. In fact, bq_xmit_all expects that it can return all frames after the last successfully transmitted one. Therefore, break for the first not transmitted frame, but do not call xdp_return_frame_rx_napi in igc_xdp_xmit. This is equally implemented in other Intel drivers such as the igb. There are two alternatives to this that were rejected: 1. Return num_frames as all the frames would have been transmitted and release them inside igc_xdp_xmit. While it might work technically, it is not what the return value is meant to represent (i.e. the number of SUCCESSFULLY transmitted packets). 2. Rework kernel/bpf/devmap.c and all drivers to support non-consecutively dropped packets. Besides being complex, it likely has a negative performance impact without a significant gain since it is anyway unlikely that the next frame can be transmitted if the previous one was dropped. The memory corruption can be reproduced with the following script which leads to a kernel panic after a few seconds. It basically generates more traffic than a i225 NIC can transmit and pushes it via XDP_REDIRECT from a virtual interface to the physical interface where frames get dropped. #!/bin/bash INTERFACE=enp4s0 INTERFACE_IDX=`cat /sys/class/net/$INTERFACE/ifindex` sudo ip link add dev veth1 type veth peer name veth2 sudo ip link set up $INTERFACE sudo ip link set up veth1 sudo ip link set up veth2 cat << EOF > redirect.bpf.c SEC("prog") int redirect(struct xdp_md *ctx) { return bpf_redirect($INTERFACE_IDX, 0); } char _license[] SEC("license") = "GPL"; EOF clang -O2 -g -Wall -target bpf -c redirect.bpf.c -o redirect.bpf.o sudo ip link set veth2 xdp obj redirect.bpf.o cat << EOF > pass.bpf.c SEC("prog") int pass(struct xdp_md *ctx) { return XDP_PASS; } char _license[] SEC("license") = "GPL"; EOF clang -O2 -g -Wall -target bpf -c pass.bpf.c -o pass.bpf.o sudo ip link set $INTERFACE xdp obj pass.bpf.o cat << EOF > trafgen.cfg { /* Ethernet Header */ 0xe8, 0x6a, 0x64, 0x41, 0xbf, 0x46, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, const16(ETH_P_IP), /* IPv4 Header */ 0b01000101, 0, # IPv4 version, IHL, TOS const16(1028), # IPv4 total length (UDP length + 20 bytes (IP header)) const16(2), # IPv4 ident 0b01000000, 0, # IPv4 flags, fragmentation off 64, # IPv4 TTL 17, # Protocol UDP csumip(14, 33), # IPv4 checksum /* UDP Header */ 10, 0, 1, 1, # IP Src - adapt as needed 10, 0, 1, 2, # IP Dest - adapt as needed const16(6666), # UDP Src Port const16(6666), # UDP Dest Port const16(1008), # UDP length (UDP header 8 bytes + payload length) csumudp(14, 34), # UDP checksum /* Payload */ fill('W', 1000), } EOF sudo trafgen -i trafgen.cfg -b3000MB -o veth1 --cpp

In the Linux kernel, the following vulnerability has been resolved: Both cadence-quadspi ->runtime_suspend() and ->runtime_resume() implementations start with: struct cqspi_st *cqspi = dev_get_drvdata(dev); struct spi_controller *host = dev_get_drvdata(dev); This obviously cannot be correct, unless "struct cqspi_st" is the first member of " struct spi_controller", or the other way around, but it is not the case. "struct spi_controller" is allocated by devm_spi_alloc_host(), which allocates an extra amount of memory for private data, used to store "struct cqspi_st". The ->probe() function of the cadence-quadspi driver then sets the device drvdata to store the address of the "struct cqspi_st" structure. Therefore: struct cqspi_st *cqspi = dev_get_drvdata(dev); is correct, but: struct spi_controller *host = dev_get_drvdata(dev); is not, as it makes "host" point not to a "struct spi_controller" but to the same "struct cqspi_st" structure as above. This obviously leads to bad things (memory corruption, kernel crashes) directly during ->probe(), as ->probe() enables the device using PM runtime, leading the ->runtime_resume() hook being called, which in turns calls spi_controller_resume() with the wrong pointer. This has at least been reported [0] to cause a kernel crash, but the exact behavior will depend on the memory contents. [0] https://lore.kernel.org/all/20240226121803.5a7r5wkpbbowcxgx@dhruva/ This issue potentially affects all platforms that are currently using the cadence-quadspi driver.

In jpg driver, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service in kernel.

An issue in radare2 v5.8.0 through v5.9.4 allows a local attacker to cause a denial of service via the __bf_div function.

In the Linux kernel, the following vulnerability has been resolved: erofs: fix out-of-bound access when z_erofs_gbuf_growsize() partially fails If z_erofs_gbuf_growsize() partially fails on a global buffer due to memory allocation failure or fault injection (as reported by syzbot [1]), new pages need to be freed by comparing to the existing pages to avoid memory leaks. However, the old gbuf->pages[] array may not be large enough, which can lead to null-ptr-deref or out-of-bound access. Fix this by checking against gbuf->nrpages in advance. [1] https://lore.kernel.org/r/000000000000f7b96e062018c6e3@google.com

In the Linux kernel, the following vulnerability has been resolved: jfs: Fix shift-out-of-bounds in dbDiscardAG When searching for the next smaller log2 block, BLKSTOL2() returned 0, causing shift exponent -1 to be negative. This patch fixes the issue by exiting the loop directly when negative shift is found.

In the Linux kernel, the following vulnerability has been resolved: RDMA/restrack: Fix potential invalid address access struct rdma_restrack_entry's kern_name was set to KBUILD_MODNAME in ib_create_cq(), while if the module exited but forgot del this rdma_restrack_entry, it would cause a invalid address access in rdma_restrack_clean() when print the owner of this rdma_restrack_entry. These code is used to help find one forgotten PD release in one of the ULPs. But it is not needed anymore, so delete them.

Variant_encodeJson in open62541 1.x before 1.0.4 has an out-of-bounds write for a large recursion depth.

In the Linux kernel, the following vulnerability has been resolved: bnxt_en : Fix memory out-of-bounds in bnxt_fill_hw_rss_tbl() A recent commit has modified the code in __bnxt_reserve_rings() to set the default RSS indirection table to default only when the number of RX rings is changing. While this works for newer firmware that requires RX ring reservations, it causes the regression on older firmware not requiring RX ring resrvations (BNXT_NEW_RM() returns false). With older firmware, RX ring reservations are not required and so hw_resc->resv_rx_rings is not always set to the proper value. The comparison: if (old_rx_rings != bp->hw_resc.resv_rx_rings) in __bnxt_reserve_rings() may be false even when the RX rings are changing. This will cause __bnxt_reserve_rings() to skip setting the default RSS indirection table to default to match the current number of RX rings. This may later cause bnxt_fill_hw_rss_tbl() to use an out-of-range index. We already have bnxt_check_rss_tbl_no_rmgr() to handle exactly this scenario. We just need to move it up in bnxt_need_reserve_rings() to be called unconditionally when using older firmware. Without the fix, if the TX rings are changing, we'll skip the bnxt_check_rss_tbl_no_rmgr() call and __bnxt_reserve_rings() may also skip the bnxt_set_dflt_rss_indir_tbl() call for the reason explained in the last paragraph. Without setting the default RSS indirection table to default, it causes the regression: BUG: KASAN: slab-out-of-bounds in __bnxt_hwrm_vnic_set_rss+0xb79/0xe40 Read of size 2 at addr ffff8881c5809618 by task ethtool/31525 Call Trace: __bnxt_hwrm_vnic_set_rss+0xb79/0xe40 bnxt_hwrm_vnic_rss_cfg_p5+0xf7/0x460 __bnxt_setup_vnic_p5+0x12e/0x270 __bnxt_open_nic+0x2262/0x2f30 bnxt_open_nic+0x5d/0xf0 ethnl_set_channels+0x5d4/0xb30 ethnl_default_set_doit+0x2f1/0x620

In the Linux kernel, the following vulnerability has been resolved: net/sched: taprio: proper TCA_TAPRIO_TC_ENTRY_INDEX check taprio_parse_tc_entry() is not correctly checking TCA_TAPRIO_TC_ENTRY_INDEX attribute: int tc; // Signed value tc = nla_get_u32(tb[TCA_TAPRIO_TC_ENTRY_INDEX]); if (tc >= TC_QOPT_MAX_QUEUE) { NL_SET_ERR_MSG_MOD(extack, "TC entry index out of range"); return -ERANGE; } syzbot reported that it could fed arbitary negative values: UBSAN: shift-out-of-bounds in net/sched/sch_taprio.c:1722:18 shift exponent -2147418108 is negative CPU: 0 PID: 5066 Comm: syz-executor367 Not tainted 6.8.0-rc7-syzkaller-00136-gc8a5c731fd12 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2e0 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:217 [inline] __ubsan_handle_shift_out_of_bounds+0x3c7/0x420 lib/ubsan.c:386 taprio_parse_tc_entry net/sched/sch_taprio.c:1722 [inline] taprio_parse_tc_entries net/sched/sch_taprio.c:1768 [inline] taprio_change+0xb87/0x57d0 net/sched/sch_taprio.c:1877 taprio_init+0x9da/0xc80 net/sched/sch_taprio.c:2134 qdisc_create+0x9d4/0x1190 net/sched/sch_api.c:1355 tc_modify_qdisc+0xa26/0x1e40 net/sched/sch_api.c:1776 rtnetlink_rcv_msg+0x885/0x1040 net/core/rtnetlink.c:6617 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367 netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7f1b2dea3759 Code: 48 83 c4 28 c3 e8 d7 19 00 00 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd4de452f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f1b2def0390 RCX: 00007f1b2dea3759 RDX: 0000000000000000 RSI: 00000000200007c0 RDI: 0000000000000004 RBP: 0000000000000003 R08: 0000555500000000 R09: 0000555500000000 R10: 0000555500000000 R11: 0000000000000246 R12: 00007ffd4de45340 R13: 00007ffd4de45310 R14: 0000000000000001 R15: 00007ffd4de45340