snappy-java is a fast compressor/decompressor for Java. Due to unchecked multiplications, an integer overflow may occur in versions prior to 1.1.10.1, causing a fatal error. The function `shuffle(int[] input)` in the file `BitShuffle.java` receives an array of integers and applies a bit shuffle on it. It does so by multiplying the length by 4 and passing it to the natively compiled shuffle function. Since the length is not tested, the multiplication by four can cause an integer overflow and become a smaller value than the true size, or even zero or negative. In the case of a negative value, a `java.lang.NegativeArraySizeException` exception will raise, which can crash the program. In a case of a value that is zero or too small, the code that afterwards references the shuffled array will assume a bigger size of the array, which might cause exceptions such as `java.lang.ArrayIndexOutOfBoundsException`. The same issue exists also when using the `shuffle` functions that receive a double, float, long and short, each using a different multiplier that may cause the same issue. Version 1.1.10.1 contains a patch for this vulnerability.

An exploitable denial-of-service vulnerability exists in the TXT record-parsing functionality of Videolabs libmicrodns 0.1.0. When parsing the RDATA section in a TXT record in mDNS messages, multiple integer overflows can be triggered, leading to a denial of service. An attacker can send an mDNS message to trigger this vulnerability.

An integer overflow in eProsima Fast-DDS v3.3 allows attackers to cause a Denial of Service (DoS) via a crafted input.

An Integer Overflow exists in WebKit in Google Chrome before Blink M11 in the macOS WebCore::GraphicsContext::fillRect function.

eProsima Fast-DDS v3.3 and before has an infinite loop vulnerability caused by integer overflow in the Time_t:: fraction() function.

Integer overflow vulnerability in the yuv2ya16_X_c_template function in libswscale/output.c in FFmpeg 8.0.

eprosima Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group). Prior to 2.6.11, 2.14.6, 3.2.4, 3.3.1, and 3.4.1, when the security mode is enabled, modifying the DATA Submessage within an SPDP packet sent by a publisher causes an Out-Of-Memory (OOM) condition, resulting in remote termination of Fast-DDS. If the fields of PID_IDENTITY_TOKEN or PID_PERMISSION_TOKEN in the DATA Submessage — specifically by tampering with the length field in readPropertySeq — are modified, an integer overflow occurs, leading to an OOM during the resize operation. This vulnerability is fixed in 2.6.11, 2.14.6, 3.2.4, 3.3.1, and 3.4.1.

ImageMagick is an open source software suite for displaying, converting, and editing raster image files. In ImageMagick versions prior to 7.1.2-7 and 6.9.13-32, an integer overflow vulnerability exists in the BMP decoder on 32-bit systems. The vulnerability occurs in coders/bmp.c when calculating the extent value by multiplying image columns by bits per pixel. On 32-bit systems with size_t of 4 bytes, a malicious BMP file with specific dimensions can cause this multiplication to overflow and wrap to zero. The overflow check added to address CVE-2025-57803 is placed after the overflow occurs, making it ineffective. A specially crafted 58-byte BMP file with width set to 536,870,912 and 32 bits per pixel can trigger this overflow, causing the bytes_per_line calculation to become zero. This vulnerability only affects 32-bit builds of ImageMagick where default resource limits for width, height, and area have been manually increased beyond their defaults. 64-bit systems with size_t of 8 bytes are not vulnerable, and systems using default ImageMagick resource limits are not vulnerable. The vulnerability is fixed in versions 7.1.2-7 and 6.9.13-32.

go-f3 is a Golang implementation of Fast Finality for Filecoin (F3). In versions 0.8.6 and below, go-f3 panics when it validates a "poison" messages causing Filecoin nodes consuming F3 messages to become vulnerable. A "poison" message can can cause integer overflow in the signer index validation, which can cause the whole node to crash. These malicious messages aren't self-propagating since the bug is in the validator. An attacker needs to directly send the message to all targets. This issue is fixed in version 0.8.7.

A flaw was found in how GLib’s GString manages memory when adding data to strings. If a string is already very large, combining it with more input can cause a hidden overflow in the size calculation. This makes the system think it has enough memory when it doesn’t. As a result, data may be written past the end of the allocated memory, leading to crashes or memory corruption.

pytorch v2.8.0 was discovered to display unexpected behavior when the components torch.rot90 and torch.randn_like are used together.

Unlimited memory allocation in redis protocol parser in Apache bRPC (all versions < 1.14.1) on all platforms allows attackers to crash the service via network. Root Cause: In the bRPC Redis protocol parser code, memory for arrays or strings of corresponding sizes is allocated based on the integers read from the network. If the integer read from the network is too large, it may cause a bad alloc error and lead to the program crashing. Attackers can exploit this feature by sending special data packets to the bRPC service to carry out a denial-of-service attack on it. The bRPC 1.14.0 version tried to fix this issue by limited the memory allocation size, however, the limitation checking code is not well implemented that may cause integer overflow and evade such limitation. So the 1.14.0 version is also vulnerable, although the integer range that affect version 1.14.0 is different from that affect version < 1.14.0. Affected scenarios: Using bRPC as a Redis server to provide network services to untrusted clients, or using bRPC as a Redis client to call untrusted Redis services. How to Fix: we provide two methods, you can choose one of them: 1. Upgrade bRPC to version 1.14.1. 2. Apply this patch ( https://github.com/apache/brpc/pull/3050 ) manually. No matter you choose which method, you should note that the patch limits the maximum length of memory allocated for each time in the bRPC Redis parser. The default limit is 64M. If some of you redis request or response have a size larger than 64M, you might encounter error after upgrade. For such case, you can modify the gflag redis_max_allocation_size to set a larger limit.

An integer overflow in the RTPS protocol implementation of OpenDDS DDS before v3.33.0 allows attackers to cause a Denial of Service (DoS) via a crafted message.

For some unlikely configurations of multipart upload, an Integer Overflow vulnerability in Apache Tomcat could lead to a DoS via bypassing of size limits. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.8, from 10.1.0-M1 through 10.1.42, from 9.0.0.M1 through 9.0.106. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 through 8.5.100. Other, older, EOL versions may also be affected. Users are recommended to upgrade to version 11.0.9, 10.1.43 or 9.0.107, which fix the issue.

An integer overflow vulnerability exists in the WebSocket component of Mongoose 7.5 thru 7.17. By sending a specially crafted WebSocket request, an attacker can cause the application to crash. If downstream vendors integrate this component improperly, the issue may lead to a buffer overflow.

NTSC-CRT 2.2.1 has an integer overflow and out-of-bounds write in loadBMP in bmp_rw.c because a file's width, height, and BPP are not validated. NOTE: the vendor's perspective is "this main application was not intended to be a well tested program, it's just something to demonstrate it works and for the user to see how to integrate it into their own programs."

eprosima Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group). Prior to 2.6.11, 2.14.6, 3.2.4, 3.3.1, and 3.4.1, when the security mode is enabled, modifying the DATA Submessage within an SPDP packet sent by a publisher causes an Out-Of-Memory (OOM) condition, resulting in remote termination of Fast-DDS. If the fields of PID_IDENTITY_TOKEN or PID_PERMISSION_TOKEN in the DATA Submessage — specifically by tampering with the length field in readBinaryPropertySeq— are modified, an integer overflow occurs, leading to an OOM during the resize operation. This vulnerability is fixed in 2.6.11, 2.14.6, 3.2.4, 3.3.1, and 3.4.1.

iperf3 before 3.14 allows peers to cause an integer overflow and heap corruption via a crafted length field.

Windows Deployment Services Denial of Service Vulnerability

A vulnerability classified as critical has been found in libzvbi up to 0.2.43. This affects the function vbi_capture_sim_load_caption of the file src/io-sim.c. The manipulation leads to integer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 0.2.44 is able to address this issue. The identifier of the patch is ca1672134b3e2962cd392212c73f44f8f4cb489f. It is recommended to upgrade the affected component. The code maintainer was informed beforehand about the issues. She reacted very fast and highly professional.

snappy-java is a fast compressor/decompressor for Java. Due to unchecked multiplications, an integer overflow may occur in versions prior to 1.1.10.1, causing an unrecoverable fatal error. The function `compress(char[] input)` in the file `Snappy.java` receives an array of characters and compresses it. It does so by multiplying the length by 2 and passing it to the rawCompress` function. Since the length is not tested, the multiplication by two can cause an integer overflow and become negative. The rawCompress function then uses the received length and passes it to the natively compiled maxCompressedLength function, using the returned value to allocate a byte array. Since the maxCompressedLength function treats the length as an unsigned integer, it doesn’t care that it is negative, and it returns a valid value, which is casted to a signed integer by the Java engine. If the result is negative, a `java.lang.NegativeArraySizeException` exception will be raised while trying to allocate the array `buf`. On the other side, if the result is positive, the `buf` array will successfully be allocated, but its size might be too small to use for the compression, causing a fatal Access Violation error. The same issue exists also when using the `compress` functions that receive double, float, int, long and short, each using a different multiplier that may cause the same issue. The issue most likely won’t occur when using a byte array, since creating a byte array of size 0x80000000 (or any other negative value) is impossible in the first place. Version 1.1.10.1 contains a patch for this issue.

Integer overflow in GameMaker IDE below 2024.14.0 version can lead to can lead to application crashes through denial-of-service attacks (DoS). GameMaker users who use the network_create_server() function in their projects  are urged to update and recompile immediately.

An issue was discovered in p11-kit 0.21.1 through 0.23.21. Multiple integer overflows have been discovered in the array allocations in the p11-kit library and the p11-kit list command, where overflow checks are missing before calling realloc or calloc.

An issue was discovered in picoTCP 1.7.0. The code for creating an ICMPv6 echo replies doesn't check whether the ICMPv6 echo request packet's size is shorter than 8 bytes. If the size of the incoming ICMPv6 request packet is shorter than this, the operation that calculates the size of the ICMPv6 echo replies has an integer wrap around, leading to memory corruption and, eventually, Denial-of-Service in pico_icmp6_send_echoreply_not_frag in pico_icmp6.c.

An integer overflow vulnerability exists with the length of websocket frames received via a websocket connection. An attacker would use this flaw to cause a denial of service attack on an HTTP Server allowing websocket connections.

Eclipse Jetty provides a web server and servlet container. In versions 11.0.0 through 11.0.15, 10.0.0 through 10.0.15, and 9.0.0 through 9.4.52, an integer overflow in `MetaDataBuilder.checkSize` allows for HTTP/2 HPACK header values to exceed their size limit. `MetaDataBuilder.java` determines if a header name or value exceeds the size limit, and throws an exception if the limit is exceeded. However, when length is very large and huffman is true, the multiplication by 4 in line 295 will overflow, and length will become negative. `(_size+length)` will now be negative, and the check on line 296 will not be triggered. Furthermore, `MetaDataBuilder.checkSize` allows for user-entered HPACK header value sizes to be negative, potentially leading to a very large buffer allocation later on when the user-entered size is multiplied by 2. This means that if a user provides a negative length value (or, more precisely, a length value which, when multiplied by the 4/3 fudge factor, is negative), and this length value is a very large positive number when multiplied by 2, then the user can cause a very large buffer to be allocated on the server. Users of HTTP/2 can be impacted by a remote denial of service attack. The issue has been fixed in versions 11.0.16, 10.0.16, and 9.4.53. There are no known workarounds.

TensorFlow is an end-to-end open source platform for machine learning. `array_ops.upper_bound` causes a segfault when not given a rank 2 tensor. The fix will be included in TensorFlow 2.13 and will also cherrypick this commit on TensorFlow 2.12.

There is an integer overflow vulnerability in LDAP server of some Huawei products. Due to insufficient input validation, a remote attacker could exploit this vulnerability by sending malformed packets to the target devices. Successful exploit could cause the affected system crash.

Vyper is a Pythonic smart contract language for the Ethereum virtual machine. Prior to version 0.3.8, due to missing overflow check for loop variables, by assigning the iterator of a loop to a variable, it is possible to overflow the type of the latter. The issue seems to happen only in loops of type `for i in range(a, a + N)` as in loops of type `for i in range(start, stop)` and `for i in range(stop)`, the compiler is able to raise a `TypeMismatch` when trying to overflow the variable. The problem has been patched in version 0.3.8.

A set of carefully crafted ipv6 packets can trigger an integer overflow in the calculation of a fragment reassembled packet's payload length field. This allows an attacker to trigger a kernel panic, resulting in a denial of service.

Altran picoTCP through 1.7.0 allows memory corruption (and subsequent denial of service) because of an integer overflow in pico_ipv6_alloc when processing large ICMPv6 packets. This affects installations with Ethernet support in which a packet size greater than 65495 may occur.

Transient DOS in Bluetooth Host while rfc slot allocation.

An issue was discovered in the http crate before 0.1.20 for Rust. An integer overflow in HeaderMap::reserve() could result in denial of service (e.g., an infinite loop).

The OPC UA implementations (ANSI C and C++) in affected products contain an integer overflow vulnerability that could cause the application to run into an infinite loop during certificate validation. This could allow an unauthenticated remote attacker to create a denial of service condition by sending a specially crafted certificate.

A vulnerability has been identified in SPPA-T3000 MS3000 Migration Server (All versions). An attacker with network access to the MS3000 Server can trigger a Denial-of-Service condition by sending specifically crafted packets to port 5010/tcp. This vulnerability is independent from CVE-2019-18290, CVE-2019-18291, CVE-2019-18292, CVE-2019-18294, CVE-2019-18298, CVE-2019-18299, CVE-2019-18300, CVE-2019-18301, CVE-2019-18302, CVE-2019-18303, CVE-2019-18305, CVE-2019-18306, and CVE-2019-18307. Please note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.

Kilo 0.0.1 has a heap-based buffer overflow because there is an integer overflow in a calculation involving the number of tabs in one row.

TensorFlow is an open source platform for machine learning. Prior to versions 2.12.0 and 2.11.1, integer overflow occurs when `2^31 <= num_frames * height * width * channels < 2^32`, for example Full HD screencast of at least 346 frames. A fix is included in TensorFlow version 2.12.0 and version 2.11.1.

Calling any of the Parse functions on Go source code which contains //line directives with very large line numbers can cause an infinite loop due to integer overflow.

Matrix SSL 4.x through 4.6.0 and Rambus TLS Toolkit have a length-subtraction integer overflow for Client Hello Pre-Shared Key extension parsing in the TLS 1.3 server. An attacked device calculates an SHA-2 hash over at least 65 KB (in RAM). With a large number of crafted TLS messages, the CPU becomes heavily loaded. This occurs in tls13VerifyBinder and tls13TranscriptHashUpdate.

TensorFlow is an open source platform for machine learning. Versions prior to 2.12.0 and 2.11.1 are vulnerable to integer overflow in EditDistance. A fix is included in TensorFlow version 2.12.0 and version 2.11.1.

The Rockwell Automation Thinmanager Thinserver is impacted by an improper input validation vulnerability, an integer overflow condition exists in the affected products. When the ThinManager processes incoming messages, a read access violation occurs and terminates the process. A malicious user could exploit this vulnerability by sending a crafted synchronization protocol message and causing a denial of service condition in the software.

Integer Overflow vulnerability in Mbed TLS 2.x before 2.28.7 and 3.x before 3.5.2, allows attackers to cause a denial of service (DoS) via mbedtls_x509_set_extension().

Bitcoin Core 0.13.0 through 29.x has an integer overflow.

Buffer Overflow vulnerability in Antirez Kilo before commit 7709a04ae8520c5b04d261616098cebf742f5a23 allows a remote attacker to cause a denial of service via the editorUpdateRow function in kilo.c.

An Integer Overflow vulnerability in WLInfoRailService component of Ivanti Avalanche before 6.4.3 allows an unauthenticated remote attacker to perform denial of service attacks. In certain rare conditions this could also lead to reading content from memory.

On High-End SRX Series devices, in specific configurations and when specific networking events or operator actions occur, an SPC receiving genuine multicast traffic may core. Subsequently, all FPCs in a chassis may reset causing a Denial of Service. This issue affects both IPv4 and IPv6. This issue affects: Juniper Networks Junos OS 12.3X48 version 12.3X48-D80 and later versions prior to 12.3X48-D95 on High-End SRX Series. This issue does not affect Branch SRX Series devices.

An issue was discovered in picoTCP 1.7.0. The code for parsing the hop-by-hop IPv6 extension headers does not validate the bounds of the extension header length value, which may result in Integer Wraparound. Therefore, a crafted extension header length value may cause Denial-of-Service because it affects the loop in which the extension headers are parsed in pico_ipv6_process_hopbyhop() in pico_ipv6.c.

A vulnerability has been identified in SPPA-T3000 MS3000 Migration Server (All versions). An attacker with network access to the MS3000 Server can trigger a Denial-of-Service condition by sending specifically crafted packets to port 5010/tcp. This vulnerability is independent from CVE-2019-18290, CVE-2019-18291, CVE-2019-18292, CVE-2019-18294, CVE-2019-18298, CVE-2019-18299, CVE-2019-18300, CVE-2019-18301, CVE-2019-18302, CVE-2019-18304, CVE-2019-18305, CVE-2019-18306, and CVE-2019-18307. Please note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.