joserfc is a Python library that provides an implementation of several JSON Object Signing and Encryption (JOSE) standards. In versions from 1.3.3 to before 1.3.5 and from 1.4.0 to before 1.4.2, the ExceededSizeError exception messages are embedded with non-decoded JWT token parts and may cause Python logging to record an arbitrarily large, forged JWT payload. In situations where a misconfigured — or entirely absent — production-grade web server sits in front of a Python web application, an attacker may be able to send arbitrarily large bearer tokens in the HTTP request headers. When this occurs, Python logging or diagnostic tools (e.g., Sentry) may end up processing extremely large log messages containing the full JWT header during the joserfc.jwt.decode() operation. The same behavior also appears when validating claims and signature payload sizes, as the library raises joserfc.errors.ExceededSizeError() with the full payload embedded in the exception message. Since the payload is already fully loaded into memory at this stage, the library cannot prevent or reject it. This issue has been patched in versions 1.3.5 and 1.4.2.

sha256crypt and sha512crypt through 0.6 allow attackers to cause a denial of service (CPU consumption) because the algorithm's runtime is proportional to the square of the length of the password.

Frigate 2.02 contains a denial of service vulnerability that allows attackers to crash the application by sending oversized input to the command line interface. Attackers can generate a payload of 8000 repeated characters and paste it into the application's command line field to trigger an application crash.

When reading a specially crafted TAR archive, Compress can be made to allocate large amounts of memory that finally leads to an out of memory error even for very small inputs. This could be used to mount a denial of service attack against services that use Compress' tar package.

Allocation of Resources Without Limits or Throttling vulnerability in Hitachi Ops Center Common Services on Linux allows DoS.This issue affects Hitachi Ops Center Common Services: before 10.9.3-00.

go-libp2p is the Go implementation of the libp2p Networking Stack. Prior to versions 0.27.8, 0.28.2, and 0.29.1 malicious peer can use large RSA keys to run a resource exhaustion attack & force a node to spend time doing signature verification of the large key. This vulnerability is present in the core/crypto module of go-libp2p and can occur during the Noise handshake and the libp2p x509 extension verification step. To prevent this attack, go-libp2p versions 0.27.8, 0.28.2, and 0.29.1 restrict RSA keys to <= 8192 bits. To protect one's application, it is necessary to update to these patch releases and to use the updated Go compiler in 1.20.7 or 1.19.12. There are no known workarounds for this issue.

QUIC connections do not set an upper bound on the amount of data buffered when reading post-handshake messages, allowing a malicious QUIC connection to cause unbounded memory growth. With fix, connections now consistently reject messages larger than 65KiB in size.

A vulnerability in the email scanning algorithm of Cisco AsyncOS software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to perform a denial of service (DoS) attack against an affected device. This vulnerability is due to insufficient input validation of incoming emails. An attacker could exploit this vulnerability by sending a crafted email through Cisco ESA. A successful exploit could allow the attacker to exhaust all the available CPU resources on an affected device for an extended period of time, preventing other emails from being processed and resulting in a DoS condition.

A malicious HTTP/2 client which rapidly creates requests and immediately resets them can cause excessive server resource consumption. While the total number of requests is bounded by the http2.Server.MaxConcurrentStreams setting, resetting an in-progress request allows the attacker to create a new request while the existing one is still executing. With the fix applied, HTTP/2 servers now bound the number of simultaneously executing handler goroutines to the stream concurrency limit (MaxConcurrentStreams). New requests arriving when at the limit (which can only happen after the client has reset an existing, in-flight request) will be queued until a handler exits. If the request queue grows too large, the server will terminate the connection. This issue is also fixed in golang.org/x/net/http2 for users manually configuring HTTP/2. The default stream concurrency limit is 250 streams (requests) per HTTP/2 connection. This value may be adjusted using the golang.org/x/net/http2 package; see the Server.MaxConcurrentStreams setting and the ConfigureServer function.

On Crestron 3-Series Control Systems before 1.8001.0187, crafting and sending a specific BACnet packet can cause a crash.

Discourse is an open source discussion platform. Prior to version 3.0.6 of the `stable` branch and version 3.1.0.beta7 of the `beta` and `tests-passed` branches, in multiple controller actions, Discourse accepts limit params but does not impose any upper bound on the values being accepted. Without an upper bound, the software may allow arbitrary users to generate DB queries which may end up exhausting the resources on the server. The issue is patched in version 3.0.6 of the `stable` branch and version 3.1.0.beta7 of the `beta` and `tests-passed` branches. There are no known workarounds for this vulnerability.

Faktory is a language-agnostic persistent background job server. Prior to version 1.8.0, the Faktory web dashboard can suffer from denial of service by a crafted malicious url query param `days`. The vulnerability is related to how the backend reads the `days` URL query parameter in the Faktory web dashboard. The value is used directly without any checks to create a string slice. If a very large value is provided, the backend server ends up using a significant amount of memory and causing it to crash. Version 1.8.0 fixes this issue.

An issue in the BLOBcmp component of MonetDB Server v11.45.17 and v11.46.0 allows attackers to cause a Denial of Service (DoS) via crafted SQL statements.

An issue in the cs_bind_ubat component of MonetDB Server v11.45.17 and v11.46.0 allows attackers to cause a Denial of Service (DoS) via crafted SQL statements.

An issue in the log_create_delta component of MonetDB Server v11.45.17 and v11.46.0 allows attackers to cause Denial of Service (DoS) via crafted SQL statements.

snappy-java is a fast compressor/decompressor for Java. Due to use of an unchecked chunk length, an unrecoverable fatal error can occur in versions prior to 1.1.10.1. The code in the function hasNextChunk in the fileSnappyInputStream.java checks if a given stream has more chunks to read. It does that by attempting to read 4 bytes. If it wasn’t possible to read the 4 bytes, the function returns false. Otherwise, if 4 bytes were available, the code treats them as the length of the next chunk. In the case that the `compressed` variable is null, a byte array is allocated with the size given by the input data. Since the code doesn’t test the legality of the `chunkSize` variable, it is possible to pass a negative number (such as 0xFFFFFFFF which is -1), which will cause the code to raise a `java.lang.NegativeArraySizeException` exception. A worse case would happen when passing a huge positive value (such as 0x7FFFFFFF), which would raise the fatal `java.lang.OutOfMemoryError` error. Version 1.1.10.1 contains a patch for this issue.

Allocation of Resources Without Limits or Throttling vulnerability in Apache Software Foundation Apache Struts.This issue affects Apache Struts: through 2.5.30, through 6.1.2. Upgrade to Struts 2.5.31 or 6.1.2.1 or greater

gRPC contains a vulnerability that allows hpack table accounting errors could lead to unwanted disconnects between clients and servers in exceptional cases/ Three vectors were found that allow the following DOS attacks: - Unbounded memory buffering in the HPACK parser - Unbounded CPU consumption in the HPACK parser The unbounded CPU consumption is down to a copy that occurred per-input-block in the parser, and because that could be unbounded due to the memory copy bug we end up with an O(n^2) parsing loop, with n selected by the client. The unbounded memory buffering bugs: - The header size limit check was behind the string reading code, so we needed to first buffer up to a 4 gigabyte string before rejecting it as longer than 8 or 16kb. - HPACK varints have an encoding quirk whereby an infinite number of 0’s can be added at the start of an integer. gRPC’s hpack parser needed to read all of them before concluding a parse. - gRPC’s metadata overflow check was performed per frame, so that the following sequence of frames could cause infinite buffering: HEADERS: containing a: 1 CONTINUATION: containing a: 2 CONTINUATION: containing a: 3 etc…

Vulnerability of system restart triggered by abnormal callbacks passed to APIs.Successful exploitation of this vulnerability may cause the system to restart.

A flaw was found in EAP-7 during deserialization of certain classes, which permits instantiation of HashMap and HashTable with no checks on resources consumed. This issue could allow an attacker to submit malicious requests using these classes, which could eventually exhaust the heap and result in a Denial of Service.

TiKV 6.1.2 allows remote attackers to cause a denial of service (fatal error, with RpcStatus UNAVAILABLE for "not leader") upon an attempt to start a node in a situation where the context deadline is exceeded

Rekor is an open source software supply chain transparency log. Rekor prior to version 1.1.1 may crash due to out of memory (OOM) conditions caused by reading archive metadata files into memory without checking their sizes first. Verification of a JAR file submitted to Rekor can cause an out of memory crash if files within the META-INF directory of the JAR are sufficiently large. Parsing of an APK file submitted to Rekor can cause an out of memory crash if the .SIGN or .PKGINFO files within the APK are sufficiently large. The OOM crash has been patched in Rekor version 1.1.1. There are no known workarounds.

`silverstripe/graphql` serves Silverstripe data as GraphQL representations. In versions 4.2.2 and 4.1.1, an attacker could use a specially crafted graphql query to execute a denial of service attack against a website which has a publicly exposed graphql endpoint. This mostly affects websites with particularly large/complex graphql schemas. Users should upgrade to `silverstripe/graphql` 4.2.3 or 4.1.2 to remedy the vulnerability.

Every `named` instance configured to run as a recursive resolver maintains a cache database holding the responses to the queries it has recently sent to authoritative servers. The size limit for that cache database can be configured using the `max-cache-size` statement in the configuration file; it defaults to 90% of the total amount of memory available on the host. When the size of the cache reaches 7/8 of the configured limit, a cache-cleaning algorithm starts to remove expired and/or least-recently used RRsets from the cache, to keep memory use below the configured limit. It has been discovered that the effectiveness of the cache-cleaning algorithm used in `named` can be severely diminished by querying the resolver for specific RRsets in a certain order, effectively allowing the configured `max-cache-size` limit to be significantly exceeded. This issue affects BIND 9 versions 9.11.0 through 9.16.41, 9.18.0 through 9.18.15, 9.19.0 through 9.19.13, 9.11.3-S1 through 9.16.41-S1, and 9.18.11-S1 through 9.18.15-S1.

Trustwave ModSecurity 3.0.5 through 3.0.8 before 3.0.9 allows a denial of service (worker crash and unresponsiveness) because some inputs cause a segfault in the Transaction class for some configurations.

Etherpad < 1.8.3 is affected by a missing lock check which could cause a denial of service. Aggressively targeting random pad import endpoints with empty data would flatten all pads due to lack of rate limiting and missing ownership check.

An issue was discovered in hyper v0.13.7. h2-0.2.4 Stream stacking occurs when the H2 component processes HTTP2 RST_STREAM frames. As a result, the memory and CPU usage are high which can lead to a Denial of Service (DoS).

IBM Watson CP4D Data Stores 4.6.0 does not properly allocate resources without limits or throttling which could allow a remote attacker with information specific to the system to cause a denial of service. IBM X-Force ID: 248924.

An issue found in POWERAMP 925-bundle-play and Poweramp 954-uni allows a remote attacker to cause a denial of service via the Rescan button in Queue and Select Folders button in Library

Jenkins 2.393 and earlier, LTS 2.375.3 and earlier uses the Apache Commons FileUpload library without specifying limits for the number of request parts introduced in version 1.5 for CVE-2023-24998 in hudson.util.MultipartFormDataParser, allowing attackers to trigger a denial of service.

@fastify/multipart is a Fastify plugin to parse the multipart content-type. Prior to versions 7.4.1 and 6.0.1, @fastify/multipart may experience denial of service due to a number of situations in which an unlimited number of parts are accepted. This includes the multipart body parser accepting an unlimited number of file parts, the multipart body parser accepting an unlimited number of field parts, and the multipart body parser accepting an unlimited number of empty parts as field parts. This is fixed in v7.4.1 (for Fastify v4.x) and v6.0.1 (for Fastify v3.x). There are no known workarounds.

In vm-superio before 0.1.1, the serial console FIFO can grow to unlimited memory usage when data is sent to the input source (i.e., standard input). This behavior cannot be reproduced from the guest side. When no rate limiting is in place, the host can be subject to memory pressure, impacting all other VMs running on the same host.

In WAGO I/O-Check Service in multiple products an unauthenticated remote attacker can send a specially crafted packet containing OS commands to provoke a denial of service.

Boxo, formerly known as go-libipfs, is a library for building IPFS applications and implementations. In versions 0.4.0 and 0.5.0, if an attacker is able allocate arbitrary many bytes in the Bitswap server, those allocations are lasting even if the connection is closed. This affects users accepting untrusted connections with the Bitswap server and also affects users using the old API stubs at `github.com/ipfs/go-libipfs/bitswap` because users then transitively import `github.com/ipfs/go-libipfs/bitswap/server`. Boxo versions 0.6.0 and 0.4.1 contain a patch for this issue. As a workaround, those who are using the stub object at `github.com/ipfs/go-libipfs/bitswap` not taking advantage of the features provided by the server can refactor their code to use the new split API that will allow them to run in a client only mode: `github.com/ipfs/go-libipfs/bitswap/client`.

Kiwi TCMS, an open source test management system, does not impose rate limits in versions prior to 12.0. This makes it easier to attempt denial-of-service attacks against the Password reset page. An attacker could potentially send a large number of emails if they know the email addresses of users in Kiwi TCMS. Additionally that may strain SMTP resources. Users should upgrade to v12.0 or later to receive a patch. As potential workarounds, users may install and configure a rate-limiting proxy in front of Kiwi TCMS and/or configure rate limits on their email server when possible.

hb-ot-layout-gsubgpos.hh in HarfBuzz through 6.0.0 allows attackers to trigger O(n^2) growth via consecutive marks during the process of looking back for base glyphs when attaching marks.

Apache Commons FileUpload before 1.5 does not limit the number of request parts to be processed resulting in the possibility of an attacker triggering a DoS with a malicious upload or series of uploads. Note that, like all of the file upload limits, the new configuration option (FileUploadBase#setFileCountMax) is not enabled by default and must be explicitly configured.

Multipart form parsing can consume large amounts of CPU and memory when processing form inputs containing very large numbers of parts. This stems from several causes: 1. mime/multipart.Reader.ReadForm limits the total memory a parsed multipart form can consume. ReadForm can undercount the amount of memory consumed, leading it to accept larger inputs than intended. 2. Limiting total memory does not account for increased pressure on the garbage collector from large numbers of small allocations in forms with many parts. 3. ReadForm can allocate a large number of short-lived buffers, further increasing pressure on the garbage collector. The combination of these factors can permit an attacker to cause an program that parses multipart forms to consume large amounts of CPU and memory, potentially resulting in a denial of service. This affects programs that use mime/multipart.Reader.ReadForm, as well as form parsing in the net/http package with the Request methods FormFile, FormValue, ParseMultipartForm, and PostFormValue. With fix, ReadForm now does a better job of estimating the memory consumption of parsed forms, and performs many fewer short-lived allocations. In addition, the fixed mime/multipart.Reader imposes the following limits on the size of parsed forms: 1. Forms parsed with ReadForm may contain no more than 1000 parts. This limit may be adjusted with the environment variable GODEBUG=multipartmaxparts=. 2. Form parts parsed with NextPart and NextRawPart may contain no more than 10,000 header fields. In addition, forms parsed with ReadForm may contain no more than 10,000 header fields across all parts. This limit may be adjusted with the environment variable GODEBUG=multipartmaxheaders=.

Multiple vulnerabilities in the Cisco ATA 190 Series Analog Telephone Adapter Software could allow an attacker to perform a command injection attack resulting in remote code execution or cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Kiwi TCMS, an open source test management system, does not impose rate limits in versions prior to 12.0. This makes it easier to attempt brute-force attacks against the login page. Users should upgrade to v12.0 or later to receive a patch. As a workaround, users may install and configure a rate-limiting proxy in front of Kiwi TCMS.

The Zone Controller service in the Zoom On-Premise Meeting Connector Controller before version 4.6.358.20210205 does not verify the cnt field sent in incoming network packets, which leads to exhaustion of resources and system crash.

Allocation of Resources Without Limits or Throttling vulnerability in Apache Tomcat. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.7, from 10.1.0-M1 through 10.1.41, from 9.0.0.M1 through 9.0.105. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions may also be affected. Users are recommended to upgrade to version 11.0.8, 10.1.42 or 9.0.106, which fix the issue.

In doInBackground of NotificationContentInflater.java, there is a possible temporary denial or service due to long running operations. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11 Android-12 Android-12L Android-13Android ID: A-252766417

Authlib is a Python library which builds OAuth and OpenID Connect servers. Prior to version 1.6.5, Authlib’s JOSE implementation accepts unbounded JWS/JWT header and signature segments. A remote attacker can craft a token whose base64url‑encoded header or signature spans hundreds of megabytes. During verification, Authlib decodes and parses the full input before it is rejected, driving CPU and memory consumption to hostile levels and enabling denial of service. Version 1.6.5 patches the issue. Some temporary workarounds are available. Enforce input size limits before handing tokens to Authlib and/or use application-level throttling to reduce amplification risk.

A vulnerability in a logging API in Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to cause the device to become unresponsive or trigger an unexpected reload. This vulnerability could also allow an attacker with valid user credentials, but not Administrator privileges, to view a system log file that they would not normally have access to. This vulnerability is due to a lack of rate-limiting of requests that are sent to a specific API that is related to an FMC log. An attacker could exploit this vulnerability by sending a high rate of HTTP requests to the API. A successful exploit could allow the attacker to cause a denial of service (DoS) condition due to the FMC CPU spiking to 100 percent utilization or to the device reloading. CPU utilization would return to normal if the attack traffic was stopped before an unexpected reload was triggered.

A flaw was found in the way NSS handled CCS (ChangeCipherSpec) messages in TLS 1.3. This flaw allows a remote attacker to send multiple CCS messages, causing a denial of service for servers compiled with the NSS library. The highest threat from this vulnerability is to system availability. This flaw affects NSS versions before 3.58.

Rack is a modular Ruby web server interface. Prior to versions 2.2.14, 3.0.16, and 3.1.14, `Rack::QueryParser` parses query strings and `application/x-www-form-urlencoded` bodies into Ruby data structures without imposing any limit on the number of parameters, allowing attackers to send requests with extremely large numbers of parameters. The vulnerability arises because `Rack::QueryParser` iterates over each `&`-separated key-value pair and adds it to a Hash without enforcing an upper bound on the total number of parameters. This allows an attacker to send a single request containing hundreds of thousands (or more) of parameters, which consumes excessive memory and CPU during parsing. An attacker can trigger denial of service by sending specifically crafted HTTP requests, which can cause memory exhaustion or pin CPU resources, stalling or crashing the Rack server. This results in full service disruption until the affected worker is restarted. Versions 2.2.14, 3.0.16, and 3.1.14 fix the issue. Some other mitigations are available. One may use middleware to enforce a maximum query string size or parameter count, or employ a reverse proxy (such as Nginx) to limit request sizes and reject oversized query strings or bodies. Limiting request body sizes and query string lengths at the web server or CDN level is an effective mitigation.

VerneMQ MQTT Broker versions prior to 1.12.0 are vulnerable to a denial of service attack as a result of excessive memory consumption due to the handling of untrusted inputs. These inputs cause the message broker to consume large amounts of memory, resulting in the application being terminated by the operating system.

Suricata is a network IDS, IPS and NSM engine. Prior to versions 8.0.3 and 7.0.14, crafted DCERPC traffic can cause Suricata to expand a buffer w/o limits, leading to memory exhaustion and the process getting killed. While reported for DCERPC over UDP, it is believed that DCERPC over TCP and SMB are also vulnerable. DCERPC/TCP in the default configuration should not be vulnerable as the default stream depth is limited to 1MiB. Versions 8.0.3 and 7.0.14 contain a patch. Some workarounds are available. For DCERPC/UDP, disable the parser. For DCERPC/TCP, the `stream.reassembly.depth` setting will limit the amount of data that can be buffered. For DCERPC/SMB, the `stream.reassembly.depth` can be used as well, but is set to unlimited by default. Imposing a limit here may lead to loss of visibility in SMB.

In Netgear RAX30 V1.0.10.94_3, the USERLIMIT_GLOBAL option is set to 0 in multiple bftpd-related configuration files. This can cause DoS attacks when unlimited users are connected.