In Apache Iceberg, the table's metadata files are control files: they tell readers which data files belong to the table and which table version to read. `write.metadata.path` is an optional table property that tells Polaris where to write those metadata files. For a table already registered in a Polaris-managed catalog, changing only that property through an `ALTER TABLE`-style settings change (not a row-level `INSERT`, `SELECT`, `UPDATE`, or `DELETE`) bypasses the commit-time branch that is supposed to revalidate storage locations. The full persisted / credential-vending variant requires the affected catalog to have `polaris.config.allow.unstructured.table.location=true`, with `allowedLocations` broad enough to include the attacker-chosen target. `allowedLocations` is the admin-configured allowlist of storage paths that the catalog is allowed to use. Public project materials suggest that this flag is a real supported compatibility / layout mode, not just a contrived lab-only prerequisite. In that configuration, a user who can change table settings can cause Apache Polaris itself to write new table metadata to an attacker-chosen reachable storage location before the intended location-validation branch runs. If the later concrete-path validation also accepts that location, Polaris persists the resulting metadata path into stored table state. Later table-load and credential APIs can then return temporary cloud-storage credentials for the same location without revalidating it. In plain terms, Polaris can later hand out temporary storage access for the same attacker-chosen area. That attacker-chosen area does not need to be limited to the poisoned table's own files. If it is a broader storage prefix, another table's prefix, or, depending on configuration or provider behavior, even a bucket/container root, the resulting disclosure or corruption scope can extend to any data and metadata Polaris can reach there. The practical consequences are therefore similar to the staged-create credential-vending issue already discussed: data and metadata reachable in that storage scope can be exposed and, if write-capable credentials are later issued, modified, corrupted, or removed. Even before that later credential step, Polaris itself performs the metadata write to the unchecked location. So the core issue is not only later credential vending. The primary defect is that Polaris skips its intended location checks before performing a security- sensitive metadata write when only `write.metadata.path` changes. When `polaris.config.allow.unstructured.table.location=false`, current code review suggests the later `updateTableLike(...)` validation usually rejects out-of-tree metadata locations before the unsafe path is persisted. That may reduce the persisted / credential-vending variant, but it does not prevent the underlying defect: Polaris still skips the intended pre-write location check when only `write.metadata.path` changes.

Apache Polaris can issue broad temporary ("vended") storage credentials during staged table creation before the effective table location has been validated or durably reserved. Those temporary credentials are meant to limit the scope of accessible table data and metadata, but this scope limitation becomes attacker- directed because the attacker can choose a reachable target location. In the confirmed variant, if the caller supplies a custom `location` during stage create and requests credential vending, Apache Polaris uses that location to construct delegated storage credentials immediately. The stage-create path itself neither runs the normal location validation nor the overlap checks before those credentials are issued. Closely related to that, the staged-create flow also accepts `write.data.path` / `write.metadata.path` in the request properties and feeds those location overrides into the same effective table location set used for credential vending. Those fields are secondary to the main custom-`location` exploit, but they are still attacker-influenced location inputs that should be validated before any credentials are issued.

Apache Polaris accepts literal `*` characters in namespace and table names. When it later builds temporary S3 access policies for delegated table access, those same characters appear to be reused unescaped in S3 IAM resource patterns and `s3:prefix` conditions. In S3 IAM policy matching, `*` is treated as a wildcard rather than as ordinary text. That means temporary credentials issued for one crafted table can match the storage path of a different table. In private testing against Polaris 1.4.0 using Polaris' AWS S3 temporary- credential path on both MinIO and real AWS S3, credentials returned for crafted tables such as `f*.t1`, `f*.*`, `*.*`, and `foo.*` could reach other tables' S3 locations. The confirmed behavior includes: - reading another table's metadata control file ([Iceberg metadata JSON]); - listing another table's exact S3 table prefix ([table prefix]); - and, when write delegation was returned for the crafted table, creating and deleting an object under another table's exact S3 table prefix. A control case using ordinary different names did not allow the same cross-table access. A least-privilege AWS S3 variant was also confirmed in which the attacker principal had no Polaris permissions on the victim table and only the minimal permissions required to create and use a crafted wildcard table (namespace-scoped `TABLE_CREATE` and `TABLE_WRITE_DATA` on `*`). In that setup, direct Polaris access to `foo.t1` remained forbidden, but the attacker could still create and load `*.*`, receive delegated S3 credentials, and use those credentials to list, read, create, and delete objects under `foo.t1`. In Iceberg, the metadata JSON file is a control file: it tells readers which data files belong to the table, which snapshots exist, and which table version to read. So unauthorized access to it is already a meaningful confidentiality problem. The confirmed write-capable variant means the issue is not limited to disclosure.

Account users in Apache CloudStack by default are allowed to register templates to be downloaded directly to the primary storage for deploying instances. Due to missing validation checks for KVM-compatible templates in CloudStack 4.0.0 through 4.18.2.4 and 4.19.0.0 through 4.19.1.2, an attacker that can register templates, can use them to deploy malicious instances on KVM-based environments and exploit this to gain access to the host filesystems that could result in the compromise of resource integrity and confidentiality, data loss, denial of service, and availability of KVM-based infrastructure managed by CloudStack. Users are recommended to upgrade to Apache CloudStack 4.18.2.5 or 4.19.1.3, or later, which addresses this issue. Additionally, all user-registered KVM-compatible templates can be scanned and checked that they are flat files that should not be using any additional or unnecessary features. For example, operators can run the following command on their file-based primary storage(s) and inspect the output. An empty output for the disk being validated means it has no references to the host filesystems; on the other hand, if the output for the disk being validated is not empty, it might indicate a compromised disk. However, bear in mind that (i) volumes created from templates will have references for the templates at first and (ii) volumes can be consolidated while migrating, losing their references to the templates. Therefore, the command execution for the primary storages can show both false positives and false negatives. for file in $(find /path/to/storage/ -type f -regex [a-f0-9\-]*.*); do echo "Retrieving file [$file] info. If the output is not empty, that might indicate a compromised disk; check it carefully."; qemu-img info -U $file | grep file: ; printf "\n\n"; done For checking the whole template/volume features of each disk, operators can run the following command: for file in $(find /path/to/storage/ -type f -regex [a-f0-9\-]*.*); do echo "Retrieving file [$file] info."; qemu-img info -U $file; printf "\n\n"; done

Improper input validation in the Pulsar Function Worker allows a malicious authenticated user to execute arbitrary Java code on the Pulsar Function worker, outside of the sandboxes designated for running user-provided functions. This vulnerability also applies to the Pulsar Broker when it is configured with "functionsWorkerEnabled=true". This issue affects Apache Pulsar versions from 2.4.0 to 2.10.5, from 2.11.0 to 2.11.3, from 3.0.0 to 3.0.2, from 3.1.0 to 3.1.2, and 3.2.0. 2.10 Pulsar Function Worker users should upgrade to at least 2.10.6. 2.11 Pulsar Function Worker users should upgrade to at least 2.11.4. 3.0 Pulsar Function Worker users should upgrade to at least 3.0.3. 3.1 Pulsar Function Worker users should upgrade to at least 3.1.3. 3.2 Pulsar Function Worker users should upgrade to at least 3.2.1. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.

The fix for CVE-2025-27636 added setLowerCase(true) to HttpHeaderFilterStrategy so that case-variant header names such as 'CAmelExecCommandExecutable' are filtered out alongside 'CamelExecCommandExecutable'. The same setLowerCase(true) call was not applied to five non-HTTP HeaderFilterStrategy implementations: JmsHeaderFilterStrategy and ClassicJmsHeaderFilterStrategy in camel-jms, SjmsHeaderFilterStrategy in camel-sjms, CoAPHeaderFilterStrategy in camel-coap, and GooglePubsubHeaderFilterStrategy in camel-google-pubsub. Because those strategies use case-sensitive String.startsWith('Camel'/'camel') filtering while the Camel Exchange stores headers in a case-insensitive map, an attacker with JMS (or equivalent) producer access to the broker consumed by a Camel route can inject case-variant Camel internal headers, which are then resolved by downstream components such as camel-exec and camel-file using their canonical casing. This enables remote code execution and arbitrary file write on routes that forward JMS messages to header-driven components. This issue affects Apache Camel: from 3.0.0 before 4.14.6, from 4.15.0 before 4.18.2, from 4.19.0 before 4.20.0. Users are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.6. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.2.

In Apache Spark versions prior to 3.4.0, applications using spark-submit can specify a 'proxy-user' to run as, limiting privileges. The application can execute code with the privileges of the submitting user, however, by providing malicious configuration-related classes on the classpath. This affects architectures relying on proxy-user, for example those using Apache Livy to manage submitted applications. Update to Apache Spark 3.4.0 or later, and ensure that spark.submit.proxyUser.allowCustomClasspathInClusterMode is set to its default of "false", and is not overridden by submitted applications.

XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability which may allow a remote attacker who has sufficient rights to execute commands of the host only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16.

** UNSUPPORTED WHEN ASSIGNED ** Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in Apache Continuum. This issue affects Apache Continuum: all versions. Attackers with access to the installations REST API can use this to invoke arbitrary commands on the server. As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

An SQL injection vulnerability in Traffic Ops in Apache Traffic Control <= 8.0.1, >= 8.0.0 allows a privileged user with role "admin", "federation", "operations", "portal", or "steering" to execute arbitrary SQL against the database by sending a specially-crafted PUT request. Users are recommended to upgrade to version Apache Traffic Control 8.0.2 if you run an affected version of Traffic Ops.

In Pulsar Functions Worker, authenticated users can upload functions in jar or nar files. These files, essentially zip files, are extracted by the Functions Worker. However, if a malicious file is uploaded, it could exploit a directory traversal vulnerability. This occurs when the filenames in the zip files, which aren't properly validated, contain special elements like "..", altering the directory path. This could allow an attacker to create or modify files outside of the designated extraction directory, potentially influencing system behavior. This vulnerability also applies to the Pulsar Broker when it is configured with "functionsWorkerEnabled=true". This issue affects Apache Pulsar versions from 2.4.0 to 2.10.5, from 2.11.0 to 2.11.3, from 3.0.0 to 3.0.2, from 3.1.0 to 3.1.2, and 3.2.0. 2.10 Pulsar Function Worker users should upgrade to at least 2.10.6. 2.11 Pulsar Function Worker users should upgrade to at least 2.11.4. 3.0 Pulsar Function Worker users should upgrade to at least 3.0.3. 3.1 Pulsar Function Worker users should upgrade to at least 3.1.3. 3.2 Pulsar Function Worker users should upgrade to at least 3.2.1. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.

ActionServlet.java in Apache Struts 1 1.x through 1.3.10 does not properly restrict the Validator configuration, which allows remote attackers to conduct cross-site scripting (XSS) attacks or cause a denial of service via crafted input, a related issue to CVE-2015-0899.

A security Bypass vulnerability exists in the FcgidPassHeader Proxy in mod_fcgid through 2016-07-07.

Adding method ACLs in remap.config can cause a segfault when the user makes a carefully crafted request. This affects versions Apache Traffic Server (ATS) 6.0.0 to 6.2.2 and 7.0.0 to 7.1.3. To resolve this issue users running 6.x should upgrade to 6.2.3 or later versions and 7.x users should upgrade to 7.1.4 or later versions.

A Denial of Service vulnerability was found in Apache Qpid Broker-J 7.0.0 in functionality for authentication of connections for AMQP protocols 0-8, 0-9, 0-91 and 0-10 when PLAIN or XOAUTH2 SASL mechanism is used. The vulnerability allows unauthenticated attacker to crash the broker instance. AMQP 1.0 and HTTP connections are not affected. An authentication of incoming AMQP connections in Apache Qpid Broker-J is performed by special entities called "Authentication Providers". Each Authentication Provider can support several SASL mechanisms which are offered to the connecting clients as part of SASL negotiation process. The client chooses the most appropriate SASL mechanism for authentication. Authentication Providers of following types supports PLAIN SASL mechanism: Plain, PlainPasswordFile, SimpleLDAP, Base64MD5PasswordFile, MD5, SCRAM-SHA-256, SCRAM-SHA-1. XOAUTH2 SASL mechanism is supported by Authentication Providers of type OAuth2. If an AMQP port is configured with any of these Authentication Providers, the Broker may be vulnerable.

If a user of Apache Commons Email (typically an application programmer) passes unvalidated input as the so-called "Bounce Address", and that input contains line-breaks, then the email details (recipients, contents, etc.) might be manipulated. Mitigation: Users should upgrade to Commons-Email 1.5. You can mitigate this vulnerability for older versions of Commons Email by stripping line-breaks from data, that will be passed to Email.setBounceAddress(String).

Apache Struts 2.x before 2.3.28 allows remote attackers to execute arbitrary code via a "%{}" sequence in a tag attribute, aka forced double OGNL evaluation.

Apache Flume versions 1.4.0 through 1.10.1 are vulnerable to a remote code execution (RCE) attack when a configuration uses a JMS Source with an unsafe providerURL. This issue is fixed by limiting JNDI to allow only the use of the java protocol or no protocol.

SpringEL injection in the server agent in Apache Ambari version 2.7.0 to 2.7.6 allows a malicious authenticated user to execute arbitrary code remotely. Users are recommended to upgrade to 2.7.7.

In Apache Struts 2.3.7 through 2.3.33 and 2.5 through 2.5.12, if an application allows entering a URL in a form field and built-in URLValidator is used, it is possible to prepare a special URL which will be used to overload server process when performing validation of the URL. NOTE: this vulnerability exists because of an incomplete fix for S2-047 / CVE-2017-7672.

When a call-site passes a subject for an email that contains line-breaks in Apache Commons Email 1.0 through 1.4, the caller can add arbitrary SMTP headers.

It was found that the Apache ActiveMQ client before 5.14.5 exposed a remote shutdown command in the ActiveMQConnection class. An attacker logged into a compromised broker could use this flaw to achieve denial of service on a connected client.

File read and write vulnerability in Apache DolphinScheduler ,  authenticated users can illegally access additional resource files. This issue affects Apache DolphinScheduler: from 3.1.0 before 3.2.2. Users are recommended to upgrade to version 3.2.2, which fixes the issue.

In Apache httpd before 2.2.34 and 2.4.x before 2.4.27, the value placeholder in [Proxy-]Authorization headers of type 'Digest' was not initialized or reset before or between successive key=value assignments by mod_auth_digest. Providing an initial key with no '=' assignment could reflect the stale value of uninitialized pool memory used by the prior request, leading to leakage of potentially confidential information, and a segfault in other cases resulting in denial of service.

A maliciously constructed svn+ssh:// URL would cause Subversion clients before 1.8.19, 1.9.x before 1.9.7, and 1.10.0.x through 1.10.0-alpha3 to run an arbitrary shell command. Such a URL could be generated by a malicious server, by a malicious user committing to a honest server (to attack another user of that server's repositories), or by a proxy server. The vulnerability affects all clients, including those that use file://, http://, and plain (untunneled) svn://.

The REST Plugin in Apache Struts 2.1.x, 2.3.7 through 2.3.33 and 2.5 through 2.5.12 is using an outdated XStream library which is vulnerable and allow perform a DoS attack using malicious request with specially crafted XML payload.

Application plugins in Apache CXF Fediz before 1.1.3 and 1.2.x before 1.2.1 allow remote attackers to cause a denial of service.

Apache Cordova iOS before 4.0.0 allows remote attackers to execute arbitrary plugins via a link.

Apache ActiveMQ 5.x before 5.13.0 does not restrict the classes that can be serialized in the broker, which allows remote attackers to execute arbitrary code via a crafted serialized Java Message Service (JMS) ObjectMessage object.

Apache Struts 2.x before 2.3.24.1 allows remote attackers to manipulate Struts internals, alter user sessions, or affect container settings via vectors involving a top object.

Policy resource matcher in Apache Ranger before 0.7.1 ignores characters after '*' wildcard character - like my*test, test*.txt. This can result in unintended behavior.

There is a DOS attack vulnerability in Apache Traffic Server (ATS) 5.2.0 to 5.3.2, 6.0.0 to 6.2.0, and 7.0.0 with the TLS handshake. This issue can cause the server to coredump.

This vulnerable is about a potential code injection when an attacker has control of the target LDAP server using in the JDBC JNDI URL. The function jaas.modules.src.main.java.porg.apache.karaf.jass.modules.jdbc.JDBCUtils#doCreateDatasource use InitialContext.lookup(jndiName) without filtering. An user can modify `options.put(JDBCUtils.DATASOURCE, "osgi:" + DataSource.class.getName());` to `options.put(JDBCUtils.DATASOURCE,"jndi:rmi://x.x.x.x:xxxx/Command");` in JdbcLoginModuleTest#setup. This is vulnerable to a remote code execution (RCE) attack when a configuration uses a JNDI LDAP data source URI when an attacker has control of the target LDAP server.This issue affects all versions of Apache Karaf up to 4.4.1 and 4.3.7. We encourage the users to upgrade to Apache Karaf at least 4.4.2 or 4.3.8

The chunked transfer coding implementation in the Apache HTTP Server before 2.4.14 does not properly parse chunk headers, which allows remote attackers to conduct HTTP request smuggling attacks via a crafted request, related to mishandling of large chunk-size values and invalid chunk-extension characters in modules/http/http_filters.c.

The Pulsar Functions Worker includes a capability that permits authenticated users to create functions where the function's implementation is referenced by a URL. The supported URL schemes include "file", "http", and "https". When a function is created using this method, the Functions Worker will retrieve the implementation from the URL provided by the user. However, this feature introduces a vulnerability that can be exploited by an attacker to gain unauthorized access to any file that the Pulsar Functions Worker process has permissions to read. This includes reading the process environment which potentially includes sensitive information, such as secrets. Furthermore, an attacker could leverage this vulnerability to use the Pulsar Functions Worker as a proxy to access the content of remote HTTP and HTTPS endpoint URLs. This could also be used to carry out denial of service attacks. This vulnerability also applies to the Pulsar Broker when it is configured with "functionsWorkerEnabled=true". This issue affects Apache Pulsar versions from 2.4.0 to 2.10.5, from 2.11.0 to 2.11.3, from 3.0.0 to 3.0.2, from 3.1.0 to 3.1.2, and 3.2.0. 2.10 Pulsar Function Worker users should upgrade to at least 2.10.6. 2.11 Pulsar Function Worker users should upgrade to at least 2.11.4. 3.0 Pulsar Function Worker users should upgrade to at least 3.0.3. 3.1 Pulsar Function Worker users should upgrade to at least 3.1.3. 3.2 Pulsar Function Worker users should upgrade to at least 3.2.1. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The updated versions of Pulsar Functions Worker will, by default, impose restrictions on the creation of functions using URLs. For users who rely on this functionality, the Function Worker configuration provides two configuration keys: "additionalEnabledConnectorUrlPatterns" and "additionalEnabledFunctionsUrlPatterns". These keys allow users to specify a set of URL patterns that are permitted, enabling the creation of functions using URLs that match the defined patterns. This approach ensures that the feature remains available to those who require it, while limiting the potential for unauthorized access and exploitation.

Apache Cordova Android before 3.7.2 and 4.x before 4.0.2, when an application does not set explicit values in config.xml, allows remote attackers to modify undefined secondary configuration variables (preferences) via a crafted intent: URL.

In Apache httpd 2.4.0 to 2.4.29, the expression specified in <FilesMatch> could match '$' to a newline character in a malicious filename, rather than matching only the end of the filename. This could be exploited in environments where uploads of some files are are externally blocked, but only by matching the trailing portion of the filename.

It is possible to provide data to be read that leads the reader to loop in cycles endlessly, consuming CPU. This issue affects Rust applications using Apache Avro Rust SDK prior to 0.14.0 (previously known as avro-rs). Users should update to apache-avro version 0.14.0 which addresses this issue.

The MultiPageValidator implementation in Apache Struts 1 1.1 through 1.3.10 allows remote attackers to bypass intended access restrictions via a modified page parameter.

In Apache Struts 2.0.0 through 2.3.33 and 2.5 through 2.5.10.1, using an unintentional expression in a Freemarker tag instead of string literals can lead to a RCE attack.

Forced OGNL evaluation, when evaluated on raw user input in tag attributes, may lead to remote code execution. Affected software : Apache Struts 2.0.0 - Struts 2.5.25.

A JNDI Injection vulnerability has been discovered in Apache CXF's JCA integration module, which can allow for code execution, if an attacker is able to manipulate the JCA deployment descriptor (ra.xml) or runtime activation parameters. Users are recommended to upgrade to versions 4.2.2 or 4.1.7, which fixes this issue.

A further incomplete fix for a previous advisory CVE-2026-44417 (Untrusted JMS configuration can lead to RCE) for Apache CXF has been identified, which can allow code execution capabilities, if untrusted users are allowed to configure JMS for Apache CXF. Users are recommended to upgrade to versions 4.2.2 or 4.1.7, which fixes this issue.

Improper Input Validation vulnerability in HTTP/2 header parsing of Apache Traffic Server allows an attacker to smuggle requests. This issue affects Apache Traffic Server 8.0.0 to 9.1.2.

Improper Input Validation vulnerability in handling the Transfer-Encoding header of Apache Traffic Server allows an attacker to poison the cache. This issue affects Apache Traffic Server 8.0.0 to 9.0.2.

The lua_websocket_read function in lua_request.c in the mod_lua module in the Apache HTTP Server through 2.4.12 allows remote attackers to cause a denial of service (child-process crash) by sending a crafted WebSocket Ping frame after a Lua script has called the wsupgrade function.

internal/XMLReader.cpp in Apache Xerces-C before 3.1.2 allows remote attackers to cause a denial of service (segmentation fault and crash) via crafted XML data.

Improper Input Validation vulnerability in HTTP/2 frame handling of Apache Traffic Server allows an attacker to smuggle requests. This issue affects Apache Traffic Server 8.0.0 to 9.1.2.

Improper Input Validation vulnerability in Apache ActiveMQ Broker, Apache ActiveMQ, Apache ActiveMQ All. An attacker that has access to publish or modify entries in LDAP that match the configured searchBase and searchFilter can instantiate denied transports inside the broker JVM. This can be used to fetch an attacker URL and spawn a second BrokerService inside the same JVM. This issue affects Apache ActiveMQ Broker: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7. Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.

## Summary The iOS implementation of `cordova-plugin-inappbrowser` passes the `id` field from a `WKScriptMessage` body to `commandDelegate sendPluginResult:callbackId:` with no format validation (`CDVWKInAppBrowser.m:560–574`). Any web content loaded inside the InAppBrowser can fire any pending Cordova callback in the host app by posting a message whose `id` field is a guessable or enumerated callback identifier. An attack abusing this weakness must be tailored to the specific plugins and callback IDs the host app uses. Though an attacker with knowledge of common Cordova plugin configurations could craft reusable payloads targeting widely-adopted plugins. ## Impact An unauthenticated remote attacker who controls content displayed in the InAppBrowser — via a URL the app opens (OAuth redirect, marketing link, deep-link target) or a network interception — can call `window.webkit.messageHandlers.cordova_iab.postMessage({id: '<victim-callback-id>', d: '...'})` to fire callbacks belonging to any other installed Cordova plugin (Camera, Contacts, File, Geolocation). Cordova callback IDs follow the predictable format `<PluginName><sequential-integer>`, making enumeration feasible. Successful exploitation allows the attacker to spoof plugin results across trust boundaries — for example, injecting a forged camera approval, a fabricated contacts list, or a crafted file-read response. This issue affects Cordova Plugin InAppBrowser: from 3.1.0 through 6.0.0. Users are recommended to upgrade to version 6.0.1, which fixes the issue.