Hermes WebUI before version 0.51.270 contains a resource exhaustion vulnerability that allows unauthenticated remote attackers to degrade service availability by repeatedly calling the passkey options endpoint without completing assertion. Attackers can send unlimited POST requests to the authentication endpoint, causing unbounded growth of the challenge store file and excessive CPU and disk I/O through repeated JSON file rewrites.

Starlette is a lightweight ASGI (Asynchronous Server Gateway Interface) framework/toolkit, designed for building async web services in Python. In versions 0.47.1 and below, when parsing a multi-part form with large files (greater than the default max spool size) starlette will block the main thread to roll the file over to disk. This blocks the event thread which means the application can't accept new connections. The UploadFile code has a minor bug where instead of just checking for self._in_memory, the logic should also check if the additional bytes will cause a rollover. The vulnerability is fixed in version 0.47.2.

opentelemetry-js is the OpenTelemetry JavaScript Client. Prior to 2.8.0, W3CBaggagePropagator.extract() in @opentelemetry/core does not enforce size limits when parsing inbound baggage HTTP headers. The W3C Baggage specification recommends a maximum of 8,192 bytes and 180 entries; these limits were only enforced on the outbound (inject()) path, not on the inbound (extract()) path. Parsing oversized baggage causes memory allocation proportional to the header size without any cap. This vulnerability is fixed in 2.8.0.

protobufjs compiles protobuf definitions into JavaScript (JS) functions. From 8.2.0 to 8.4.2, protobufjs preserved unknown wire elements in message.$unknowns and did not provide a decode-time option to discard unknown fields before retaining them. A crafted protobuf payload containing many unknown fields could therefore cause a decoded message to retain substantially more memory than the input size would suggest, even when unknown-field round-tripping is not needed. protobufjs 8.5.0 added the relevant decode-time options, allowing applications that decode untrusted protobuf data to disable unknown-field retention during decode. protobufjs 8.6.2 flips the default so unknown fields are discarded unless explicitly opted into.

Password Pusher, an open source application to communicate sensitive information over the web, comes with a configurable rate limiter. In versions prior to v1.49.0, the rate limiter could be bypassed by forging proxy headers allowing bad actors to send unlimited traffic to the site potentially causing a denial of service. In v1.49.0, a fix was implemented to only authorize proxies on local IPs which resolves this issue. As a workaround, one may add rules to one's proxy and/or firewall to not accept external proxy headers such as `X-Forwarded-*` from clients.

Joomla! 1.03 does not restrict the number of "Search" Mambots, which allows remote attackers to cause a denial of service (resource consumption) via a large number of Search Mambots.

An HTTP/2 implementation flaw allows a denial-of-service (DoS) that uses malformed HTTP/2 control frames in order to break the max concurrent streams limit (HTTP/2 MadeYouReset Attack).  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

In OpenStack Ironic 32 before 37.0.0, an unauthenticated malicious user could submit a crafted JSON string to some endpoints on the API or JSON-RPC service and effect a service crash.

joserfc is a Python library that provides an implementation of several JSON Object Signing and Encryption (JOSE) standards. In versions 1.3.4 through 1.6.5, joserfc accepts oversized RFC7797 b64=false JWS payloads without applying JWSRegistry.max_payload_length, which can lead to resource exhaustion. The normal JWS compact and flattened JSON paths reject payloads above the configured payload-size limit with ExceededSizeError. The RFC7797 unencoded payload paths do not make the same check. A valid b64=false compact or flattened JSON JWS can therefore deserialize successfully with a payload larger than JWSRegistry.max_payload_length. Applications that accept lower-trust JWS values and rely on joserfc to reject oversized token content during verification have a moderate availability risk. This issue has been fixed in version 1.6.7.

A Regular Expression Denial of Service (ReDOS) vulnerability was discovered in Color-String version 1.5.5 and below which occurs when the application is provided and checks a crafted invalid HWB string.

Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, Netty HTTP/2 max header size handling produces an attack similar to HTTP/2 Rapid Reset. There is a setting in the http2 specification called `SETTINGS_MAX_HEADER_LIST_SIZE`. When a client sends that setting to Netty, it appears that Netty will behave as follows: read the request; proxy the request to the origin; attempt to produce a response; and create an exception while writing the headers for the response. Functionally, this should be similar to the http2 reset attack, but with a different on-the-wire signature. Versions 4.1.135.Final and 4.2.15.Final patch the issue.

cpp-httplib is a C++11 single-file header-only cross platform HTTP/HTTPS library. Prior to 0.43.4, negative chunk-size in chunked Transfer-Encoding causes unbounded memory allocation and process crash. The ChunkedDecoder::read_payload function in cpp-httplib (httplib.h) parses the chunk-size field of HTTP chunked transfer encoding using std::strtoul(). Per the C standard (§7.22.1.4), strtoul silently accepts a leading minus sign, performing unsigned wrap-around: strtoul("-2", …, 16) returns ULONG_MAX − 1 (0xFFFFFFFFFFFFFFFE). The library's only guard (line 12833) rejects ULONG_MAX (the result of "-1"), but any other negative value such as "-2" passes validation. The resulting near-maximum value is stored in chunk_remaining and controls how many bytes the server's read loop consumes from the network. This vulnerability is fixed in 0.43.4.

NiceGUI is a Python-based UI framework. Prior to version 3.12.0, two FastAPI routes that serve per-component static assets in NiceGUI accept a sub-path parameter that may resolve to a directory rather than a file. Requests that resolve to a directory raise an unhandled RuntimeError inside Starlette's FileResponse, which Uvicorn writes to the server log as a full traceback. Because the routes are reachable without authentication, a remote attacker can amplify log volume and consume disk and log-pipeline capacity on any publicly reachable NiceGUI server. This issue has been patched in version 3.12.0.

opentelemetry-java is the Java implementation of the OpenTelemetry API for recording telemetry, and SDK for managing telemetry recorded by the API. Prior to 1.62.0, a vulnerability affects the baggage propagation implementation in opentelemetry-api and opentelemetry-extension-trace-propagators. Parsing oversized baggage causes unbounded memory allocation and CPU consumption. Because baggage is automatically re-injected into every outgoing request, the effect can fan out to downstream services that never received the original malicious request. This vulnerability is fixed in 1.62.0.

TYPO3 is an enterprise content management system. Starting in version 9.0.0 and prior to versions 9.5.48 ELTS, 10.4.45 ELTS, 11.5.37 LTS, 12.4.15 LTS, and 13.1.1, the `ShowImageController` (`_eID tx_cms_showpic_`) lacks a cryptographic HMAC-signature on the `frame` HTTP query parameter (e.g. `/index.php?eID=tx_cms_showpic?file=3&...&frame=12345`). This allows adversaries to instruct the system to produce an arbitrary number of thumbnail images on the server side. TYPO3 versions 9.5.48 ELTS, 10.4.45 ELTS, 11.5.37 LTS, 12.4.15 LTS, 13.1.1 fix the problem described.

REXML is an XML toolkit for Ruby. The REXML gem before 3.2.6 has a denial of service vulnerability when it parses an XML that has many `<`s in an attribute value. Those who need to parse untrusted XMLs may be impacted to this vulnerability. The REXML gem 3.2.7 or later include the patch to fix this vulnerability. As a workaround, don't parse untrusted XMLs.

daphne before 4.2.2 did not pass maxFramePayloadSize or maxMessagePayloadSize to Autobahn's WebSocketServerFactory. Because Autobahn defaults both values to 0 (unlimited), an unauthenticated remote attacker could send arbitrarily large WebSocket messages or frames, causing excessive memory consumption and a denial of service.

ZEBRA is a Zcash node written entirely in Rust. Prior to zebrad version 4.4.0, prior to zebra-chain version 7.0.0, and prior to zebra-network version 6.0.0, several inbound deserialization paths in Zebra allocated buffers sized against generic transport or block-size ceilings before the tighter protocol or consensus limits were enforced. An unauthenticated or post-handshake peer could therefore force the node to preallocate and parse for orders of magnitude more data than the protocol intended, across headers messages, equihash solutions in block headers, Sapling spend vectors in V5/V4 transactions, and coinbase script bytes in blocks. This issue has been patched in zebrad version 4.4.0, zebra-chain version 7.0.0, and zebra-network version 6.0.0.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-47 and 7.1.2-22, due to a missing check in the PSD decoder it would be possible to bypass the list-length resource policy when decoding a PSD image. Other security limits would still apply. This issue has been patched in versions 6.9.13-47 and 7.1.2-22.

Allocation of Resources Without Limits or Throttling vulnerability in mtrudel bandit allows unauthenticated memory exhaustion via oversized HTTP/2 frames. 'Elixir.Bandit.HTTP2.Frame':deserialize/2 in lib/bandit/http2/frame.ex checks the SETTINGS_MAX_FRAME_SIZE limit only after pattern-matching payload::binary-size(length), which requires the entire frame body to be present in memory before either the accept or reject clause can fire. A peer that announces a frame length up to the 24-bit maximum (~16 MiB) causes the server to buffer that entire body before the size guard is evaluated, regardless of the max_frame_size negotiated during the HTTP/2 handshake (default 16 KiB per RFC 9113). An unauthenticated attacker holding many concurrent connections can force the server to buffer far more memory than the negotiated frame size limit should permit, leading to memory pressure and potential denial of service. This issue affects bandit: from 0.3.6 before 1.11.0.

An allocation of resources without limits or throttling [CWE-770] vulnerability in FortiOS versions 7.6.0, versions 7.4.4 through 7.4.0, 7.2 all versions, 7.0 all versions, 6.4 all versions may allow a remote unauthenticated attacker to prevent access to the GUI via specially crafted requests directed at specific endpoints.

OpenLiteSpeed before 1.8.1 mishandles chunked encoding.

ImageSharp is a 2D graphics API. A vulnerability discovered in the ImageSharp library, where the processing of specially crafted files can lead to excessive memory usage in image decoders. The vulnerability is triggered when ImageSharp attempts to process image files that are designed to exploit this flaw. This flaw can be exploited to cause a denial of service (DoS) by depleting process memory, thereby affecting applications and services that rely on ImageSharp for image processing tasks. Users and administrators are advised to update to the latest version of ImageSharp that addresses this vulnerability to mitigate the risk of exploitation. The problem has been patched in v3.1.4 and v2.1.8.

An issue was discovered in Prosody before 0.12.6 and 1.0.0 through 13.0.0 before 13.0.5. A Denial of Service can occur via memory exhaustion caused by XML parsing resource amplification from unauthenticated connections.

Axios is a promise based HTTP client for the browser and Node.js. Prior to 1.15.1 and 0.31.1, for stream request bodies, maxBodyLength is bypassed when maxRedirects is set to 0 (native http/https transport path). Oversized streamed uploads are sent fully even when the caller sets strict body limits. This vulnerability is fixed in 1.15.1 and 0.31.1.

Applications which accept user-supplied Spring Expression Language (SpEL) expressions may be vulnerable to a Denial of Service (DoS) attack if the evaluation of a SpEL expression triggers unbounded cache growth. Affected versions: Spring Framework 7.0.0 through 7.0.7; 6.2.0 through 6.2.18; 6.1.0 through 6.1.27; 5.3.0 through 5.3.48.

OpenClaw before 2026.3.31 contains an incomplete fix for CVE-2026-32062 where the voice-call component parses large WebSocket frames before start validation. Remote attackers can send oversized pre-start WebSocket frames to cause resource consumption and denial of service.

Netty is an asynchronous event-driven network application framework for rapid development of maintainable high performance protocol servers & clients. The `HttpPostRequestDecoder` can be tricked to accumulate data. While the decoder can store items on the disk if configured so, there are no limits to the number of fields the form can have, an attacher can send a chunked post consisting of many small fields that will be accumulated in the `bodyListHttpData` list. The decoder cumulates bytes in the `undecodedChunk` buffer until it can decode a field, this field can cumulate data without limits. This vulnerability is fixed in 4.1.108.Final.

OpenTelemetry.Exporter.Zipkin is the .NET Zipkin exporter for OpenTelemetry. In versions 1.15.2 and earlier, the Zipkin exporter remote endpoint cache accepts unbounded key growth derived from span attributes. In high-cardinality scenarios, a process using Zipkin export for client or producer spans could experience avoidable memory growth under sustained unique remote endpoint values, increasing process memory usage over time and degrading availability. This issue is fixed in version 1.15.3, which introduces a bounded, thread-safe LRU cache for remote endpoints with a fixed maximum size.

nghttp2 is an implementation of the Hypertext Transfer Protocol version 2 in C. The nghttp2 library prior to version 1.61.0 keeps reading the unbounded number of HTTP/2 CONTINUATION frames even after a stream is reset to keep HPACK context in sync. This causes excessive CPU usage to decode HPACK stream. nghttp2 v1.61.0 mitigates this vulnerability by limiting the number of CONTINUATION frames it accepts per stream. There is no workaround for this vulnerability.

Yeti bridges the gap between CTI and DFIR practitioners by providing a Forensics Intelligence platform and pipeline. Remote user-controlled data tags can reach a Unicode normalization with a compatibility form NFKD. Under Windows, such normalization is costly in resources and may lead to denial of service with attacks such as One Million Unicode payload. This can get worse with the use of special Unicode characters like U+2100 (℀), or U+2105 (℅) which could lead the payload size to be tripled. Versions prior to 2.1.11 are affected by this vulnerability. The patch is included in 2.1.11.

XWiki Platform is a generic wiki platform offering runtime services for applications built on top of it. Versions 1.8-rc-1, 17.0.0-rc-1 and 17.5.0-rc-1 and prior include a resource exhaustion vulnerability in REST API endpoints such as /xwiki/rest/wikis/xwiki/spaces/AnnotationCode/pages/AnnotationConfig/objects/AnnotationCode.AnnotationConfig/0/properties, which list all available pages as part of the metadata for database list properties without applying query limits. On large wikis, this can exhaust available server resources. This issue has been patched in versions 16.10.16, 17.4.8 and 17.10.1.

quic-go is an implementation of the QUIC protocol in Go. Prior to version 0.59.1, an attacker can cause excessive memory allocation in quic-go's HTTP/3 client and server implementations by sending a QPACK-encoded HEADERS frame that decodes into a large trailer field section with many unique field names and/or large values. The implementation builds an `http.Header` for the corresponding `http.Request` or `http.Response`, while only enforcing limits on the size of the QPACK-compressed HEADERS frame, not on the decoded field section. This can lead to memory exhaustion. This is very similar to CVE-2025-64702. The difference is that this issue uses HTTP trailers, rather than HTTP headers, as the attack vector. A misbehaving or malicious peer can cause a denial-of-service (DoS) attack against quic-go's HTTP/3 servers or clients by triggering excessive memory allocation, potentially leading to crashes or resource exhaustion. This affects both servers and clients due to symmetric header construction. Version 0.59.1 enforces RFC 9114 decoded field section size limits for trailers as well. It incrementally decodes QPACK entries and checks the field section size after each entry, aborting the stream if an entry causes the limit to be exceeded.

OpenClaw before 2026.3.22 contains an unbounded memory allocation vulnerability in remote media HTTP error handling that allows attackers to trigger excessive memory consumption. Attackers can send crafted HTTP error responses with large bodies to remote media endpoints, causing the application to allocate unbounded memory before failure handling occurs.

nimiq-libp2p is a Nimiq network implementation based on libp2p. Prior to version 1.3.0, `MessageCodec::read_request` and `read_response` call `read_to_end()` on inbound substreams, so a remote peer can send only a partial frame and keep the substream open. because `Behaviour::new` also sets `with_max_concurrent_streams(1000)`, the node exposes a much larger stalled-slot budget than the library default. The patch for this vulnerability is formally released as part of v1.3.0. No known workarounds are available.

The Ruby SAML library is for implementing the client side of a SAML authorization. In versions 1.18.0 and below, a denial-of-service vulnerability exists in ruby-saml even with the message_max_bytesize setting configured. The vulnerability occurs because the SAML response is validated for Base64 format prior to checking the message size, leading to potential resource exhaustion. This is fixed in version 1.18.1.

ImageSharp is a 2D graphics API. A vulnerability discovered in the ImageSharp library, where the processing of specially crafted files can lead to excessive memory usage in the Gif decoder. The vulnerability is triggered when ImageSharp attempts to process image files that are designed to exploit this flaw. All users are advised to upgrade to v3.1.5 or v2.1.9.

A client can trigger excessive memory allocation by generating a lot of errors responses over a single DoQ and DoH3 connection, as some resources were not properly released until the end of the connection.

An attacker can send a web request that causes unlimited memory allocation in the internal web server, leading to a denial of service. The internal web server is disabled by default.

By publishing and querying a crafted zone an attacker can cause allocation of large entries in the negative and aggressive NSEC(3) caches.

NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, a malicious client which can connect to the WebSockets port can cause unbounded memory use in the nats-server before authentication; this requires sending a corresponding amount of data. This is a milder variant of CVE-2026-27571. That earlier issue was a compression bomb, this vulnerability is not. Attacks against this new issue thus require significant client bandwidth. Versions 2.11.15 and 2.12.6 contain a fix. As a workaround, disable websockets if not required for project deployment.

A client can trigger excessive memory allocation by generating a lot of queries that are routed to an overloaded DoH backend, causing queries to accumulate into a buffer that will not be released until the end of the connection.

An attacker can send a web request that causes unlimited memory allocation in the internal web server, leading to a denial of service. The internal web server is disabled by default.

NiceGUI is a Python-based UI framework. Prior to version 3.9.0, NiceGUI's app.add_media_file() and app.add_media_files() media routes accept a user-controlled query parameter that influences how files are read during streaming. The parameter is passed to the range-response implementation without validation, allowing an attacker to bypass chunked streaming and force the server to load entire files into memory at once. With large media files and concurrent requests, this can lead to excessive memory consumption, degraded performance, or denial of service. This issue has been patched in version 3.9.0.

An attacker can create a large number of concurrent DoQ or DoH3 connections, causing unlimited memory allocation in DNSdist and leading to a denial of service. DOQ and DoH3 are disabled by default.

Helm is a tool for managing Charts, pre-configured Kubernetes resources. Versions prior to 3.10.3 are subject to Uncontrolled Resource Consumption, resulting in Denial of Service. Input to functions in the _strvals_ package can cause a stack overflow. In Go, a stack overflow cannot be recovered from. Applications that use functions from the _strvals_ package in the Helm SDK can have a Denial of Service attack when they use this package and it panics. This issue has been patched in 3.10.3. SDK users can validate strings supplied by users won't create large arrays causing significant memory usage before passing them to the _strvals_ functions.

Next.js is a React framework for building full-stack web applications. Starting in version 16.0.1 and prior to version 16.1.7, a request containing the `next-resume: 1` header (corresponding with a PPR resume request) would buffer request bodies without consistently enforcing `maxPostponedStateSize` in certain setups. The previous mitigation protected minimal-mode deployments, but equivalent non-minimal deployments remained vulnerable to the same unbounded postponed resume-body buffering behavior. In applications using the App Router with Partial Prerendering capability enabled (via `experimental.ppr` or `cacheComponents`), an attacker could send oversized `next-resume` POST payloads that were buffered without consistent size enforcement in non-minimal deployments, causing excessive memory usage and potential denial of service. This is fixed in version 16.1.7 by enforcing size limits across all postponed-body buffering paths and erroring when limits are exceeded. If upgrading is not immediately possible, block requests containing the `next-resume` header, as this is never valid to be sent from an untrusted client.

An attacker with access via network to the Regesta Smart HD-PLC of the provider Teldat (in this case, NO registration action is required) who has the vulnerable software could, with a Slow Loris attack, cause Denial of Service (DoS) on the web interface of the device. This issue affects Regesta Smart HD-PLC - TLDPH16D2: 11.02.05.10.02.

zae-limiter is a rate limiting library using the token bucket algorithm. Prior to version 0.10.1, all rate limit buckets for a single entity share the same DynamoDB partition key (`namespace/ENTITY#{id}`). A high-traffic entity can exceed DynamoDB's per-partition throughput limits (~1,000 WCU/sec), causing throttling that degrades service for that entity — and potentially co-located entities in the same partition. Version 0.10.1 fixes the issue.

An issue was discovered in Mattermost Server before 4.2.0, 4.1.1, and 4.0.5. It mishandles IP-based rate limiting.