A vulnerability was found in Tenda AC10 16.03.10.13 and classified as critical. This issue affects the function ShutdownSetAdd of the file /goform/ShutdownSetAdd. The manipulation of the argument list leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A weakness has been identified in Totolink N300RH 3.2.4-B20220812. Affected by this issue is the function setUpgradeFW of the file /cgi-bin/cstecgi.cgi of the component POST Request Handler. Executing a manipulation of the argument FileName can lead to buffer overflow. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks.

Buffer overflow in IBM Informix 11.50 through 11.50.xC9W2 and 11.70 before 11.70.xC7 allows remote authenticated users to execute arbitrary code via a crafted SQL statement.

A vulnerability was found in Tenda CX12L 16.03.53.12. This issue affects the function formSetPPTPServer of the file /goform/SetPptpServerCfg”. The manipulation results in stack-based buffer overflow. The attack can be executed remotely. The exploit has been made public and could be used.

A vulnerability was found in H3C GR-5400AX up to 100R008 and classified as critical. Affected by this issue is the function EditWlanMacList of the file /routing/goform/aspForm. The manipulation of the argument param leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in code-projects for Plugin 4.1.2cu.5137. The impacted element is the function setWiFiMultipleConfig in the library /lib/cste_modules/wireless.so of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument wepkey2 results in buffer overflow. The attack can be launched remotely. The exploit is now public and may be used.

Stack-based buffer overflow in the NSFComputeEvaluateExt function in Nnotes.dll in IBM Lotus Domino 8.5.2 allows remote authenticated users to execute arbitrary code via a long tHPRAgentName parameter in an fmHttpPostRequest OpenForm action to WebAdmin.nsf.

A weakness has been identified in Tenda F456 1.0.0.5. The impacted element is the function fromaddressNat of the file /goform/addressNat. Executing a manipulation of the argument menufacturer/Go can lead to buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks.

A vulnerability was found in Tenda FH1202 1.2.0.14(408). Affected by this issue is the function WrlExtraSet of the file /goform/WrlExtraSet of the component httpd. Performing a manipulation of the argument Go results in stack-based buffer overflow. The attack may be initiated remotely. The exploit has been made public and could be used.

A flaw has been found in Tenda HG10 HG7_HG9_HG10re_300001138_en_xpon. This issue affects the function formRoute of the file /boaform/formRouting of the component Boa Service. This manipulation of the argument nextHop causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been published and may be used.

A vulnerability has been found in H3C Magic B1 up to 100R004. The affected element is the function SetAPWifiorLedInfoById of the file /goform/aspForm. The manipulation of the argument param leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Tenda F456 1.0.0.5. The affected element is the function formQuickIndex of the file /goform/QuickIndex of the component httpd. Performing a manipulation of the argument mit_linktype results in buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used.

A vulnerability has been found in Tenda F456 1.0.0.5. This affects the function fromWrlclientSet of the file /goform/WrlclientSet of the component httpd. The manipulation leads to buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used.

A vulnerability was identified in Tenda F451 1.0.0.7_cn_svn7958. The affected element is the function fromSafeClientFilter of the file /goform/SafeClientFilter of the component httpd. The manipulation of the argument menufacturer/Go leads to buffer overflow. Remote exploitation of the attack is possible. The exploit is publicly available and might be used.

A security flaw has been discovered in UTT HiPER 1250GW up to 3.2.7-210907-180535. Impacted is the function strcpy of the file route/goform/ConfigAdvideo. The manipulation of the argument Profile results in buffer overflow. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was found in Tenda F456 1.0.0.5. Impacted is the function fromqossetting of the file /goform/qossetting. The manipulation of the argument page results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used.

A security vulnerability has been detected in H3C Magic B0 up to 100R002. This vulnerability affects the function Edit_BasicSSID of the file /goform/aspForm. Such manipulation of the argument param leads to buffer overflow. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Tenda F456 1.0.0.5. The impacted element is the function fromP2pListFilter of the file /goform/P2pListFilter. The manipulation of the argument menufacturer/Go leads to buffer overflow. The attack is possible to be carried out remotely. The exploit is publicly available and might be used.

A vulnerability was determined in Tenda F456 1.0.0.5. The affected element is the function formwebtypelibrary of the file /goform/webtypelibrary. This manipulation of the argument menufacturer/Go causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was detected in Tenda F456 1.0.0.5. Affected is the function fromGstDhcpSetSer of the file /goform/GstDhcpSetSer of the component httpd. Performing a manipulation of the argument dips results in buffer overflow. Remote exploitation of the attack is possible. The exploit is now public and may be used.

A security vulnerability has been detected in Tenda F456 1.0.0.5. Impacted is the function fromDhcpListClient of the file /goform/DhcpListClient of the component httpd. Such manipulation of the argument page leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used.

Skyworth Digital Technology RN510 V.3.1.0.4 RN510 V.3.1.0.4 contains a buffer overflow vulnerability in /cgi-bin/app-staticIP.asp. An authenticated attacker can send a specially crafted request to endpoint which can lead to a denial of service (DoS) or possible code execution on the device.

A remote buffer overflow vulnerability was discovered in some Aruba Instant Access Point (IAP) products in version(s): Aruba Instant 6.4.x: 6.4.4.8-4.2.4.17 and below; Aruba Instant 6.5.x: 6.5.4.16 and below; Aruba Instant 8.3.x: 8.3.0.12 and below; Aruba Instant 8.5.x: 8.5.0.6 and below; Aruba Instant 8.6.x: 8.6.0.2 and below. Aruba has released patches for Aruba Instant that address this security vulnerability.

A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated users to execute code via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.8.2823 build 20240712 and later QuTS hero h5.1.8.2823 build 20240712 and later

A vulnerability, which was classified as critical, was found in Tenda FH1202 1.2.0.14(408). This affects the function fromPptpUserSetting of the file /goform/PPTPUserSetting. The manipulation of the argument delno leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

Buffer overflow in the cuil component in Cisco Telepresence System Integrator C Series 4.x before TC4.2.0 allows remote authenticated users to cause a denial of service (endpoint reboot or process crash) or possibly execute arbitrary code via a long location parameter to the getxml program, aka Bug ID CSCtq46496.

RIOT is a real-time multi-threading operating system that supports a range of devices that are typically 8-bit, 16-bit and 32-bit microcontrollers. Most codebases define assertion macros which compile to a no-op on non-debug builds. If assertions are the only line of defense against untrusted input, the software may be exposed to attacks that leverage the lack of proper input checks. In detail, in the `nimble_scanlist_update()` function below, `len` is checked in an assertion and subsequently used in a call to `memcpy()`. If an attacker is able to provide a larger `len` value while assertions are compiled-out, they can write past the end of the fixed-length `e->ad` buffer. If the unchecked input above is attacker-controlled and crosses a security boundary, the impact of the buffer overflow vulnerability could range from denial of service to arbitrary code execution. This issue has not yet been patched. Users are advised to add manual `len` checking.

Multiple instances of incorrect calculation of buffer size in the Webmail and Administrative interface of FortiMail before 6.4.5 may allow an authenticated attacker with regular webmail access to trigger a buffer overflow and to possibly execute unauthorized code or commands via specifically crafted HTTP requests.

A buffer overflow vulnerability exists in Pulse Connect Secure before 9.1R11.4 allows a remote authenticated attacker to execute arbitrary code as the root user via maliciously crafted meeting room.

A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to execute code via a network. We have already fixed the vulnerability in the following version: QTS 5.1.7.2770 build 20240520 and later QuTS hero h5.1.7.2770 build 20240520 and later

A buffer overflow vulnerability exists in Windows File Resource Profiles in 9.X allows a remote authenticated user with privileges to browse SMB shares to execute arbitrary code as the root user. As of version 9.1R3, this permission is not enabled by default.

A buffer overflow occurs in utilities/rt-link/src/rtlink.c in RT-Thread through 5.0.2.

A stack-based buffer overflow vulnerability exists in the CMA check_udp_crc function of Garrett Metal Detectors’ iC Module CMA Version 5.0. A specially-crafted packet can lead to a stack-based buffer overflow during a call to memcpy. An attacker can send a malicious packet to trigger this vulnerability.

Stack-based buffer overflow in lcfd.exe in Tivoli Endpoint in IBM Tivoli Management Framework 3.7.1, 4.1, 4.1.1, and 4.3.1 allows remote authenticated users to execute arbitrary code via a long opts field.

A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated users to execute code via a network. We have already fixed the vulnerability in the following version: QTS 5.1.7.2770 build 20240520 and later QuTS hero h5.1.7.2770 build 20240520 and later

A vulnerability was determined in D-Link DIR-822K and DWR-M920 1.00_20250513164613/1.1.50. Impacted is an unknown function of the file /boafrm/formVpnConfigSetup. Executing manipulation of the argument submit-url can lead to buffer overflow. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized.

Multiple buffer overflows in freeSSHd 1.2.1 allow remote authenticated users to cause a denial of service (crash) and execute arbitrary code via a long (1) open, (2) unlink, (3) mkdir, (4) rmdir, or (5) stat SFTP command.

Stack-based buffer overflow in RaidenFTPD 2.4 build 3620 allows remote authenticated users to cause a denial of service (crash) or execute arbitrary code via long (1) CWD and (2) MLST commands.

Memory corruption in modem due to buffer overflow while processing a PPP packet

QEMU before 8.2.0 has an integer underflow, and resultant buffer overflow, via a TI command when an expected non-DMA transfer length is less than the length of the available FIFO data. This occurs in esp_do_nodma in hw/scsi/esp.c because of an underflow of async_len.

The issue was addressed with improved memory handling. This issue is fixed in macOS Big Sur 11.7, macOS Ventura 13, macOS Monterey 12.6. A remote user may be able to cause kernel code execution.

In PHP versions 7.4.x below 7.4.30, 8.0.x below 8.0.20, and 8.1.x below 8.1.7, when pdo_mysql extension with mysqlnd driver, if the third party is allowed to supply host to connect to and the password for the connection, password of excessive length can trigger a buffer overflow in PHP, which can lead to a remote code execution vulnerability.

Directory Traversal vulnerability in Mgt-commerce CloudPanel v.2.0.0 thru v.2.4.0 allows a remote attacker to obtain sensitive information and execute arbitrary code via the service parameter of the load-logfiles function.

A buffer overflow issue was discovered in ZOOK solution(remote administration tool) through processing 'ConnectMe' command while parsing a crafted OUTERIP value because of missing boundary check. This vulnerability allows the attacker to execute remote arbitrary command.

A vulnerability in agent program of HelpU remote control solution could allow an authenticated remote attacker to execute arbitrary commands This vulnerability is due to insufficient input santization when communicating customer process.