An issue was discovered in Honeywell XL Web II controller XL1000C500 XLWebExe-2-01-00 and prior, and XLWeb 500 XLWebExe-1-02-08 and prior. A user without authenticating can make a directory traversal attack by accessing a specific URL.

Honeywell HDZP252DI 1.00.HW02.4 and HBW2PER1 1.000.HW01.3 devices allow a video replay attack after ARP cache poisoning has been achieved.

The following versions of MAXPRO VMS and NVR, MAXPRO VMS:HNMSWVMS prior to Version VMS560 Build 595 T2-Patch, HNMSWVMSLT prior to Version VMS560 Build 595 T2-Patch, MAXPRO NVR: MAXPRO NVR XE prior to Version NVR 5.6 Build 595 T2-Patch, MAXPRO NVR SE prior to Version NVR 5.6 Build 595 T2-Patch, MAXPRO NVR PE prior to Version NVR 5.6 Build 595 T2-Patch, and MPNVRSWXX prior to Version NVR 5.6 Build 595 T2-Patch are vulnerable to an unsafe deserialization of untrusted data. An attacker may be able to remotely modify deserialized data without authentication using a specially crafted web request, resulting in remote code execution.

Honeywell equIP series and Performance series IP cameras and recorders, A vulnerability exists in the affected products where IP cameras and recorders have a potential replay attack vulnerability as a weak authentication method is retained for compatibility with legacy products.

Improper Input Validation vulnerability in Honeywell PM43 on 32 bit, ARM (Printer web page modules) allows Command Injection.This issue affects PM43 versions prior to P10.19.050004. Update to the latest available firmware version of the respective printers to version MR19.5 (e.g. P10.19.050006).

Multiple heap-based buffer overflow vulnerabilities exist in Honeywell Experion PKS all versions prior to R400.6, all versions prior to R410.6, and all versions prior to R430.2 modules, which could lead to possible remote code execution or denial of service. Honeywell strongly encourages and recommends all customers running unsupported versions of EKPS prior to R400 to upgrade to a supported version.

Server or Console Station DoS due to heap overflow occurring during the handling of a specially crafted message for a specific configuration operation.  See Honeywell Security Notification for recommendations on upgrading and versioning.

Controller DoS due to stack overflow when decoding a message from the server.  See Honeywell Security Notification for recommendations on upgrading and versioning.

Experion server DoS due to heap overflow occurring during the handling of a specially crafted message for a specific configuration operation.  See Honeywell Security Notification for recommendations on upgrading and versioning.

Honeywell Notifier Web Server (NWS) Version 3.50 is vulnerable to a path traversal attack, which allows an attacker to bypass access to restricted directories. Honeywell has released a firmware update to address the problem.

Honeywell Experion PKS Safety Manager (SM and FSC) through 2022-05-06 has Insufficient Verification of Data Authenticity. According to FSCT-2022-0053, there is a Honeywell Experion PKS Safety Manager insufficient logic security controls issue. The affected components are characterized as: Honeywell FSC runtime (FSC-CPU, QPP), Honeywell Safety Builder. The potential impact is: Remote Code Execution, Denial of Service. The Honeywell Experion PKS Safety Manager family of safety controllers utilize the unauthenticated Safety Builder protocol (FSCT-2022-0051) for engineering purposes, including downloading projects and control logic to the controller. Control logic is downloaded to the controller on a block-by-block basis. The logic that is downloaded consists of FLD code compiled to native machine code for the CPU module (which applies to both the Safety Manager and FSC families). Since this logic does not seem to be cryptographically authenticated, it allows an attacker capable of triggering a logic download to execute arbitrary machine code on the controller's CPU module in the context of the runtime. While the researchers could not verify this in detail, the researchers believe that the microprocessor underpinning the FSC and Safety Manager CPU modules is incapable of offering memory protection or privilege separation capabilities which would give an attacker full control of the CPU module. There is no authentication on control logic downloaded to the controller. Memory protection and privilege separation capabilities for the runtime are possibly lacking. The researchers confirmed the issues in question on Safety Manager R145.1 and R152.2 but suspect the issue affects all FSC and SM controllers and associated Safety Builder versions regardless of software or firmware revision. An attacker who can communicate with a Safety Manager controller via the Safety Builder protocol can execute arbitrary code without restrictions on the CPU module, allowing for covert manipulation of control operations and implanting capabilities similar to the TRITON malware (MITRE ATT&CK software ID S1009). A mitigating factor with regards to some, but not all, of the above functionality is that these require the Safety Manager physical keyswitch to be in the right position.

Honeywell ControlEdge through R151.1 uses Hard-coded Credentials. According to FSCT-2022-0056, there is a Honeywell ControlEdge hardcoded credentials issue. The affected components are characterized as: SSH. The potential impact is: Remote code execution, manipulate configuration, denial of service. The Honeywell ControlEdge PLC and RTU product line exposes an SSH service on port 22/TCP. Login as root to this service is permitted and credentials for the root user are hardcoded without automatically changing them upon first commissioning. The credentials for the SSH service are hardcoded in the firmware. The credentials grant an attacker access to a root shell on the PLC/RTU, allowing for remote code execution, configuration manipulation and denial of service.

A file inclusion vulnerability exists in the confd.exe module in Honeywell Experion PKS R40x before R400.6, R41x before R410.6, and R43x before R430.2, which could lead to accepting an arbitrary file into the function, and potential information disclosure or remote code execution. Honeywell strongly encourages and recommends all customers running unsupported versions of EKPS prior to R400 to upgrade to a supported version.

Multiple stack-based buffer overflows in (1) HWOPOSScale.ocx and (2) HWOPOSSCANNER.ocx in Honeywell OPOS Suite before 1.13.4.15 allow remote attackers to execute arbitrary code via a crafted file that is improperly handled by the Open method.

The affected product is vulnerable to a heap-based buffer overflow, which may allow an attacker to manipulate memory with controlled values and remotely execute code on the OPC UA Tunneller (versions prior to 6.3.0.8233).

An arbitrary memory write vulnerability exists in the dual_onsrv.exe module in Honeywell Experion PKS R40x before R400.6, R41x before R410.6, and R43x before R430.2, that could lead to possible remote code execution or denial of service. Honeywell strongly encourages and recommends all customers running unsupported versions of EKPS prior to R400 to upgrade to a supported version.

Stack-based buffer overflow in the HMIWeb Browser HSCDSPRenderDLL ActiveX control in Honeywell Process Solutions (HPS) Experion R2xx, R30x, R31x, and R400.x; Honeywell Building Solutions (HBS) Enterprise Building Manager R400 and R410.1; and Honeywell Environmental Combustion and Controls (ECC) SymmetrE R410.1 allows remote attackers to execute arbitrary code via unspecified vectors.

Controller may be loaded with malicious firmware which could enable remote code execution. See Honeywell Security Notification for recommendations on upgrading and versioning.

** UNSUPPORTED WHEN ASSIGNED ** [An attacker can capture an authenticating hash and utilize it to create new sessions. The hash is also a poorly salted MD5 hash, which could result in a successful brute force password attack. Impacted product is BCM-WEB version 3.3.X. Recommended fix: Upgrade to a supported product such as Alerton ACM.] Out of an abundance of caution, this CVE ID is being assigned to better serve our customers and ensure all who are still running this product understand that the product is end of life and should be removed or upgraded. 

Controller DoS may occur due to buffer overflow when an error is generated in response to a specially crafted message. See Honeywell Security Notification for recommendations on upgrading and versioning.

Honeywell Experion PKS C200, C200E, C300, and ACE controllers are vulnerable to improper neutralization of special elements in output, which may allow an attacker to remotely execute arbitrary code and cause a denial-of-service condition.

An SQL injection vulnerability in the pjActionGetUser function of PHPJabbers Cinema Booking System v2.0 allows attackers to manipulate database queries via the column parameter. Exploiting this flaw can lead to unauthorized information disclosure, privilege escalation, or database manipulation.

SQL injection vulnerability in the News Search (news_search) extension 0.1.0 for TYPO3 allows remote attackers to execute arbitrary SQL commands via unspecified vectors.

This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of Quest NetVault Backup 11.3.0.12. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of NVBUTransferHistory Get method requests. The issue results from the lack of proper validation of a user-supplied string before using it to construct SQL queries. An attacker can leverage this vulnerability to execute code in the context of the underlying database. Was ZDI-CAN-4230.

Multiple SQL injection vulnerabilities in D-Link DSR-150 with firmware before 1.08B44; DSR-150N with firmware before 1.05B64; DSR-250 and DSR-250N with firmware before 1.08B44; and DSR-500, DSR-500N, DSR-1000, and DSR-1000N with firmware before 1.08B77 allow remote attackers to execute arbitrary SQL commands via the password to (1) the login.authenticate function in share/lua/5.1/teamf1lualib/login.lua or (2) captivePortal.lua.

H.H.G Multistore v5.1.0 and below was discovered to contain a SQL injection vulnerability via /admin/admin.php?module=admin_group_edit&agID.

JFinalOA before v2025.01.01 was discovered to contain a SQL injection vulnerability via the component validRoleKey?sysRole.key.

The Email Subscribers by Icegram Express – Email Marketing, Newsletters, Automation for WordPress & WooCommerce plugin for WordPress is vulnerable to time-based SQL Injection via the db parameter in all versions up to, and including, 5.7.23 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.

A SQL injection vulnerability in the Boxtal (envoimoinscher) module for PrestaShop, after version 3.1.10, allows remote attackers to execute arbitrary SQL commands via the `key` GET parameter.

SQL injection vulnerability in display.asp in Civica Software Civica allows remote attackers to execute arbitrary SQL commands via the Entry parameter. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information.

SQL injection vulnerability in index.php in Digital Signage Xibo 1.4.2 allows remote attackers to execute arbitrary SQL commands via the displayid parameter.

SQL injection vulnerability in admin_check_user.asp in Motionborg Web Real Estate 2.1 and earlier allows remote attackers to execute arbitrary SQL commands via the username field (txtUserName parameter) and possibly other parameters. NOTE: some details were obtained from third party information.

SQL injection vulnerability in PHPFox before 3.6.0 (build4) allows remote attackers to execute arbitrary SQL commands via the search[gender] parameter to user/browse/view_/.

A vulnerability was found in SourceCodester Vehicle Management System 1.0 and classified as critical. Affected by this issue is some unknown functionality of the file updatebill.php. The manipulation of the argument id leads to sql injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-267458 is the identifier assigned to this vulnerability.

A SQL Injection vulnerability exists in the login form of Online Food Ordering System v1.0. The vulnerability arises because the input fields username and password are not properly sanitized, allowing attackers to inject malicious SQL queries to bypass authentication and gain unauthorized access.

WeGIA < 3.2.0 is vulnerable to SQL Injection in query_geracao_auto.php via the query parameter.

A vulnerability was found in itsourcecode Online Discussion Forum 1.0. It has been rated as critical. This issue affects some unknown processing of the file register_me.php. The manipulation of the argument eaddress leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-267407.

An SQL Injection vulnerabilty exists in Sourcecodester Online Project Time Management System 1.0 via the pid parameter in the load_file function.

An SQL Injection vulnerability exists in Sourcecodester Simple Chatbot Application 1.0 via the message parameter in Master.php.

Kashipara E-learning Management System v1.0 is vulnerable to SQL Injection in /admin/delete_student.php.

Unauthenticated SQL Injection (SQLi) vulnerability discovered in [GWA] AutoResponder WordPress plugin (versions <= 2.3), vulnerable at (&listid). No patched version available, plugin closed.

The id parameter in view_storage.php from Simple Cold Storage Management System 1.0 appears to be vulnerable to SQL injection attacks. A payload injects a SQL sub-query that calls MySQL's load_file function with a UNC file path that references a URL on an external domain. The application interacted with that domain, indicating that the injected SQL query was executed.

Projectworlds online-shopping-webvsite-in-php 1.0 suffers from a SQL Injection vulnerability via the "id" parameter in cart_add.php, No login is required.

H.H.G Multistore v5.1.0 and below was discovered to contain a SQL injection vulnerability via /admin/customers.php?page=1&cID.

A SQL Injection was found in /student_signup.php in kashipara E-learning Management System v1.0, which allows remote attackers to execute arbitrary SQL commands to get unauthorized database access via the username, firstname, lastname, and class_id parameters.

Dolibarr ERP/CRM before 5.0.3 is vulnerable to a SQL injection in user/index.php (search_supervisor and search_statut parameters).

WebsiteBaker v2.10.0 has a SQL injection vulnerability in /account/details.php.

Multiple SQL injection vulnerabilities in Free LAN In(tra|ter)net Portal (FLIP) before 1.0-RC3 allow remote attackers to execute arbitrary SQL commands via unspecified vectors. NOTE: some sources mention the escape_sqlData, implode_sql, and implode_sqlIn functions, but these are protection schemes, not the vulnerable functions.

A vulnerability was found in Netentsec NS-ASG Application Security Gateway 6.3. It has been classified as critical. This affects an unknown part of the file /admin/config_MT.php?action=delete. The manipulation of the argument Mid leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-266847. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A time-based SQL injection vulnerability in the login page of BoardRoom Limited Dividend Distribution Tax Election System Version v2.0 allows attackers to execute arbitrary code via a crafted input.