The network enabled distribution of Kura before 2.1.0 takes control over the device's firewall setup but does not allow IPv6 firewall rules to be configured. Still the Equinox console port 5002 is left open, allowing to log into Kura without any user credentials over unencrypted telnet and executing commands using the Equinox "exec" command. As the process is running as "root" full control over the device can be acquired. IPv6 is also left in auto-configuration mode, accepting router advertisements automatically and assigns a MAC address based IPv6 address.

EMC NetWorker may potentially be vulnerable to an unauthenticated remote code execution vulnerability in the Networker Client execution service (nsrexecd) when oldauth authentication method is used. An unauthenticated remote attacker could send arbitrary commands via RPC service to be executed on the host system with the privileges of the nsrexecd service, which runs with administrative privileges.

License Manager Service of YOKOGAWA products (CENTUM VP (R5.01.00 - R6.06.00), CENTUM VP Entry Class (R5.01.00 - R6.06.00), ProSafe-RS (R3.01.00 - R4.04.00), PRM (R4.01.00 - R4.02.00), B/M9000 VP(R7.01.01 - R8.02.03)) allows remote attackers to bypass access restriction to send malicious files to the PC where License Manager Service runs via unspecified vectors.

An authentication bypass vulnerability in anji-plus AJ-Report up to v1.4.2 allows unauthenticated attackers to execute arbitrary code via a crafted URL.

An Authentication Bypass vulnerability exists in Gitea before 1.5.0, which could let a malicious user gain privileges. If captured, the TOTP code for the 2FA can be submitted correctly more than once.

authentik is an open-source Identity Provider. Prior to versions 2023.8.4 and 2023.10.2, when the default admin user has been deleted, it is potentially possible for an attacker to set the password of the default admin user without any authentication. authentik uses a blueprint to create the default admin user, which can also optionally set the default admin users' password from an environment variable. When the user is deleted, the `initial-setup` flow used to configure authentik after the first installation becomes available again. authentik 2023.8.4 and 2023.10.2 fix this issue. As a workaround, ensure the default admin user (Username `akadmin`) exists and has a password set. It is recommended to use a very strong password for this user, and store it in a secure location like a password manager. It is also possible to deactivate the user to prevent any logins as akadmin.

An issue was discovered in dnaTools dnaLIMS 4-2015s13. dnaLIMS is vulnerable to unauthenticated command execution through an improperly protected administrative web shell (cgi-bin/dna/sysAdmin.cgi POST requests).

The Adaptive Security Device Management (ASDM) remote-management feature in Cisco Adaptive Security Appliance (ASA) Software 8.2.x before 8.2(5.46), 8.3.x before 8.3(2.39), 8.4.x before 8.4(6), 8.5.x before 8.5(1.18), 8.6.x before 8.6(1.12), 8.7.x before 8.7(1.7), 9.0.x before 9.0(3.1), and 9.1.x before 9.1(2.6) does not properly implement the authentication-certificate option, which allows remote attackers to bypass authentication via a TCP session to an ASDM interface, aka Bug ID CSCuh44815.

Improper Authentication vulnerability in Elementor Elementor Website Builder allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Elementor Website Builder: from n/a through 3.16.4.

AVTECH AVN801 DVR has a security bypass via the administration login captcha

Zoho ManageEngine Access Manager Plus before 4203 allows anyone to view a few data elements (e.g., access control details) and modify a few aspects of the application state.

Zoho ManageEngine PAM360 before build 5303 allows attackers to modify a few aspects of application state because of a filter bypass in which authentication is not required.

Adobe Commerce versions 2.4.7-p2, 2.4.6-p7, 2.4.5-p9, 2.4.4-p10 and earlier are affected by an Improper Authentication vulnerability that could result in privilege escalation. An attacker could exploit this vulnerability to gain unauthorized access or elevated privileges within the application. Exploitation of this issue does not require user interaction.

A vulnerability in the web-based GUI of Cisco Prime Home could allow an unauthenticated, remote attacker to bypass authentication and execute actions with administrator privileges. The vulnerability is due to a processing error in the role-based access control (RBAC) of URLs. An attacker could exploit this vulnerability by sending API commands via HTTP to a particular URL without prior authentication. An exploit could allow the attacker to perform any actions in Cisco Prime Home with administrator privileges. This vulnerability affects Cisco Prime Home versions from 6.3.0.0 to the first fixed release 6.5.0.1. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. Cisco Bug IDs: CSCvb49837.

An exploitable vulnerability exists in the generation of authentication token functionality of Circle with Disney. Specially crafted network packets can cause a valid authentication token to be returned to the attacker resulting in authentication bypass. An attacker can send a series of packets to trigger this vulnerability.

The authentication algorithm of the WebHMI portal is sound, but the implemented mechanism can be bypassed as the result of a separate weakness that is primary to the authentication error.

Unspecified vulnerability in a cryptographic feature in MailEnable Standard Edition before 1.93, Professional Edition before 1.73, and Enterprise Edition before 1.21 leads to "weakened authentication security" with unknown impact and attack vectors. NOTE: due to lack of details, it is not clear whether this is the same as CVE-2006-1792.

An issue in compop.ca ONLINE MALL v.3.5.3 allows a remote attacker to execute arbitrary code via the rid, tid, et, and ts parameters.

The impacted products, when configured to use SSO, are affected by an improper authentication vulnerability. This vulnerability allows the application to accept manual entry of any active directory (AD) account provisioned in the application without supplying a password, resulting in access to the application as the supplied AD account, with all associated privileges.

OpUtils in Zoho ManageEngine OpManager 12.5 before 125490 mishandles authentication for a few audit directories.

A vulnerability in the web-based GUI of Cisco Mobility Express 1800 Series Access Points could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. The vulnerability is due to improper implementation of authentication for accessing certain web pages using the GUI interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web interface of the affected system. A successful exploit could allow the attacker to bypass authentication and perform unauthorized configuration changes or issue control commands to the affected device. This vulnerability affects Cisco Mobility Express 1800 Series Access Points running a software version prior to 8.2.110.0. Cisco Bug IDs: CSCuy68219.

EMC Network Configuration Manager (NCM) 9.3.x, EMC Network Configuration Manager (NCM) 9.4.0.x, EMC Network Configuration Manager (NCM) 9.4.1.x, EMC Network Configuration Manager (NCM) 9.4.2.x contains an Improper Authentication vulnerability that could potentially be exploited by malicious users to compromise the affected system.

Cisco Linksys Routers EA2700, EA3500, E4200, EA4500: A bug can cause an unsafe TCP port to open which leads to unauthenticated access

In Apache httpd 2.2.x before 2.2.33 and 2.4.x before 2.4.26, use of the ap_get_basic_auth_pw() by third-party modules outside of the authentication phase may lead to authentication requirements being bypassed.

4MOSAn GCB Doctor’s login page has improper validation of Cookie, which allows an unauthenticated remote attacker to bypass authentication by code injection in cookie, and arbitrarily manipulate the system or interrupt services by upload and execution of arbitrary files.

The component controlla_login function in HotelDruid Hotel Management Software v3.0.3 generates a predictable session token, allowing attackers to bypass authentication via bruteforce attacks.

WAPM-1166D firmware Ver.1.2.7 and earlier, WAPM-APG600H firmware Ver.1.16.1 and earlier allows remote attackers to bypass authentication and access the configuration interface via unspecified vectors.

Fresenius Kabi Vigilant Software Suite (Mastermed Dashboard) version 2.0.1.3 allows user input to be validated on the client side without authentication by the server. The server should not rely on the correctness of the data because users might not support or block JavaScript or intentionally bypass the client-side checks. An attacker with knowledge of the service user could circumvent the client-side control and login with service privileges.

An issue was discovered in Talend Data Catalog before 7.3-20210930. After setting up SAML/OAuth, authentication is not correctly enforced on the native login page. Any valid user from the SAML/OAuth provider can be used as the username with an arbitrary password, and login will succeed.

The Supermicro BMC implementation allows remote attackers to bypass authentication and execute arbitrary IPMI commands by using cipher suite 0 (aka cipher zero) and an arbitrary password.

Unspecified vulnerability in Trend Micro ServerProtect 5.7 and 5.58 allows remote attackers to execute arbitrary code via vectors related to obtaining "administrative access to the RPC interface."

Apache Shiro before 1.8.0, when using Apache Shiro with Spring Boot, a specially crafted HTTP request may cause an authentication bypass. Users should update to Apache Shiro 1.8.0.

An issue was discovered on NETGEAR WNR1000V4 1.1.0.54 devices. The web management interface (setup.cgi) has an authentication bypass and other problems that ultimately allow an attacker to remotely compromise the device from a malicious webpage. The attacker sends an FW_remote.htm&todo=cfg_init request without a cookie, reads the Set-Cookie header in the 401 Unauthorized response, and then repeats the FW_remote.htm&todo=cfg_init request with the specified cookie.

Xiaongmai AHB7008T-MH-V2, AHB7804R-ELS, AHB7804R-MH-V2, AHB7808R-MS-V2, AHB7808R-MS, AHB7808T-MS-V2, AHB7804R-LMS, HI3518_50H10L_S39 V4.02.R11.7601.Nat.Onvif.20170420, V4.02.R11.Nat.Onvif.20160422, V4.02.R11.7601.Nat.Onvif.20170424, V4.02.R11.Nat.Onvif.20170327, V4.02.R11.Nat.Onvif.20161205, V4.02.R11.Nat.20170301, V4.02.R12.Nat.OnvifS.20170727 is affected by a backdoor in the macGuarder and dvrHelper binaries of DVR/NVR/IP camera firmware due to static root account credentials in the system.

An issue was discovered in LemonLDAP::NG (aka lemonldap-ng) 2.0.13. When using the RESTServer plug-in to operate a REST password validation service (for another LemonLDAP::NG instance, for example) and using the Kerberos authentication method combined with another method with the Combination authentication plug-in, any password will be recognized as valid for an existing user.

On Jooan IP Camera A5 2.3.36 devices, an insecure FTP server does not require authentication, which allows remote attackers to read or replace core system files including those used for authentication (such as passwd and shadow). This can be abused to take full root level control of the device.

Improper Authentication vulnerability in Apache Solr. Solr instances using the PKIAuthenticationPlugin, which is enabled by default when Solr Authentication is used, are vulnerable to Authentication bypass. A fake ending at the end of any Solr API URL path, will allow requests to skip Authentication while maintaining the API contract with the original URL Path. This fake ending looks like an unprotected API path, however it is stripped off internally after authentication but before API routing. This issue affects Apache Solr: from 5.3.0 before 8.11.4, from 9.0.0 before 9.7.0. Users are recommended to upgrade to version 9.7.0, or 8.11.4, which fix the issue.

Belkin N900 router (F9K1104v1) contains an Authentication Bypass using "Javascript debugging".

An authentication bypass exists in the web management interface in Belkin F5D8236-4 v2.

Netgear WNR1000v3 with firmware before 1.0.2.60 contains an Authentication Bypass via the NtgrBak key.

The Sierra Wireless AirLink Raven X EV-DO gateway 4221_4.0.11.003 and 4228_4.0.11.003 allows remote attackers to reprogram the firmware via a replay attack using UDP ports 17336 and 17388.

Undocumented TELNET service in TRENDnet TEW-691GR and TEW-692GR when a web page named backdoor contains an HTML parameter of password and a value of j78G¬DFdg_24Mhw3.

Cisco Linksys E4200 1.0.05 Build 7 devices contain a Security Bypass Vulnerability which could allow remote attackers to gain unauthorized access.

An Authentication Bypass vulnerability exists in NETGEAR Centria WNDR4700 Firmware 1.0.0.34 in http://<router_ip>/apply.cgi?/hdd_usr_setup.htm that when visited by any user, authenticated or not, causes the router to no longer require a password to access the web administration portal.

NETGEAR Centria WNDR4700 devices with firmware 1.0.0.34 allow authentication bypass.

Monkey HTTP Daemon: broken user name authentication

VMware vCenter Server 4.0 before Update 4b and 4.1 before Update 3a, VMware VirtualCenter 2.5, VMware vSphere Client 4.0 before Update 4b and 4.1 before Update 3a, VMware VI-Client 2.5, VMware ESXi 3.5 through 4.1, and VMware ESX 3.5 through 4.1 do not properly implement the management authentication protocol, which allow remote servers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors.

It was possible to bypass 2FA for LDAP users and access some specific pages with Basic Authentication in GitLab 14.1.1 and above.

basic/BasicAuthProvider.java in AuthGuard before 0.9.0 allows authentication via an inactive identifier.

An issue was discovered in the ALU unit of the OR1200 (aka OpenRISC 1200) processor 2011-09-10 through 2015-11-11. The overflow flag is not being updated correctly for the subtract instruction, which results in an incorrect value in the overflow flag. Any software that relies on this flag may experience corruption in execution.