IBM Security Guardium 11.2 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 196279.

The weak password on the web user interface can be exploited via HTTP or HTTPS. Once such access has been obtained, the other passwords can be changed. The weak password on Linux accounts can be accessed via SSH or Telnet, the former of which is by default enabled on trusted interfaces. While the SSH service does not support root login, a user logging in using either of the other Linux accounts may elevate to root access using the su command if they have access to the associated password.

IBM Security Privileged Identity Manager Virtual Appliance 2.2.1 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 145236.

Weak Password Requirements in GitHub repository thorsten/phpmyfaq prior to 3.1.12.

Open Dental before version 18.4 installs a mysql database and uses the default credentials of "root" with a blank password. This allows anyone on the network with access to the server to access all database information.

A vulnerability in the Gleez CMS 1.2.0 login page could allow an unauthenticated, remote attacker to perform multiple user enumerations, which can further help an attacker to perform login attempts in excess of the configured login attempt limit. The vulnerability is due to insufficient server-side access control and login attempt limit enforcement. An attacker could exploit this vulnerability by sending modified login attempts to the Portal login page. An exploit could allow the attacker to identify existing users and perform brute-force password attacks on the Portal, as demonstrated by navigating to the user/4 URI.

Airangel HSMX Gateway devices through 5.2.04 have Weak SSH Credentials.

The TIBCO EBX Web Server component of TIBCO Software Inc.'s TIBCO EBX, TIBCO EBX, TIBCO EBX, and TIBCO Product and Service Catalog powered by TIBCO EBX contains a vulnerability that under certain specific conditions allows an attacker to enter a password other than the legitimate password and it will be accepted as valid. Affected releases are TIBCO Software Inc.'s TIBCO EBX: versions 5.8.123 and below, TIBCO EBX: versions 5.9.3, 5.9.4, 5.9.5, 5.9.6, 5.9.7, 5.9.8, 5.9.9, 5.9.10, 5.9.11, 5.9.12, 5.9.13, and 5.9.14, TIBCO EBX: versions 6.0.0 and 6.0.1, and TIBCO Product and Service Catalog powered by TIBCO EBX: version 1.0.0.

A weak password requirement vulnerability exists in the Create New User function of MintHCM RELEASE 3.0.8, which could lead an attacker to easier password brute-forcing.

The telnet administrator service running on port 650 on Gigaset DX600A v41.00-175 devices does not implement any lockout or throttling functionality. This situation (together with the weak password policy that forces a 4-digit password) allows remote attackers to easily obtain administrative access via brute-force attacks.

The web management interface of the device allows the administrator username and password to be set to blank values. Once applied, the device permits authentication with empty credentials over the web management interface and Telnet service. This effectively disables authentication across all critical management channels, allowing any network-adjacent attacker to gain full administrative control without credentials.

IBM Security Guardium Big Data Intelligence (SonarG) 3.1 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 137772.

Weak Password Requirements in GitHub repository janeczku/calibre-web prior to 0.6.20.

IBM Tivoli Endpoint Manager (IBM BigFix 9.2 and 9.5) does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 123861.

BF-OS version 3.x up to and including 3.83 do not enforce strong passwords which may allow a remote attacker to brute-force the device password.

IBM Robotic Process Automation 21.0.0, 21.0.1, and 21.0.2 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 230634.

Lazy Mouse server enforces weak password requirements and doesn't implement rate limiting, allowing remote unauthenticated users to easily and quickly brute force the PIN and execute arbitrary commands. CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

In Daybyday CRM, versions 1.1 through 2.2.0 enforce weak password requirements in the user update functionality. A user with privileges to update his password could change it to a weak password, such as those with a length of a single character. This may allow an attacker to brute-force users’ passwords with minimal to no computational effort.

Iteris Vantage Velocity Field Unit 2.3.1 and 2.4.2 devices have two users that are not documented and are configured with weak passwords (User bluetooth, password bluetooth; User eclipse, password eclipse). Also, bluetooth is the root password.

The OKLOK (3.1.1) mobile companion app for Fingerprint Bluetooth Padlock FB50 (2.3) has weak password requirements combined with improper restriction of excessive authentication attempts, which could allow a remote attacker to discover user credentials and obtain access via a brute force attack.

In Moxa PT-7528 series firmware, Version 4.0 or lower, and PT-7828 series firmware, Version 3.9 or lower, the application utilizes weak password requirements, which may allow an attacker to gain unauthorized access.

An issue was discovered in Kaseya Unitrends Backup Appliance before 10.5.5. The password for the PostgreSQL wguest account is weak.

QaTraq 6.9.2 ships with administrative account credentials which are enabled in default installations and permit immediate login via the web application login page. Because the account provides administrative privileges in the default configuration, an attacker who can reach the login page can gain administrative access.

ECOA BAS controller uses weak set of default administrative credentials that can be easily guessed in remote password attacks and gain full control of the system.

IBM Security Identity Governance and Intelligence 5.2.6 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 175423.

IBM Maximo Asset Management 7.6.1.2 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 210892.

InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 does not enforce an efficient password policy. This may allow an attacker with obtained user credentials to enumerate passwords and impersonate other application users and perform operations on their behalf.

Versions of the Official registry Docker images through 2.7.0 contain a blank password for the root user. Systems deployed using affected versions of the registry container may allow a remote attacker to achieve root access with a blank password.

An issue in the password change function of Silverpeas v6.4.2 and lower allows for the bypassing of password complexity requirements.

Askey AP5100W_Dual_SIG_1.01.097 and all prior versions use a weak password at the Operating System (rlx-linux) level. This allows an attacker to gain unauthorized access as an admin or root user to the device Operating System via Telnet or SSH.

HCL AION  version 2 is affected by a Weak Password Policy vulnerability. This can  allow the use of easily guessable passwords, potentially resulting in unauthorized access

HCL Aftermarket DPC is affected by Weak Password Policy vulnerability, which makes it easier for attackers to guess weak passwords or use brute-force techniques to gain unauthorized access to user accounts.

A CWE-521: Weak Password Requirements vulnerability exists that could allow an attacker to gain control of the device when the attacker brute forces the password. Affected Products: C-Bus Network Automation Controller - LSS5500NAC (Versions prior to V1.10.0), Wiser for C-Bus Automation Controller - LSS5500SHAC (Versions prior to V1.10.0), Clipsal C-Bus Network Automation Controller - 5500NAC (Versions prior to V1.10.0), Clipsal Wiser for C-Bus Automation Controller - 5500SHAC (Versions prior to V1.10.0), SpaceLogic C-Bus Network Automation Controller - 5500NAC2 (Versions prior to V1.10.0), SpaceLogic C-Bus Application Controller - 5500AC2 (Versions prior to V1.10.0)

The built-in web service for MOXA NPort IAW5000A-I/O firmware version 2.1 or lower does not require users to have strong passwords.

An issue was discovered on Thermo Fisher Ion Torrent OneTouch 2 INS1005527 devices. They run an SSH server accessible over the default port 22. The root account has a weak default password of ionadmin, and a password change policy for the root account is not enforced. Thus, an attacker with network connectivity can achieve root code execution. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

The NETGEAR Insight application before 2.42 for Android and iOS is affected by password mismanagement.

YMS VIS Pro is an information system for veterinary and food administration, veterinarians and farm. Due to a combination of improper method for system credentials generation and weak password policy, passwords can be easily guessed and enumerated through brute force attacks. Successful attacks can lead to unauthorised access and execution of operations based on assigned user permissions. This vulnerability affects VIS Pro in versions <= 3.3.0.6. This vulnerability has been mitigated by changes in authentication mechanisms and implementation of additional authentication layer and strong password policies.

An access control vulnerability in Hame SD1 Wi-Fi firmware <=V.20140224154640 allows an attacker to get system administrator through an open Telnet service.

Insufficient Password Policy.This issue affects BLU-IC2: through 1.19.5; BLU-IC4: through 1.19.5.

IBM Security Verify Governance 10.0.2 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts.

An issue was discovered in AvertX Auto focus Night Vision HD Indoor/Outdoor IP Dome Camera HD838 and Night Vision HD Indoor/Outdoor Mini IP Bullet Camera HD438. They do not require users to change the default password for the admin account. They only show a pop-up window suggesting a change but there's no enforcement. An administrator can click Cancel and proceed to use the device without changing the password. Additionally, they disclose the default username within the login.js script. Since many attacks for IoT devices, including malware and exploits, are based on the usage of default credentials, it makes these cameras an easy target for malicious actors.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. The "user" account has a blank password.

Weak default password cause vulnerability in SonicWall Email Security appliance which leads to attacker gain access to appliance database. This vulnerability affected Email Security Appliance version 10.0.2 and earlier.

IBM QRadar Network Packet Capture 7.3.0 - 7.3.3 Patch 1 and 7.4.0 GA does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 166803.

IBM Security Key Lifecycle Manager 3.0 and 3.0.1 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 166626.

IBM Intelligent Operations Center (IOC) 5.1.0 through 5.2.0 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 157012.

RSA Archer, versions prior to 6.6 P2 (6.6.0.2), contain an improper authentication vulnerability. The vulnerability allows sysadmins to create user accounts with insufficient credentials. Unauthenticated attackers could gain unauthorized access to the system using those accounts.

A CWE-521: Weak Password Requirements vulnerability exists in Easergy Builder (Version 1.4.7.2 and older) which could allow an attacker to compromise a user account.

In Moxa EDS-G516E Series firmware, Version 5.2 or lower, weak password requirements may allow an attacker to gain access using brute force.