Honeywell Experion PKS Safety Manager (SM and FSC) through 2022-05-06 has Insufficient Verification of Data Authenticity. According to FSCT-2022-0053, there is a Honeywell Experion PKS Safety Manager insufficient logic security controls issue. The affected components are characterized as: Honeywell FSC runtime (FSC-CPU, QPP), Honeywell Safety Builder. The potential impact is: Remote Code Execution, Denial of Service. The Honeywell Experion PKS Safety Manager family of safety controllers utilize the unauthenticated Safety Builder protocol (FSCT-2022-0051) for engineering purposes, including downloading projects and control logic to the controller. Control logic is downloaded to the controller on a block-by-block basis. The logic that is downloaded consists of FLD code compiled to native machine code for the CPU module (which applies to both the Safety Manager and FSC families). Since this logic does not seem to be cryptographically authenticated, it allows an attacker capable of triggering a logic download to execute arbitrary machine code on the controller's CPU module in the context of the runtime. While the researchers could not verify this in detail, the researchers believe that the microprocessor underpinning the FSC and Safety Manager CPU modules is incapable of offering memory protection or privilege separation capabilities which would give an attacker full control of the CPU module. There is no authentication on control logic downloaded to the controller. Memory protection and privilege separation capabilities for the runtime are possibly lacking. The researchers confirmed the issues in question on Safety Manager R145.1 and R152.2 but suspect the issue affects all FSC and SM controllers and associated Safety Builder versions regardless of software or firmware revision. An attacker who can communicate with a Safety Manager controller via the Safety Builder protocol can execute arbitrary code without restrictions on the CPU module, allowing for covert manipulation of control operations and implanting capabilities similar to the TRITON malware (MITRE ATT&CK software ID S1009). A mitigating factor with regards to some, but not all, of the above functionality is that these require the Safety Manager physical keyswitch to be in the right position.

Honeywell ControlEdge through R151.1 uses Hard-coded Credentials. According to FSCT-2022-0056, there is a Honeywell ControlEdge hardcoded credentials issue. The affected components are characterized as: SSH. The potential impact is: Remote code execution, manipulate configuration, denial of service. The Honeywell ControlEdge PLC and RTU product line exposes an SSH service on port 22/TCP. Login as root to this service is permitted and credentials for the root user are hardcoded without automatically changing them upon first commissioning. The credentials for the SSH service are hardcoded in the firmware. The credentials grant an attacker access to a root shell on the PLC/RTU, allowing for remote code execution, configuration manipulation and denial of service.

The affected products are vulnerable to an unauthenticated API endpoint exposure, which may allow an attacker to remotely change the "forgot password" recovery email address.

Honeywell HDZP252DI 1.00.HW02.4 and HBW2PER1 1.000.HW01.3 devices allow a video replay attack after ARP cache poisoning has been achieved.

Honeywell Experion PKS C200, C200E, C300, and ACE controllers are vulnerable to improper neutralization of special elements in output, which may allow an attacker to remotely execute arbitrary code and cause a denial-of-service condition.

LenelS2 NetBox access control and event monitoring system was discovered to contain an unauthenticated RCE in versions prior to and including 5.6.1, which allows an attacker to execute malicious commands with elevated permissions.

LenelS2 NetBox access control and event monitoring system was discovered to contain Hardcoded Credentials in versions prior to and including 5.6.1 which allows an attacker to bypass authentication requirements.

** UNSUPPORTED WHEN ASSIGNED ** [An attacker can capture an authenticating hash and utilize it to create new sessions. The hash is also a poorly salted MD5 hash, which could result in a successful brute force password attack. Impacted product is BCM-WEB version 3.3.X. Recommended fix: Upgrade to a supported product such as Alerton ACM.] Out of an abundance of caution, this CVE ID is being assigned to better serve our customers and ensure all who are still running this product understand that the product is end of life and should be removed or upgraded. 

Controller DoS may occur due to buffer overflow when an error is generated in response to a specially crafted message. See Honeywell Security Notification for recommendations on upgrading and versioning.

Server or Console Station DoS due to heap overflow occurring during the handling of a specially crafted message for a specific configuration operation.  See Honeywell Security Notification for recommendations on upgrading and versioning.

Controller DoS due to stack overflow when decoding a message from the server.  See Honeywell Security Notification for recommendations on upgrading and versioning.

The following versions of MAXPRO VMS and NVR, MAXPRO VMS:HNMSWVMS prior to Version VMS560 Build 595 T2-Patch, HNMSWVMSLT prior to Version VMS560 Build 595 T2-Patch, MAXPRO NVR: MAXPRO NVR XE prior to Version NVR 5.6 Build 595 T2-Patch, MAXPRO NVR SE prior to Version NVR 5.6 Build 595 T2-Patch, MAXPRO NVR PE prior to Version NVR 5.6 Build 595 T2-Patch, and MPNVRSWXX prior to Version NVR 5.6 Build 595 T2-Patch contain an SQL injection vulnerability that could give an attacker remote unauthenticated access to the web user interface with administrator-level privileges.

The following versions of MAXPRO VMS and NVR, MAXPRO VMS:HNMSWVMS prior to Version VMS560 Build 595 T2-Patch, HNMSWVMSLT prior to Version VMS560 Build 595 T2-Patch, MAXPRO NVR: MAXPRO NVR XE prior to Version NVR 5.6 Build 595 T2-Patch, MAXPRO NVR SE prior to Version NVR 5.6 Build 595 T2-Patch, MAXPRO NVR PE prior to Version NVR 5.6 Build 595 T2-Patch, and MPNVRSWXX prior to Version NVR 5.6 Build 595 T2-Patch are vulnerable to an unsafe deserialization of untrusted data. An attacker may be able to remotely modify deserialized data without authentication using a specially crafted web request, resulting in remote code execution.

Honeywell Notifier Web Server (NWS) Version 3.50 is vulnerable to a path traversal attack, which allows an attacker to bypass access to restricted directories. Honeywell has released a firmware update to address the problem.

Improper Input Validation vulnerability in Honeywell PM43 on 32 bit, ARM (Printer web page modules) allows Command Injection.This issue affects PM43 versions prior to P10.19.050004. Update to the latest available firmware version of the respective printers to version MR19.5 (e.g. P10.19.050006).

The affected product is vulnerable to a heap-based buffer overflow, which may allow an attacker to manipulate memory with controlled values and remotely execute code on the OPC UA Tunneller (versions prior to 6.3.0.8233).

Experion server DoS due to heap overflow occurring during the handling of a specially crafted message for a specific configuration operation.  See Honeywell Security Notification for recommendations on upgrading and versioning.

Honeywell equIP series and Performance series IP cameras and recorders, A vulnerability exists in the affected products where IP cameras and recorders have a potential replay attack vulnerability as a weak authentication method is retained for compatibility with legacy products.

The Emerson ROC and FloBoss RTU product lines through 2022-05-02 perform insecure filesystem operations. They utilize the ROC protocol (4000/TCP, 5000/TCP) for communications between a master terminal and RTUs. Opcode 203 of this protocol allows a master terminal to transfer files to and from the flash filesystem and carrying out arbitrary file and directory read, write, and delete operations.

An arbitrary file upload vulnerability in Trend Micro Apex Central could allow an unauthenticated remote attacker to upload an arbitrary file which could lead to remote code execution.

A remote code execution vulnerability was discovered on Western Digital My Cloud devices where an attacker could trick a NAS device into loading through an unsecured HTTP call. This was a result insufficient verification of calls to the device. The vulnerability was addressed by disabling checks for internet connectivity using HTTP.

Insufficient Verification of Data Authenticity vulnerability in TECNO Mobile com.Afmobi.Boomplayer allows Authentication Bypass.This issue affects com.Afmobi.Boomplayer: 7.4.63.

Rack::Session is a session management implementation for Rack. From 2.0.0 to before 2.1.2, Rack::Session::Cookie incorrectly handles decryption failures when configured with secrets:. If cookie decryption fails, the implementation falls back to a default decoder instead of rejecting the cookie. This allows an unauthenticated attacker to supply a crafted session cookie that is accepted as valid session data without knowledge of any configured secret. Because this mechanism is used to load session state, an attacker can manipulate session contents and potentially gain unauthorized access. This vulnerability is fixed in 2.1.2.

The `fetch()` API and navigation incorrectly shared the same cache, as the cache key did not include the optional headers `fetch()` may contain. Under the correct circumstances, an attacker may have been able to poison the local browser cache by priming it with a `fetch()` response controlled by the additional headers. Upon navigation to the same URL, the user would see the cached response instead of the expected response. This vulnerability affects Firefox < 123.

OpenFGA is a high-performance and flexible authorization/permission engine built for developers and inspired by Google Zanzibar. In versions prior to 1.13.1, under specific conditions, models using conditions with caching enabled can result in two different check requests producing the same cache key. This can result in OpenFGA reusing an earlier cached result for a different request. Users are affected if the model has relations which rely on condition evaluation andncaching is enabled. OpenFGA v1.13.1 contains a patch.

Insufficient type checks were employed prior to casting input data in SimpleXMLElement_exportNode and simplexml_import_dom. This issue affects HHVM versions prior to 3.9.5, all versions between 3.10.0 and 3.12.3 (inclusive), and all versions between 3.13.0 and 3.14.1 (inclusive).

OpenClaw versions prior to 2026.2.2 fail to validate webhook secrets in Telegram webhook mode (must be enabled), allowing unauthenticated HTTP POST requests to the webhook endpoint that trust attacker-controlled JSON payloads. Remote attackers can forge Telegram updates by spoofing message.from.id and chat.id fields to bypass sender allowlists and execute privileged bot commands.

Thunderbird ignored paths when checking the validity of navigations in a frame. This vulnerability was fixed in Firefox 141, Firefox ESR 140.1, Thunderbird 141, and Thunderbird 140.1.

OpenClaw before 2026.4.10 contains an input validation vulnerability that allows external hook metadata to be enqueued as trusted system events. Attackers can supply malicious hook names to escalate untrusted input into higher-trust agent context.

Affected devices beacon to eCharge cloud infrastructure asking if there are any command they should run. This communication is established over an insecure channel since peer verification is disabled everywhere. Therefore, remote unauthenticated users  suitably positioned on the network between an EV charger controller and eCharge infrastructure can execute arbitrary commands with elevated privileges on affected devices. This issue affects cph2_echarge_firmware: through 2.0.4.

Traefik is a golang, Cloud Native Application Proxy. When a HTTP request is processed by Traefik, certain HTTP headers such as X-Forwarded-Host or X-Forwarded-Port are added by Traefik before the request is routed to the application. For a HTTP client, it should not be possible to remove or modify these headers. Since the application trusts the value of these headers, security implications might arise, if they can be modified. For HTTP/1.1, however, it was found that some of theses custom headers can indeed be removed and in certain cases manipulated. The attack relies on the HTTP/1.1 behavior, that headers can be defined as hop-by-hop via the HTTP Connection header. This issue has been addressed in release versions 2.11.9 and 3.1.3. Users are advised to upgrade. There are no known workarounds for this vulnerability.

The npm ci command in npm 7.x and 8.x through 8.1.3 proceeds with an installation even if dependency information in package-lock.json differs from package.json. This behavior is inconsistent with the documentation, and makes it easier for attackers to install malware that was supposed to have been blocked by an exact version match requirement in package-lock.json. NOTE: The npm team believes this is not a vulnerability. It would require someone to socially engineer package.json which has different dependencies than package-lock.json. That user would have to have file system or write access to change dependencies. The npm team states preventing malicious actors from socially engineering or gaining file system access is outside the scope of the npm CLI.

RSFirewall tries to identify the original IP address by looking at different HTTP headers. A bypass is possible due to the way it is implemented.

The Motorola MDLC protocol through 2022-05-02 mishandles message integrity. It supports three security modes: Plain, Legacy Encryption, and New Encryption. In Legacy Encryption mode, traffic is encrypted via the Tiny Encryption Algorithm (TEA) block-cipher in ECB mode. This mode of operation does not offer message integrity and offers reduced confidentiality above the block level, as demonstrated by an ECB Penguin attack against any block ciphers.

Zoho ManageEngine ADSelfService Plus 6103 and prior is vulnerable to admin portal access-restriction bypass.

Pexip Infinity Connect before 1.8.0 omits certain provisioning authenticity checks. Thus, untrusted code may execute.

The Portable SDK for UPnP Devices is an SDK for development of UPnP device and control point applications. The server part of pupnp (libupnp) appears to be vulnerable to DNS rebinding attacks because it does not check the value of the `Host` header. This can be mitigated by using DNS revolvers which block DNS-rebinding attacks. The vulnerability is fixed in version 1.14.6 and later.

Matrix Tafnit v8 - CWE-646: Reliance on File Name or Extension of Externally-Supplied File

A code injection vulnerability exists in the scan_lib.bin functionality of AutomationDirect P3-550E 1.2.10.9. A specially crafted scan_lib.bin can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.

python-keystoneclient version 0.2.3 to 0.2.5 has middleware memcache signing bypass

An unauthenticated, remote attacker could upload malicious logic to the devices based on ProConOS/ProConOS eCLR in order to gain full control over the device.

An unauthenticated, remote attacker could upload malicious logic to devices based on ProConOS/ProConOS eCLR in order to gain full control over the device.

Apache HTTP Server 2.4.53 and earlier may not send the X-Forwarded-* headers to the origin server based on client side Connection header hop-by-hop mechanism. This may be used to bypass IP based authentication on the origin server/application.

JTEKT TOYOPUC PLCs through 2022-04-29 do not ensure data integrity. They utilize the unauthenticated CMPLink/TCP protocol for engineering purposes, including downloading projects and control logic to the PLC. Control logic is downloaded to the PLC on a block-by-block basis with a given memory address and a blob of machine code. The logic that is downloaded to the PLC is not cryptographically authenticated, allowing an attacker to execute arbitrary machine code on the PLC's CPU module in the context of the runtime. In the case of the PC10G-CPU, and likely for other CPU modules of the TOYOPUC family, a processor without MPU or MMU is used and this no memory protection or privilege-separation capabilities are available, giving an attacker full control over the CPU.

In JetBrains IntelliJ IDEA before 2023.3.2 code execution was possible in Untrusted Project mode via a malicious plugin repository specified in the project configuration

cpp-httplib is a C++11 single-file header-only cross platform HTTP/HTTPS library. Prior to 0.27.0, a vulnerability allows attacker-controlled HTTP headers to influence server-visible metadata, logging, and authorization decisions. An attacker can inject headers named REMOTE_ADDR, REMOTE_PORT, LOCAL_ADDR, LOCAL_PORT that are parsed into the request header multimap via read_headers() in httplib.h (headers.emplace), then the server later appends its own internal metadata using the same header names in Server::process_request without erasing duplicates. Because Request::get_header_value returns the first entry for a header key (id == 0) and the client-supplied headers are parsed before server-inserted headers, downstream code that uses these header names may inadvertently use attacker-controlled values. Affected files/locations: cpp-httplib/httplib.h (read_headers, Server::process_request, Request::get_header_value, get_header_value_u64) and cpp-httplib/docker/main.cc (get_client_ip, nginx_access_logger, nginx_error_logger). Attack surface: attacker-controlled HTTP headers in incoming requests flow into the Request.headers multimap and into logging code that reads forwarded headers, enabling IP spoofing, log poisoning, and authorization bypass via header shadowing. This vulnerability is fixed in 0.27.0.

Unauthenticated Arbitrary File Upload (upgrade_contents.php) in DB Electronica Telecomunicazioni S.p.A. Mozart FM Transmitter versions 30, 50, 100, 300, 500, 1000, 2000, 3000, 3500, 6000, 7000 allows an attacker to perform Missing signature validation allows uploading malicious firmware packages.  The firmware upgrade endpoint in `upgrade_contents.php` accepts arbitrary file uploads without validating file headers, cryptographic signatures, or enforcing .tgz format requirements, allowing malicious firmware injection. This endpoint also subsequently provides ways for arbitrary file uploads and subsequent remote code execution

In PHPJabbers Cleaning Business Software 1.0, lack of verification when changing an email address and/or password (on the Profile Page) allows remote attackers to take over accounts.