Honeywell HDZP252DI 1.00.HW02.4 and HBW2PER1 1.000.HW01.3 devices allow a video replay attack after ARP cache poisoning has been achieved.

The following versions of MAXPRO VMS and NVR, MAXPRO VMS:HNMSWVMS prior to Version VMS560 Build 595 T2-Patch, HNMSWVMSLT prior to Version VMS560 Build 595 T2-Patch, MAXPRO NVR: MAXPRO NVR XE prior to Version NVR 5.6 Build 595 T2-Patch, MAXPRO NVR SE prior to Version NVR 5.6 Build 595 T2-Patch, MAXPRO NVR PE prior to Version NVR 5.6 Build 595 T2-Patch, and MPNVRSWXX prior to Version NVR 5.6 Build 595 T2-Patch are vulnerable to an unsafe deserialization of untrusted data. An attacker may be able to remotely modify deserialized data without authentication using a specially crafted web request, resulting in remote code execution.

An attacker could potentially exploit this vulnerability, leading to the ability to modify files on Honeywell Experion ControlEdge VirtualUOC and ControlEdge UOC . This exploit could be used to write a file that may result in unexpected behavior based on configuration changes or updating of files that could result in subsequent execution of a malicious application if triggered. Honeywell recommends updating to the most recent version of the product. See Honeywell Security Notification for recommendations on upgrading and versioning. 

Honeywell equIP series and Performance series IP cameras and recorders, A vulnerability exists in the affected products where IP cameras and recorders have a potential replay attack vulnerability as a weak authentication method is retained for compatibility with legacy products.

Improper Input Validation vulnerability in Honeywell PM43 on 32 bit, ARM (Printer web page modules) allows Command Injection.This issue affects PM43 versions prior to P10.19.050004. Update to the latest available firmware version of the respective printers to version MR19.5 (e.g. P10.19.050006).

Server or Console Station DoS due to heap overflow occurring during the handling of a specially crafted message for a specific configuration operation.  See Honeywell Security Notification for recommendations on upgrading and versioning.

Controller DoS due to stack overflow when decoding a message from the server.  See Honeywell Security Notification for recommendations on upgrading and versioning.

Experion server DoS due to heap overflow occurring during the handling of a specially crafted message for a specific configuration operation.  See Honeywell Security Notification for recommendations on upgrading and versioning.

The following versions of MAXPRO VMS and NVR, MAXPRO VMS:HNMSWVMS prior to Version VMS560 Build 595 T2-Patch, HNMSWVMSLT prior to Version VMS560 Build 595 T2-Patch, MAXPRO NVR: MAXPRO NVR XE prior to Version NVR 5.6 Build 595 T2-Patch, MAXPRO NVR SE prior to Version NVR 5.6 Build 595 T2-Patch, MAXPRO NVR PE prior to Version NVR 5.6 Build 595 T2-Patch, and MPNVRSWXX prior to Version NVR 5.6 Build 595 T2-Patch contain an SQL injection vulnerability that could give an attacker remote unauthenticated access to the web user interface with administrator-level privileges.

Honeywell Notifier Web Server (NWS) Version 3.50 is vulnerable to a path traversal attack, which allows an attacker to bypass access to restricted directories. Honeywell has released a firmware update to address the problem.

Honeywell Experion PKS Safety Manager (SM and FSC) through 2022-05-06 has Insufficient Verification of Data Authenticity. According to FSCT-2022-0053, there is a Honeywell Experion PKS Safety Manager insufficient logic security controls issue. The affected components are characterized as: Honeywell FSC runtime (FSC-CPU, QPP), Honeywell Safety Builder. The potential impact is: Remote Code Execution, Denial of Service. The Honeywell Experion PKS Safety Manager family of safety controllers utilize the unauthenticated Safety Builder protocol (FSCT-2022-0051) for engineering purposes, including downloading projects and control logic to the controller. Control logic is downloaded to the controller on a block-by-block basis. The logic that is downloaded consists of FLD code compiled to native machine code for the CPU module (which applies to both the Safety Manager and FSC families). Since this logic does not seem to be cryptographically authenticated, it allows an attacker capable of triggering a logic download to execute arbitrary machine code on the controller's CPU module in the context of the runtime. While the researchers could not verify this in detail, the researchers believe that the microprocessor underpinning the FSC and Safety Manager CPU modules is incapable of offering memory protection or privilege separation capabilities which would give an attacker full control of the CPU module. There is no authentication on control logic downloaded to the controller. Memory protection and privilege separation capabilities for the runtime are possibly lacking. The researchers confirmed the issues in question on Safety Manager R145.1 and R152.2 but suspect the issue affects all FSC and SM controllers and associated Safety Builder versions regardless of software or firmware revision. An attacker who can communicate with a Safety Manager controller via the Safety Builder protocol can execute arbitrary code without restrictions on the CPU module, allowing for covert manipulation of control operations and implanting capabilities similar to the TRITON malware (MITRE ATT&CK software ID S1009). A mitigating factor with regards to some, but not all, of the above functionality is that these require the Safety Manager physical keyswitch to be in the right position.

Honeywell ControlEdge through R151.1 uses Hard-coded Credentials. According to FSCT-2022-0056, there is a Honeywell ControlEdge hardcoded credentials issue. The affected components are characterized as: SSH. The potential impact is: Remote code execution, manipulate configuration, denial of service. The Honeywell ControlEdge PLC and RTU product line exposes an SSH service on port 22/TCP. Login as root to this service is permitted and credentials for the root user are hardcoded without automatically changing them upon first commissioning. The credentials for the SSH service are hardcoded in the firmware. The credentials grant an attacker access to a root shell on the PLC/RTU, allowing for remote code execution, configuration manipulation and denial of service.

Honeywell Experion LX through 2022-05-06 has Missing Authentication for a Critical Function. According to FSCT-2022-0055, there is a Honeywell Experion LX Control Data Access (CDA) EpicMo protocol with unauthenticated functionality issue. The affected components are characterized as: Honeywell Control Data Access (CDA) EpicMo (55565/TCP). The potential impact is: Firmware manipulation, Denial of service. The Honeywell Experion LX Distributed Control System (DCS) utilizes the Control Data Access (CDA) EpicMo protocol (55565/TCP) for device diagnostics and maintenance purposes. This protocol does not have any authentication features, allowing any attacker capable of communicating with the ports in question to invoke (a subset of) desired functionality. There is no authentication functionality on the protocol in question. An attacker capable of invoking the protocols' functionalities could issue firmware download commands potentially allowing for firmware manipulation and reboot devices causing denial of service.

The affected product is vulnerable to a heap-based buffer overflow, which may allow an attacker to manipulate memory with controlled values and remotely execute code on the OPC UA Tunneller (versions prior to 6.3.0.8233).

Controller may be loaded with malicious firmware which could enable remote code execution. See Honeywell Security Notification for recommendations on upgrading and versioning.

** UNSUPPORTED WHEN ASSIGNED ** [An attacker can capture an authenticating hash and utilize it to create new sessions. The hash is also a poorly salted MD5 hash, which could result in a successful brute force password attack. Impacted product is BCM-WEB version 3.3.X. Recommended fix: Upgrade to a supported product such as Alerton ACM.] Out of an abundance of caution, this CVE ID is being assigned to better serve our customers and ensure all who are still running this product understand that the product is end of life and should be removed or upgraded. 

Controller DoS may occur due to buffer overflow when an error is generated in response to a specially crafted message. See Honeywell Security Notification for recommendations on upgrading and versioning.

In Honeywell WIN-PAK 4.7.2, Web and prior versions, the header injection vulnerability has been identified, which may allow remote code execution.

In GL.iNET GL-AR300M routers with firmware 3.216 it is possible to inject arbitrary shell commands through the OpenVPN client file upload functionality.

A vulnerability classified as critical was found in School Club Application System 1.0. This vulnerability affects a request to the file /scas/classes/Users.php?f=save_user. The manipulation with a POST request leads to privilege escalation. The attack can be initiated remotely and does not require authentication. The exploit has been disclosed to the public and may be used.

An unauthenticated Apache Traffic Control Traffic Ops user can send a request with a specially-crafted username to the POST /login endpoint of any API version to inject unsanitized content into the LDAP filter.

JetBrains YouTrack before 2021.3.23639 is vulnerable to Host header injection.

An issue was discovered on Samsung mobile devices with M(6.0) and N(7.x) software. SVoice allows arbitrary code execution by changing dynamic libraries. The Samsung ID is SVE-2017-9299 (September 2017).

The newspaper theme before 6.7.2 for WordPress has script injection via td_ads[header] to admin-ajax.php.

The gravitate-qa-tracker plugin through 1.2.1 for WordPress has PHP Object Injection.

neoan3-apps/template is a neoan3 minimal template engine. Versions prior to 1.1.1 have allowed for passing in closures directly into the template engine. As a result values that are callable are executed by the template engine. The issue arises if a value has the same name as a method or function in scope and can therefore be executed either by mistake or maliciously. In theory all users of the package are affected as long as they either deal with direct user input or database values. A multi-step attack on is therefore plausible. Version 1.1.1 has addressed this vulnerability. Unfortunately only working with hardcoded values is safe in prior versions. As this likely defeats the purpose of a template engine, please upgrade.

There is an object injection vulnerability in swfupload plugin for wordpress.

static/main-preload.js in Boost Note through 0.22.0 allows remote command execution. A remote attacker may send a crafted IPC message to the exposed vulnerable ipcRenderer IPC interface, which invokes the dangerous openExternal Electron API.

Zanata 3.0.0 through 3.1.2 has RCE due to EL interpolation in logging

vtiger CRM 5.4.0 and earlier contain a PHP Code Injection Vulnerability in 'vtigerolservice.php'.

AviatorScript through 5.2.7 allows code execution via an expression that is encoded with Byte Code Engineering Library (BCEL).

Eval injection vulnerability in the Module-Metadata module before 1.000015 for Perl allows remote attackers to execute arbitrary Perl code via the $Version value.

Apache Struts 2.0.0 through 2.3.15 allows remote attackers to execute arbitrary OGNL expressions via a parameter with a crafted (1) action:, (2) redirect:, or (3) redirectAction: prefix.

rubygem-openshift-origin-controller: API can be used to create applications via cartridge_cache.rb URI.prase() to perform command injection

WordPress W3 Total Cache Plugin 0.9.2.8 has a Remote PHP Code Execution Vulnerability

This openedx-translations repository contains translation files from Open edX repositories to be kept in sync with Transifex. Before moving to pulling translations from the openedx-translations repository via openedx-atlas, translations in the edx-platform repository were validated using edx-i18n-tools. This validation included protection against malformed translations and translations-based script injections. Prior to this patch, the validation implemented in the openedx-translations repository did not include the same protections. The maintainer inspected the translations in the edx-platform directory of both the main and open-release/redwood.master branches of the openedx-translations repository and found no evidence of exploited translation strings.

Certain NETGEAR devices are affected by server-side injection. This affects D7800 before 1.0.1.58, DM200 before 1.0.0.66, EX2700 before 1.0.1.56, EX6150v2 before 1.0.1.86, EX6100v2 before 1.0.1.86, EX6200v2 before 1.0.1.78, EX6250 before 1.0.0.110, EX6410 before 1.0.0.110, EX6420 before 1.0.0.110, EX6400v2 before 1.0.0.110, EX7300 before 1.0.2.144, EX6400 before 1.0.2.144, EX7320 before 1.0.0.110, EX7300v2 before 1.0.0.110, R7500v2 before 1.0.3.48, R7800 before 1.0.2.68, R8900 before 1.0.5.2, R9000 before 1.0.5.2, RAX120 before 1.0.1.90, RBK40 before 2.5.1.16, RBK20 before 2.5.1.16, RBR20 before 2.5.1.16, RBS20 before 2.5.1.16, RBK50 before 2.5.1.16, RBR50 before 2.5.1.16, RBS50 before 2.5.1.16, RBS50Y before 2.6.1.40, WN3000RPv2 before 1.0.0.78, WN3000RPv3 before 1.0.2.80, WNR2000v5 before 1.0.0.72, XR500 before 2.3.2.56, and XR700 before 1.0.1.20.

A Command Injection vulnerability exists in the getTopologyHistory service of the Apache Storm 2.x prior to 2.2.1 and Apache Storm 1.x prior to 1.2.4. A specially crafted thrift request to the Nimbus server allows Remote Code Execution (RCE) prior to authentication.

A CRLF injection vulnerability in E-Staff v5.1 allows attackers to insert Carriage Return (CR) and Line Feed (LF) characters into input fields, leading to HTTP response splitting and header manipulation.

Multiple argument injection vulnerabilities in Ansible before 1.6.7 allow remote attackers to execute arbitrary code by leveraging access to an Ansible managed host and providing a crafted fact, as demonstrated by a fact with (1) a trailing " src=" clause, (2) a trailing " temp=" clause, or (3) a trailing " validate=" clause accompanied by a shell command.

GLPI is a free asset and IT management software package. Starting in version 10.0.0 and prior to version 10.0.11, on PHP 7.4 only, the LDAP server configuration form can be used to execute arbitrary code previously uploaded as a GLPI document. Version 10.0.11 contains a patch for the issue.

GL-iNet products AR750/AR750S/AR300M/AR300M16/MT300N-V2/B1300/MT1300/SFT1200/X750 v4.3.11, MT3000/MT2500/AXT1800/AX1800/A1300/X300B v4.5.16, XE300 v4.3.16, E750 v4.3.12, AP1300/S1300 v4.3.13, and XE3000/X3000 v4.4 were discovered to contain insecure permissions in the endpoint /cgi-bin/glc. This vulnerability allows unauthenticated attackers to execute arbitrary code or possibly a directory traversal via crafted JSON data.

An issue discovered in skycaiji 2.8 allows attackers to run arbitrary code via crafted POST request to /index.php?s=/admin/develop/editor_save.

install/index.php in WebCalendar before 1.2.5 allows remote attackers to execute arbitrary code via the form_single_user_login parameter.

The default configuration of XSLTResourceStream.java is vulnerable to remote code execution via XSLT injection when processing input from an untrusted source without validation. Users are recommended to upgrade to versions 10.1.0, 9.18.0 or 8.16.0, which fix this issue.

An issue in Jumpserver before 2.6.2, before 2.5.4, before 2.4.5 allows attackers to create a connection token through an API which does not have access control and use it to access sensitive assets.

A vulnerability, which was classified as critical, has been found in code-projects Simple Shopping Cart 1.0. This issue affects some unknown processing of the file /Customers/save_order.php. The manipulation of the argument order_price leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

The DHCPv6 client (dhcp6c) as used in the dhcpv6 project through 2011-07-25 allows remote DHCP servers to execute arbitrary commands via shell metacharacters in a hostname obtained from a DHCP message.