Roxy-wi is an open source web interface for managing Haproxy, Nginx, Apache and Keepalived servers. A vulnerability in Roxy-wi allows a remote, unauthenticated attacker to bypass authentication and access admin functionality by sending a specially crafted HTTP request. This affects Roxywi versions before 6.1.1.0. Users are advised to upgrade. There are no known workarounds for this issue.

BIG-IP configurations using Active Directory, LDAP, or Client Certificate LDAP for management authentication with multiple servers are exposed to a vulnerability which allows an authentication bypass. This can result in a complete compromise of the system. This issue only impacts specific engineering hotfixes using the aforementioned authentication configuration. NOTE: This vulnerability does not affect any of the BIG-IP major, minor or maintenance releases you obtained from downloads.f5.com. The affected Engineering Hotfix builds are as follows: Hotfix-BIGIP-14.1.0.3.0.79.6-ENG.iso, Hotfix-BIGIP-14.1.0.3.0.97.6-ENG.iso, Hotfix-BIGIP-14.1.0.3.0.99.6-ENG.iso, Hotfix-BIGIP-14.1.0.5.0.15.5-ENG.iso, Hotfix-BIGIP-14.1.0.5.0.36.5-ENG.iso, Hotfix-BIGIP-14.1.0.5.0.40.5-ENG.iso, Hotfix-BIGIP-14.1.0.6.0.11.9-ENG.iso, Hotfix-BIGIP-14.1.0.6.0.14.9-ENG.iso, Hotfix-BIGIP-14.1.0.6.0.68.9-ENG.iso, Hotfix-BIGIP-14.1.0.6.0.70.9-ENG.iso, Hotfix-BIGIP-14.1.2.0.11.37-ENG.iso, Hotfix-BIGIP-14.1.2.0.18.37-ENG.iso, Hotfix-BIGIP-14.1.2.0.32.37-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.46.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.14.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.16.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.34.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.97.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.99.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.105.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.111.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.115.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.122.4-ENG.iso, Hotfix-BIGIP-15.0.1.0.33.11-ENG.iso, Hotfix-BIGIP-15.0.1.0.48.11-ENG.iso

PR100088 Modbus gateway versions prior to Release R02 (or Software Version 1.1.13166) may allow an attacker to be able to change the password for an admin user who is currently or previously logged in, provided the device has not been restarted.

Improper Authentication vulnerability in upKeeper Solutions product upKeeper Manager allows Authentication Bypass.This issue affects upKeeper Manager: through 5.1.9.

HCL MyXalytics is affected by broken authentication. It allows attackers to compromise keys, passwords, and session tokens, potentially leading to identity theft and system control. This vulnerability arises from poor configuration, logic errors, or software bugs and can affect any application with access control, including databases, network infrastructure, and web applications.

An issue in Ocuco Innovation - REPORTSERVER.EXE v2.10.24.13 allows attackers to bypass authentication and escalate privileges to Administrator via a crafted TCP packet.

The web application portal of the Cobham EXPLORER 710, firmware version 1.07, allows unauthenticated access to port 5454. This could allow an unauthenticated, remote attacker to connect to this port via Telnet and execute 86 Attention (AT) commands, including some that provide unauthenticated, shell-like access to the device.

An issue in Ocuco Innovation - INNOVASERVICEINTF.EXE v2.10.24.17 allows attackers to bypass authentication and escalate privileges to Administrator via a crafted TCP packet.

A vulnerability has been found in TOTOLINK T10 4.1.8cu.5241_B20210927. Affected is an unknown function of the file /formLoginAuth.htm. The manipulation of the argument authCode with the input 1 leads to improper authentication. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been identified in SENTRON 7KM PAC3200 (All versions). Affected devices only provide a 4-digit PIN to protect from administrative access via Modbus TCP interface. Attackers with access to the Modbus TCP interface could easily bypass this protection by brute-force attacks or by sniffing the Modbus clear text communication.

Unverified Password Change in GitHub repository tsolucio/corebos prior to 8.

An issue in Ocuco Innovation - INVCLIENT.EXE v2.10.24.5 allows attackers to bypass authentication and escalate privileges to Administrator via a crafted TCP packet.

A vulnerability, which was classified as critical, was found in LB-LINK BL-AC1900, BL-AC2100_AZ3, BL-AC3600, BL-AX1800, BL-AX5400P and BL-WR9000 up to 20250702. Affected is the function reboot/restore of the file /cgi-bin/lighttpd.cgi of the component Web Interface. The manipulation leads to improper authentication. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 anyone can change the administrator and moderator passwords via the iso.3.6.1.4.1.3212.100.3.2.8.1 and iso.3.6.1.4.1.3212.100.3.2.8.2 OIDs. A remote, unauthenticated attacker can use this vulnerability to change the admin or moderator user's password and gain access to restricted areas on the HTTP interface.

Multiple Services such as VHS(Video History Server) and VCD(Video Clip Distributor) and Clips2 were discovered to be vulnerable to an unauthenticated arbitrary file read/write vulnerability due to missing input validation on filenames. A malicious attacker could read sensitive files from the filesystem or write/delete arbitrary files on the filesystem as well.

Nodebb is an open source Node.js based forum software. In affected versions incorrect logic present in the token verification step unintentionally allowed master token access to the API. The vulnerability has been patch as of v1.18.5. Users are advised to upgrade as soon as possible.

RustFS is a distributed object storage system built in Rust. In versions prior to 1.0.0-alpha.78, RustFS implements gRPC authentication using a hardcoded static token `"rustfs rpc"` that is publicly exposed in the source code repository, hardcoded on both client and server sides, non-configurable with no mechanism for token rotation, and universally valid across all RustFS deployments. Any attacker with network access to the gRPC port can authenticate using this publicly known token and execute privileged operations including data destruction, policy manipulation, and cluster configuration changes. Version 1.0.0-alpha.78 contains a fix for the issue.

ESPv2 is a service proxy that provides API management capabilities using Google Service Infrastructure. ESPv2 2.20.0 through 2.42.0 contains an authentication bypass vulnerability. API clients can craft a malicious `X-HTTP-Method-Override` header value to bypass JWT authentication in specific cases. ESPv2 allows malicious requests to bypass authentication if both the conditions are true: The requested HTTP method is **not** in the API service definition (OpenAPI spec or gRPC `google.api.http` proto annotations, and the specified `X-HTTP-Method-Override` is a valid HTTP method in the API service definition. ESPv2 will forward the request to your backend without checking the JWT. Attackers can craft requests with a malicious `X-HTTP-Method-Override` value that allows them to bypass specifying JWTs. Restricting API access with API keys works as intended and is not affected by this vulnerability. Upgrade deployments to release v2.43.0 or higher to receive a patch. This release ensures that JWT authentication occurs, even when the caller specifies `x-http-method-override`. `x-http-method-override` is still supported by v2.43.0+. API clients can continue sending this header to ESPv2.

handleIncomingPacket in conn.go in Pion DTLS before 1.5.2 lacks a check for application data with epoch 0, which allows remote attackers to inject arbitrary unencrypted data after handshake completion.

Insufficient authentication in the MQTT backend (broker) allows an attacker to access and even manipulate the telemetry data of the entire fleet of vehicles using the HopeChart HQT-401 telematics unit. Other models are possibly affected too. Multiple vulnerabilities were identified: - The MQTT backend does not require authentication, allowing unauthorized connections from an attacker. - The vehicles publish their telemetry data (e.g. GPS Location, speed, odometer, fuel, etc) as messages in public topics. The backend also sends commands to the vehicles as MQTT posts in public topics. As a result, an attacker can access the confidential data of the entire fleet that is managed by the backend. - The MQTT messages sent by the vehicles or the backend are not encrypted or authenticated. An attacker can create and post messages to impersonate a vehicle or the backend. The attacker could then, for example, send incorrect information to the backend about the vehicle's location. - The backend can inject data into a vehicle´s CAN bus by sending a specific MQTT message on a public topic. Because these messages are not authenticated or encrypted, an attacker could impersonate the backend, create a fake message and inject CAN data in any vehicle managed by the backend. The confirmed version is 201808021036, however further versions have been also identified as potentially impacted.

Meshtastic is an open source, off-grid, decentralized, mesh network. Meshtastic uses MQTT to communicate over an internet connection to a shared or private MQTT Server. Nodes can communicate directly via an internet connection or proxied through a connected phone (i.e., via bluetooth). Prior to version 2.5.1, multiple weaknesses in the MQTT implementation allow for authentication and authorization bypasses resulting in unauthorized control of MQTT-connected nodes. Version 2.5.1 contains a patch.

An insufficient authorization vulnerability in web component of EPMM prior to 12.1.0.1 allows an unauthorized attacker within the network to execute arbitrary commands on the underlying operating system of the appliance.

An issue was discovered on NETGEAR WNR1000V4 1.1.0.54 devices. The web management interface (setup.cgi) has an authentication bypass and other problems that ultimately allow an attacker to remotely compromise the device from a malicious webpage. The attacker sends an FW_remote.htm&todo=cfg_init request without a cookie, reads the Set-Cookie header in the 401 Unauthorized response, and then repeats the FW_remote.htm&todo=cfg_init request with the specified cookie.

The system application (com.transsion.kolun.aiservice) component does not perform an authentication check, which allows attackers to perform malicious exploitations and affect system services.

InfluxDB before 1.7.6 has an authentication bypass vulnerability in the authenticate function in services/httpd/handler.go because a JWT token may have an empty SharedSecret (aka shared secret).

Gotham Orbital-Simulator service prior to 0.692.0 was found to be vulnerable to a Path traversal issue allowing an unauthenticated user to read arbitrary files on the file system.

In MIELE XGW 3000 ZigBee Gateway before 2.4.0, the Password Change Function does not require knowledge of the old password. This can be exploited in conjunction with CVE-2019-20480.

Broken Authentication vulnerability in SoftLab Integrate Google Drive.This issue affects Integrate Google Drive: from n/a through 1.3.93.

Broken Authentication vulnerability discovered in OpenText™ iManager 3.2.6.0200. This vulnerability allows an attacker to manipulate certain parameters to bypass authentication.

An issue in the helper tool of Mailbutler GmbH Shimo VPN Client for macOS v5.0.4 allows attackers to bypass authentication via PID re-use.

Aspire-derived NEC PBXes, including the SV8100, SV9100, SL1100 and SL2100 with software releases 7.0 or higher contain the possibility if incorrectly configured to allow a blank username and password combination to be entered as a valid, successfully authenticating account.

**UNSUPPORTED WHEN ASSIGNED** An issue was discovered in BMC Remedy Mid Tier 7.6.04. An unauthenticated remote attacker is able to access any user account without using any password. NOTE: This vulnerability only affects products that are no longer supported by the maintainer and the impacted version for this vulnerability is 7.6.04 only.

On certain TOTOLINK Realtek SDK based routers, the CAPTCHA text can be retrieved via an {"topicurl":"setting/getSanvas"} POST to the boafrm/formLogin URI, leading to a CAPTCHA bypass. (Also, the CAPTCHA text is not needed once the attacker has determined valid credentials. The attacker can perform router actions via HTTP requests with Basic Authentication.) This affects A3002RU through 2.0.0, A702R through 2.1.3, N301RT through 2.1.6, N302R through 3.4.0, N300RT through 3.4.0, N200RE through 4.0.0, N150RT through 3.4.0, and N100RE through 3.4.0.

The web server in ABB Telephone Gateway TG/S 3.2 and Busch-Jaeger 6186/11 Telefon-Gateway allows access to different endpoints of the application without authenticating by accessing a specific uniform resource locator (URL) , violating the access-control (ACL) rules. This issue allows obtaining sensitive information that may aid in further attacks and privilege escalation.

The Synergy Systems & Solutions PLC & RTU system has a vulnerability in HUSKY RTU 6049-E70 firmware versions 5.0 and prior. The affected product does not require adequate authentication, which may allow an attacker to read sensitive information or execute arbitrary code. This is a different issue than CVE-2019-16879 and CVE-2019-20045.

CA Automic Sysload 5.6.0 through 6.1.2 contains a vulnerability, related to a lack of authentication on the File Server port, that potentially allows remote attackers to execute arbitrary commands.

MFScripts YetiShare v3.5.2 through v4.5.4 might allow an attacker to reset a password by using a leaked hash (the hash never expires until used).

On Aspire-derived NEC PBXes, including all versions of SV8100 devices, a set of documented, static login credentials may be used to access the DIM interface.

libc in OpenBSD 6.6 allows authentication bypass via the -schallenge username, as demonstrated by smtpd, ldapd, or radiusd. This is related to gen/auth_subr.c and gen/authenticate.c in libc (and login/login.c and xenocara/app/xenodm/greeter/verify.c).

Improper Authentication vulnerability in Easy Digital Downloads plugin allows unauth. Privilege Escalation. This issue affects Easy Digital Downloads: from 3.1 through 3.1.1.4.1.

Sangoma FreePBX 115.0.16.26 and below, 14.0.13.11 and below, 13.0.197.13 and below have Incorrect Access Control.

An authentication bypass vulnerability exists in the OAS Engine functionality of Open Automation Software OAS Platform v18.00.0072. A specially-crafted series of network requests can lead to arbitrary authentication. An attacker can send a sequence of requests to trigger this vulnerability.

Adobe Commerce versions 2.4.7-p2, 2.4.6-p7, 2.4.5-p9, 2.4.4-p10 and earlier are affected by an Improper Authentication vulnerability that could result in privilege escalation. An attacker could exploit this vulnerability to gain unauthorized access or elevated privileges within the application. Exploitation of this issue does not require user interaction.

An unauthenticated user could log into iSTAR Ultra, iSTAR Ultra LT, iSTAR Ultra G2, and iSTAR Edge G2 with administrator rights.

Versions of INEA ME RTU firmware 3.36b and prior do not require authentication to the "root" account on the host system of the device. This could allow an attacker to obtain admin-level access to the host system.

A vulnerability has been identified in Mendix SAML (Mendix 7 compatible) (All versions >= V1.17.3 < V1.18.0), Mendix SAML (Mendix 7 compatible) (All versions >= V1.16.4 < V1.17.3), Mendix SAML (Mendix 8 compatible) (All versions >= V2.3.0 < V2.4.0), Mendix SAML (Mendix 8 compatible) (All versions >= V2.2.0 < V2.3.0), Mendix SAML (Mendix 9 latest compatible, New Track) (All versions >= V3.3.1 < V3.6.1), Mendix SAML (Mendix 9 latest compatible, New Track) (All versions >= V3.1.9 < V3.3.1), Mendix SAML (Mendix 9 latest compatible, Upgrade Track) (All versions >= V3.3.0 < V3.6.0), Mendix SAML (Mendix 9 latest compatible, Upgrade Track) (All versions >= V3.1.8 < V3.3.0), Mendix SAML (Mendix 9.12/9.18 compatible, New Track) (All versions >= V3.3.1 < V3.3.15), Mendix SAML (Mendix 9.12/9.18 compatible, Upgrade Track) (All versions >= V3.3.0 < V3.3.14), Mendix SAML (Mendix 9.6 compatible, New Track) (All versions >= V3.1.9 < V3.2.7), Mendix SAML (Mendix 9.6 compatible, Upgrade Track) (All versions >= V3.1.8 < V3.2.6). The affected versions of the module insufficiently verify the SAML assertions. This could allow unauthenticated remote attackers to bypass authentication and get access to the application. This CVE entry describes the incomplete fix for CVE-2023-25957 in a specific non default configuration.

Symantec Critical System Protection (CSP), versions 8.0, 8.0 HF1 & 8.0 MP1, may be susceptible to an authentication bypass vulnerability, which is a type of issue that can potentially allow a threat actor to circumvent existing authentication controls.

A vulnerability has been identified in SPPA-T3000 Application Server (All versions < Service Pack R8.2 SP2). An attacker with network access to the Application Server could gain remote code execution by sending specifically crafted objects via RMI. Please note that an attacker needs to have network access to the Application Server in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.

A Improper Authentication vulnerability in cryptctl of SUSE Linux Enterprise Server for SAP 12-SP5, SUSE Manager Server 4.0 allows attackers with access to the hashed password to use it without having to crack it. This issue affects: SUSE Linux Enterprise Server for SAP 12-SP5 cryptctl versions prior to 2.4. SUSE Manager Server 4.0 cryptctl versions prior to 2.4.

An Improper Authentication vulnerability in upload-file.php, used by the J-Web component of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to upload arbitrary files to temporary folders on the device. This issue affects Juniper Networks Junos OS: All versions prior to 19.4R3-S11; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S7; 20.3 version 20.3R1 and later versions; 20.4 versions prior to 20.4R3-S6; 21.1 version 21.1R1 and later versions; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R3-S1; 22.2 versions prior to 22.2R2-S1, 22.2R3; 22.3 versions prior to 22.3R1-S2, 22.3R2.