IBM HTTP Server 8.5, and 9.0 is vulnerable to denial of service via the optional module mod_mem_cache.

IBM WebSphere Application Server 9.0, and 8.5 and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.6 are vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources.

In the Linux kernel, the following vulnerability has been resolved: pds_core: fix error handling in pdsc_devcmd_wait Fix two cases where pdsc_devcmd_wait() returns stale success from the completion register instead of an error: 1. FW crash: If firmware stops running, the wait loop breaks early with running=false. The condition "if ((!done || timeout) && running)" is false, so error handling is bypassed and stale status is returned. Check !running first and return -ENXIO. 2. Timeout: If a command times out, err is set to -ETIMEDOUT but then overwritten by pdsc_err_to_errno(status) which reads stale status. Return -ETIMEDOUT immediately after cleaning up. Both errors now propagate to pdsc_devcmd_locked() which queues health_work for recovery.

IBM HTTP Server 8.5, and 9.0 is vulnerable to denial of service via the optional module mod_fastcgi module.

IBM HTTP Server 8.5, and 9.0 is vulnerable to denial of service via the optional module mod_ibm_upload.

In the Linux kernel, the following vulnerability has been resolved: erspan: Initialize options_len before referencing options. The struct ip_tunnel_info has a flexible array member named options that is protected by a counted_by(options_len) attribute. The compiler will use this information to enforce runtime bounds checking deployed by FORTIFY_SOURCE string helpers. As laid out in the GCC documentation, the counter must be initialized before the first reference to the flexible array member. After scanning through the files that use struct ip_tunnel_info and also refer to options or options_len, it appears the normal case is to use the ip_tunnel_info_opts_set() helper. Said helper would initialize options_len properly before copying data into options, however in the GRE ERSPAN code a partial update is done, preventing the use of the helper function. Before this change the handling of ERSPAN traffic in GRE tunnels would cause a kernel panic when the kernel is compiled with GCC 15+ and having FORTIFY_SOURCE configured: memcpy: detected buffer overflow: 4 byte write of buffer size 0 Call Trace: <IRQ> __fortify_panic+0xd/0xf erspan_rcv.cold+0x68/0x83 ? ip_route_input_slow+0x816/0x9d0 gre_rcv+0x1b2/0x1c0 gre_rcv+0x8e/0x100 ? raw_v4_input+0x2a0/0x2b0 ip_protocol_deliver_rcu+0x1ea/0x210 ip_local_deliver_finish+0x86/0x110 ip_local_deliver+0x65/0x110 ? ip_rcv_finish_core+0xd6/0x360 ip_rcv+0x186/0x1a0 Reported-at: https://launchpad.net/bugs/2129580

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix a BUG in rt6_get_pcpu_route() under PREEMPT_RT On PREEMPT_RT kernels, after rt6_get_pcpu_route() returns NULL, the current task can be preempted. Another task running on the same CPU may then execute rt6_make_pcpu_route() and successfully install a pcpu_rt entry. When the first task resumes execution, its cmpxchg() in rt6_make_pcpu_route() will fail because rt6i_pcpu is no longer NULL, triggering the BUG_ON(prev). It's easy to reproduce it by adding mdelay() after rt6_get_pcpu_route(). Using preempt_disable/enable is not appropriate here because ip6_rt_pcpu_alloc() may sleep. Fix this by handling the cmpxchg() failure gracefully on PREEMPT_RT: free our allocation and return the existing pcpu_rt installed by another task. The BUG_ON is replaced by WARN_ON_ONCE for non-PREEMPT_RT kernels where such races should not occur.

In the Linux kernel, the following vulnerability has been resolved: nvmet-fc: move lsop put work to nvmet_fc_ls_req_op It’s possible for more than one async command to be in flight from __nvmet_fc_send_ls_req. For each command, a tgtport reference is taken. In the current code, only one put work item is queued at a time, which results in a leaked reference. To fix this, move the work item to the nvmet_fc_ls_req_op struct, which already tracks all resources related to the command.

In the Linux kernel, the following vulnerability has been resolved: Revert "NFSD: Remove the cap on number of operations per NFSv4 COMPOUND" I've found that pynfs COMP6 now leaves the connection or lease in a strange state, which causes CLOSE9 to hang indefinitely. I've dug into it a little, but I haven't been able to root-cause it yet. However, I bisected to commit 48aab1606fa8 ("NFSD: Remove the cap on number of operations per NFSv4 COMPOUND"). Tianshuo Han also reports a potential vulnerability when decoding an NFSv4 COMPOUND. An attacker can place an arbitrarily large op count in the COMPOUND header, which results in: [ 51.410584] nfsd: vmalloc error: size 1209533382144, exceeds total pages, mode:0xdc0(GFP_KERNEL|__GFP_ZERO), nodemask=(null),cpuset=/,mems_allowed=0 when NFSD attempts to allocate the COMPOUND op array. Let's restore the operation-per-COMPOUND limit, but increased to 200 for now.

In the Linux kernel, the following vulnerability has been resolved: smb/server: fix possible refcount leak in smb2_sess_setup() Reference count of ksmbd_session will leak when session need reconnect. Fix this by adding the missing ksmbd_user_session_put().

In the Linux kernel, the following vulnerability has been resolved: net: enetc: fix the deadlock of enetc_mdio_lock After applying the workaround for err050089, the LS1028A platform experiences RCU stalls on RT kernel. This issue is caused by the recursive acquisition of the read lock enetc_mdio_lock. Here list some of the call stacks identified under the enetc_poll path that may lead to a deadlock: enetc_poll -> enetc_lock_mdio -> enetc_clean_rx_ring OR napi_complete_done -> napi_gro_receive -> enetc_start_xmit -> enetc_lock_mdio -> enetc_map_tx_buffs -> enetc_unlock_mdio -> enetc_unlock_mdio After enetc_poll acquires the read lock, a higher-priority writer attempts to acquire the lock, causing preemption. The writer detects that a read lock is already held and is scheduled out. However, readers under enetc_poll cannot acquire the read lock again because a writer is already waiting, leading to a thread hang. Currently, the deadlock is avoided by adjusting enetc_lock_mdio to prevent recursive lock acquisition.

The TCP stack in the Linux kernel 3.x does not properly implement a SYN cookie protection mechanism for the case of a fast network connection, which allows remote attackers to cause a denial of service (CPU consumption) by sending many TCP SYN packets, as demonstrated by an attack against the kernel-3.10.0 package in CentOS Linux 7. NOTE: third parties have been unable to discern any relationship between the GitHub Engineering finding and the Trigemini.c attack code.

In the Linux kernel, the following vulnerability has been resolved: sctp: avoid NULL dereference when chunk data buffer is missing chunk->skb pointer is dereferenced in the if-block where it's supposed to be NULL only. chunk->skb can only be NULL if chunk->head_skb is not. Check for frag_list instead and do it just before replacing chunk->skb. We're sure that otherwise chunk->skb is non-NULL because of outer if() condition.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix metadata_dst leak __bpf_redirect_neigh_v{4,6} Cilium has a BPF egress gateway feature which forces outgoing K8s Pod traffic to pass through dedicated egress gateways which then SNAT the traffic in order to interact with stable IPs outside the cluster. The traffic is directed to the gateway via vxlan tunnel in collect md mode. A recent BPF change utilized the bpf_redirect_neigh() helper to forward packets after the arrival and decap on vxlan, which turned out over time that the kmalloc-256 slab usage in kernel was ever-increasing. The issue was that vxlan allocates the metadata_dst object and attaches it through a fake dst entry to the skb. The latter was never released though given bpf_redirect_neigh() was merely setting the new dst entry via skb_dst_set() without dropping an existing one first.

In the Linux kernel, the following vulnerability has been resolved: net: gso: Forbid IPv6 TSO with extensions on devices with only IPV6_CSUM When performing Generic Segmentation Offload (GSO) on an IPv6 packet that contains extension headers, the kernel incorrectly requests checksum offload if the egress device only advertises NETIF_F_IPV6_CSUM feature, which has a strict contract: it supports checksum offload only for plain TCP or UDP over IPv6 and explicitly does not support packets with extension headers. The current GSO logic violates this contract by failing to disable the feature for packets with extension headers, such as those used in GREoIPv6 tunnels. This violation results in the device being asked to perform an operation it cannot support, leading to a `skb_warn_bad_offload` warning and a collapse of network throughput. While device TSO/USO is correctly bypassed in favor of software GSO for these packets, the GSO stack must be explicitly told not to request checksum offload. Mask NETIF_F_IPV6_CSUM, NETIF_F_TSO6 and NETIF_F_GSO_UDP_L4 in gso_features_check if the IPv6 header contains extension headers to compute checksum in software. The exception is a BIG TCP extension, which, as stated in commit 68e068cabd2c6c53 ("net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets"): "The feature is only enabled on devices that support BIG TCP TSO. The header is only present for PF_PACKET taps like tcpdump, and not transmitted by physical devices." kernel log output (truncated): WARNING: CPU: 1 PID: 5273 at net/core/dev.c:3535 skb_warn_bad_offload+0x81/0x140 ... Call Trace: <TASK> skb_checksum_help+0x12a/0x1f0 validate_xmit_skb+0x1a3/0x2d0 validate_xmit_skb_list+0x4f/0x80 sch_direct_xmit+0x1a2/0x380 __dev_xmit_skb+0x242/0x670 __dev_queue_xmit+0x3fc/0x7f0 ip6_finish_output2+0x25e/0x5d0 ip6_finish_output+0x1fc/0x3f0 ip6_tnl_xmit+0x608/0xc00 [ip6_tunnel] ip6gre_tunnel_xmit+0x1c0/0x390 [ip6_gre] dev_hard_start_xmit+0x63/0x1c0 __dev_queue_xmit+0x6d0/0x7f0 ip6_finish_output2+0x214/0x5d0 ip6_finish_output+0x1fc/0x3f0 ip6_xmit+0x2ca/0x6f0 ip6_finish_output+0x1fc/0x3f0 ip6_xmit+0x2ca/0x6f0 inet6_csk_xmit+0xeb/0x150 __tcp_transmit_skb+0x555/0xa80 tcp_write_xmit+0x32a/0xe90 tcp_sendmsg_locked+0x437/0x1110 tcp_sendmsg+0x2f/0x50 ... skb linear: 00000000: e4 3d 1a 7d ec 30 e4 3d 1a 7e 5d 90 86 dd 60 0e skb linear: 00000010: 00 0a 1b 34 3c 40 20 11 00 00 00 00 00 00 00 00 skb linear: 00000020: 00 00 00 00 00 12 20 11 00 00 00 00 00 00 00 00 skb linear: 00000030: 00 00 00 00 00 11 2f 00 04 01 04 01 01 00 00 00 skb linear: 00000040: 86 dd 60 0e 00 0a 1b 00 06 40 20 23 00 00 00 00 skb linear: 00000050: 00 00 00 00 00 00 00 00 00 12 20 23 00 00 00 00 skb linear: 00000060: 00 00 00 00 00 00 00 00 00 11 bf 96 14 51 13 f9 skb linear: 00000070: ae 27 a0 a8 2b e3 80 18 00 40 5b 6f 00 00 01 01 skb linear: 00000080: 08 0a 42 d4 50 d5 4b 70 f8 1a

In the Linux kernel, the following vulnerability has been resolved: lib/crypto: arm64/poly1305: Fix register corruption in no-SIMD contexts Restore the SIMD usability check that was removed by commit a59e5468a921 ("crypto: arm64/poly1305 - Add block-only interface"). This safety check is cheap and is well worth eliminating a footgun. While the Poly1305 functions should not be called when SIMD registers are unusable, if they are anyway, they should just do the right thing instead of corrupting random tasks' registers and/or computing incorrect MACs. Fixing this is also needed for poly1305_kunit to pass. Just use may_use_simd() instead of the original crypto_simd_usable(), since poly1305_kunit won't rely on crypto_simd_disabled_for_test.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix refcount leak causing resource not released When ksmbd_conn_releasing(opinfo->conn) returns true,the refcount was not decremented properly, causing a refcount leak that prevents the count from reaching zero and the memory from being released.

In the Linux kernel, the following vulnerability has been resolved: lib/crypto: arm/poly1305: Fix register corruption in no-SIMD contexts Restore the SIMD usability check that was removed by commit 773426f4771b ("crypto: arm/poly1305 - Add block-only interface"). This safety check is cheap and is well worth eliminating a footgun. While the Poly1305 functions should not be called when SIMD registers are unusable, if they are anyway, they should just do the right thing instead of corrupting random tasks' registers and/or computing incorrect MACs. Fixing this is also needed for poly1305_kunit to pass. Just use may_use_simd() instead of the original crypto_simd_usable(), since poly1305_kunit won't rely on crypto_simd_disabled_for_test.

In the Linux kernel, the following vulnerability has been resolved: netfilter: handle unreadable frags sashiko reports: When an skb with unreadable fragments (such as from devmem TCP, where skb_frags_readable(skb) returns false) is processed by the u32 module, skb_copy_bits() will safely return a negative error code [..] xt_u32: bail out with hotdrop in this case. gather_frags: return -1, just as if we had no fragment header. nfnetlink_queue: restrict to the linear part. nfnetlink_log: restrict to the linear part. v2: - skb_zerocopy helpers don't copy readable flag, i.e. nfnetlink_queue is broken too xt_u32 shouldn't return true if hotdrop was set.

In the Linux kernel, the following vulnerability has been resolved: nfsd: allow SC_STATUS_FREEABLE when searching via nfs4_lookup_stateid() The pynfs DELEG8 test fails when run against nfsd. It acquires a delegation and then lets the lease time out. It then tries to use the deleg stateid and expects to see NFS4ERR_DELEG_REVOKED, but it gets bad NFS4ERR_BAD_STATEID instead. When a delegation is revoked, it's initially marked with SC_STATUS_REVOKED, or SC_STATUS_ADMIN_REVOKED and later, it's marked with the SC_STATUS_FREEABLE flag, which denotes that it is waiting for s FREE_STATEID call. nfs4_lookup_stateid() accepts a statusmask that includes the status flags that a found stateid is allowed to have. Currently, that mask never includes SC_STATUS_FREEABLE, which means that revoked delegations are (almost) never found. Add SC_STATUS_FREEABLE to the always-allowed status flags, and remove it from nfsd4_delegreturn() since it's now always implied.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix smbdirect_recv_io leak in smbd_negotiate() error path During tests of another unrelated patch I was able to trigger this error: Objects remaining on __kmem_cache_shutdown()

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix null pointer dereference in compare_guid_key() session_fd_check() walks the per-inode m_op_list during durable-handle session teardown and sets op->conn = NULL for every opinfo whose conn matched the closing session's connection. The matching opinfo, however, stays linked in its per-ClientGuid lease_table_list entry's lb->lease_list because destroy_lease_table() only runs on full TCP-connection teardown, not on SESSION_LOGOFF. If the same TCP connection then negotiates a fresh session with the same ClientGuid (ClientGuid is bound to NEGOTIATE, not the session, and is unchanged across LOGOFF + SETUP) and issues a SMB2 CREATE with a lease context on a different inode, find_same_lease_key() walks lb->lease_list, reaches the stale opinfo, and calls compare_guid_key(), which unconditionally dereferences opinfo->conn->ClientGUID. The conn pointer is NULL and the kernel panics. Reproducer requires only a successful SMB2 SESSION_SETUP and a share configured with 'durable handles = yes'. KASAN report on mainline 70390501d194: general protection fault, probably for non-canonical address 0xdffffc0000000069: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000348-0x000000000000034f] Workqueue: ksmbd-io handle_ksmbd_work RIP: 0010:bcmp+0x5b/0x230 Call Trace: compare_guid_key+0x4b/0xd0 find_same_lease_key+0x324/0x690 smb2_open+0x6aea/0x8e60 handle_ksmbd_work+0x796/0xee0 ... Faulting address 0x348 is the offset of ClientGUID within struct ksmbd_conn, confirming opinfo->conn was NULL. Read opinfo->conn once and bail out if it has been cleared by a concurrent session_fd_check(). A half-detached opinfo cannot be the owner of an active lease, so returning 0 is the correct match result.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: stop TX during firmware restart When iwlwifi firmware crashes (e.g., NMI_INTERRUPT_UNKNOWN on Intel BE201/Wi-Fi 7), iwl_mld_nic_error() sets mld->fw_status.in_hw_restart to true. However, iwl_mld_tx_from_txq() does not check this flag before dequeuing frames from mac80211 and pushing them to the transport layer. Since the firmware is dead, iwl_trans_tx() returns -EIO for each frame, which then gets freed immediately. Under high-throughput conditions (e.g., Tailscale UDP traffic or active SSH sessions), this creates a tight dequeue-send-fail-free loop that wastes CPU cycles and generates rapid skb allocation churn, leading to memory pressure from slab fragmentation. The RX path already has this guard (iwl_mld_rx_mpdu checks in_hw_restart at rx.c:1906), and so does the TXQ allocation worker (iwl_mld_add_txqs_wk at tx.c:156). Add the same guard to iwl_mld_tx_from_txq() to stop all TX during firmware restart. Frames left in mac80211's TXQs are naturally drained after restart completes, when queue reallocation triggers iwl_mld_tx_from_txq() via iwl_mld_add_txq_list(), or when new upper-layer traffic invokes wake_tx_queue. Tested on ASUS Zenbook 14 UX3405CA with Intel BE201 (Wi-Fi 7) on kernel 6.19.5 where the firmware crashes approximately every 10-15 minutes under Tailscale traffic.

In the Linux kernel, the following vulnerability has been resolved: crypto/krb5, rxrpc: Fix lack of pre-decrypt/pre-verify length checks Change the krb5 crypto library to provide facilities to precheck the length of the message about to be decrypted or verified. Fix AF_RXRPC to make use of this to validate DATA packets secured with RxGK.

In the Linux kernel, the following vulnerability has been resolved: xen-netfront: handle NULL returned by xdp_convert_buff_to_frame() The function xdp_convert_buff_to_frame() may return NULL if it fails to correctly convert the XDP buffer into an XDP frame due to memory constraints, internal errors, or invalid data. Failing to check for NULL may lead to a NULL pointer dereference if the result is used later in processing, potentially causing crashes, data corruption, or undefined behavior. On XDP redirect failure, the associated page must be released explicitly if it was previously retained via get_page(). Failing to do so may result in a memory leak, as the pages reference count is not decremented.

In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: don't restore null sk_state_change queue->state_change is set as part of nvmet_tcp_set_queue_sock(), but if the TCP connection isn't established when nvmet_tcp_set_queue_sock() is called then queue->state_change isn't set and sock->sk->sk_state_change isn't replaced. As such we don't need to restore sock->sk->sk_state_change if queue->state_change is NULL. This avoids NULL pointer dereferences such as this: [ 286.462026][ C0] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 286.462814][ C0] #PF: supervisor instruction fetch in kernel mode [ 286.463796][ C0] #PF: error_code(0x0010) - not-present page [ 286.464392][ C0] PGD 8000000140620067 P4D 8000000140620067 PUD 114201067 PMD 0 [ 286.465086][ C0] Oops: Oops: 0010 [#1] SMP KASAN PTI [ 286.465559][ C0] CPU: 0 UID: 0 PID: 1628 Comm: nvme Not tainted 6.15.0-rc2+ #11 PREEMPT(voluntary) [ 286.466393][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 [ 286.467147][ C0] RIP: 0010:0x0 [ 286.467420][ C0] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 286.467977][ C0] RSP: 0018:ffff8883ae008580 EFLAGS: 00010246 [ 286.468425][ C0] RAX: 0000000000000000 RBX: ffff88813fd34100 RCX: ffffffffa386cc43 [ 286.469019][ C0] RDX: 1ffff11027fa68b6 RSI: 0000000000000008 RDI: ffff88813fd34100 [ 286.469545][ C0] RBP: ffff88813fd34160 R08: 0000000000000000 R09: ffffed1027fa682c [ 286.470072][ C0] R10: ffff88813fd34167 R11: 0000000000000000 R12: ffff88813fd344c3 [ 286.470585][ C0] R13: ffff88813fd34112 R14: ffff88813fd34aec R15: ffff888132cdd268 [ 286.471070][ C0] FS: 00007fe3c04c7d80(0000) GS:ffff88840743f000(0000) knlGS:0000000000000000 [ 286.471644][ C0] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 286.472543][ C0] CR2: ffffffffffffffd6 CR3: 000000012daca000 CR4: 00000000000006f0 [ 286.473500][ C0] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 286.474467][ C0] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400 [ 286.475453][ C0] Call Trace: [ 286.476102][ C0] <IRQ> [ 286.476719][ C0] tcp_fin+0x2bb/0x440 [ 286.477429][ C0] tcp_data_queue+0x190f/0x4e60 [ 286.478174][ C0] ? __build_skb_around+0x234/0x330 [ 286.478940][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.479659][ C0] ? __pfx_tcp_data_queue+0x10/0x10 [ 286.480431][ C0] ? tcp_try_undo_loss+0x640/0x6c0 [ 286.481196][ C0] ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90 [ 286.482046][ C0] ? kvm_clock_get_cycles+0x14/0x30 [ 286.482769][ C0] ? ktime_get+0x66/0x150 [ 286.483433][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.484146][ C0] tcp_rcv_established+0x6e4/0x2050 [ 286.484857][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.485523][ C0] ? ipv4_dst_check+0x160/0x2b0 [ 286.486203][ C0] ? __pfx_tcp_rcv_established+0x10/0x10 [ 286.486917][ C0] ? lock_release+0x217/0x2c0 [ 286.487595][ C0] tcp_v4_do_rcv+0x4d6/0x9b0 [ 286.488279][ C0] tcp_v4_rcv+0x2af8/0x3e30 [ 286.488904][ C0] ? raw_local_deliver+0x51b/0xad0 [ 286.489551][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.490198][ C0] ? __pfx_tcp_v4_rcv+0x10/0x10 [ 286.490813][ C0] ? __pfx_raw_local_deliver+0x10/0x10 [ 286.491487][ C0] ? __pfx_nf_confirm+0x10/0x10 [nf_conntrack] [ 286.492275][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.492900][ C0] ip_protocol_deliver_rcu+0x8f/0x370 [ 286.493579][ C0] ip_local_deliver_finish+0x297/0x420 [ 286.494268][ C0] ip_local_deliver+0x168/0x430 [ 286.494867][ C0] ? __pfx_ip_local_deliver+0x10/0x10 [ 286.495498][ C0] ? __pfx_ip_local_deliver_finish+0x10/0x10 [ 286.496204][ C0] ? ip_rcv_finish_core+0x19a/0x1f20 [ 286.496806][ C0] ? lock_release+0x217/0x2c0 [ 286.497414][ C0] ip_rcv+0x455/0x6e0 [ 286.497945][ C0] ? __pfx_ip_rcv+0x10/0x10 [ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk-star-emac: fix spinlock recursion issues on rx/tx poll Use spin_lock_irqsave and spin_unlock_irqrestore instead of spin_lock and spin_unlock in mtk_star_emac driver to avoid spinlock recursion occurrence that can happen when enabling the DMA interrupts again in rx/tx poll. ``` BUG: spinlock recursion on CPU#0, swapper/0/0 lock: 0xffff00000db9cf20, .magic: dead4ead, .owner: swapper/0/0, .owner_cpu: 0 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.15.0-rc2-next-20250417-00001-gf6a27738686c-dirty #28 PREEMPT Hardware name: MediaTek MT8365 Open Platform EVK (DT) Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0x60/0x80 dump_stack+0x18/0x24 spin_dump+0x78/0x88 do_raw_spin_lock+0x11c/0x120 _raw_spin_lock+0x20/0x2c mtk_star_handle_irq+0xc0/0x22c [mtk_star_emac] __handle_irq_event_percpu+0x48/0x140 handle_irq_event+0x4c/0xb0 handle_fasteoi_irq+0xa0/0x1bc handle_irq_desc+0x34/0x58 generic_handle_domain_irq+0x1c/0x28 gic_handle_irq+0x4c/0x120 do_interrupt_handler+0x50/0x84 el1_interrupt+0x34/0x68 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x6c/0x70 regmap_mmio_read32le+0xc/0x20 (P) _regmap_bus_reg_read+0x6c/0xac _regmap_read+0x60/0xdc regmap_read+0x4c/0x80 mtk_star_rx_poll+0x2f4/0x39c [mtk_star_emac] __napi_poll+0x38/0x188 net_rx_action+0x164/0x2c0 handle_softirqs+0x100/0x244 __do_softirq+0x14/0x20 ____do_softirq+0x10/0x20 call_on_irq_stack+0x24/0x64 do_softirq_own_stack+0x1c/0x40 __irq_exit_rcu+0xd4/0x10c irq_exit_rcu+0x10/0x1c el1_interrupt+0x38/0x68 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x6c/0x70 cpuidle_enter_state+0xac/0x320 (P) cpuidle_enter+0x38/0x50 do_idle+0x1e4/0x260 cpu_startup_entry+0x34/0x3c rest_init+0xdc/0xe0 console_on_rootfs+0x0/0x6c __primary_switched+0x88/0x90 ```

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix oops due to non-existence of prealloc backlog struct If an AF_RXRPC service socket is opened and bound, but calls are preallocated, then rxrpc_alloc_incoming_call() will oops because the rxrpc_backlog struct doesn't get allocated until the first preallocation is made. Fix this by returning NULL from rxrpc_alloc_incoming_call() if there is no backlog struct. This will cause the incoming call to be aborted.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix recv-recv race of completed call If a call receives an event (such as incoming data), the call gets placed on the socket's queue and a thread in recvmsg can be awakened to go and process it. Once the thread has picked up the call off of the queue, further events will cause it to be requeued, and once the socket lock is dropped (recvmsg uses call->user_mutex to allow the socket to be used in parallel), a second thread can come in and its recvmsg can pop the call off the socket queue again. In such a case, the first thread will be receiving stuff from the call and the second thread will be blocked on call->user_mutex. The first thread can, at this point, process both the event that it picked call for and the event that the second thread picked the call for and may see the call terminate - in which case the call will be "released", decoupling the call from the user call ID assigned to it (RXRPC_USER_CALL_ID in the control message). The first thread will return okay, but then the second thread will wake up holding the user_mutex and, if it sees that the call has been released by the first thread, it will BUG thusly: kernel BUG at net/rxrpc/recvmsg.c:474! Fix this by just dequeuing the call and ignoring it if it is seen to be already released. We can't tell userspace about it anyway as the user call ID has become stale.

In the Linux kernel, the following vulnerability has been resolved: ice: add NULL check in eswitch lag check The function ice_lag_is_switchdev_running() is being called from outside of the LAG event handler code. This results in the lag->upper_netdev being NULL sometimes. To avoid a NULL-pointer dereference, there needs to be a check before it is dereferenced.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Remove skb secpath if xfrm state is not found Hardware returns a unique identifier for a decrypted packet's xfrm state, this state is looked up in an xarray. However, the state might have been freed by the time of this lookup. Currently, if the state is not found, only a counter is incremented. The secpath (sp) extension on the skb is not removed, resulting in sp->len becoming 0. Subsequently, functions like __xfrm_policy_check() attempt to access fields such as xfrm_input_state(skb)->xso.type (which dereferences sp->xvec[sp->len - 1]) without first validating sp->len. This leads to a crash when dereferencing an invalid state pointer. This patch prevents the crash by explicitly removing the secpath extension from the skb if the xfrm state is not found after hardware decryption. This ensures downstream functions do not operate on a zero-length secpath. BUG: unable to handle page fault for address: ffffffff000002c8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 282e067 P4D 282e067 PUD 0 Oops: Oops: 0000 [#1] SMP CPU: 12 UID: 0 PID: 0 Comm: swapper/12 Not tainted 6.15.0-rc7_for_upstream_min_debug_2025_05_27_22_44 #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:__xfrm_policy_check+0x61a/0xa30 Code: b6 77 7f 83 e6 02 74 14 4d 8b af d8 00 00 00 41 0f b6 45 05 c1 e0 03 48 98 49 01 c5 41 8b 45 00 83 e8 01 48 98 49 8b 44 c5 10 <0f> b6 80 c8 02 00 00 83 e0 0c 3c 04 0f 84 0c 02 00 00 31 ff 80 fa RSP: 0018:ffff88885fb04918 EFLAGS: 00010297 RAX: ffffffff00000000 RBX: 0000000000000002 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000002 RDI: 0000000000000000 RBP: ffffffff8311af80 R08: 0000000000000020 R09: 00000000c2eda353 R10: ffff88812be2bbc8 R11: 000000001faab533 R12: ffff88885fb049c8 R13: ffff88812be2bbc8 R14: 0000000000000000 R15: ffff88811896ae00 FS: 0000000000000000(0000) GS:ffff8888dca82000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff000002c8 CR3: 0000000243050002 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ? try_to_wake_up+0x108/0x4c0 ? udp4_lib_lookup2+0xbe/0x150 ? udp_lib_lport_inuse+0x100/0x100 ? __udp4_lib_lookup+0x2b0/0x410 __xfrm_policy_check2.constprop.0+0x11e/0x130 udp_queue_rcv_one_skb+0x1d/0x530 udp_unicast_rcv_skb+0x76/0x90 __udp4_lib_rcv+0xa64/0xe90 ip_protocol_deliver_rcu+0x20/0x130 ip_local_deliver_finish+0x75/0xa0 ip_local_deliver+0xc1/0xd0 ? ip_protocol_deliver_rcu+0x130/0x130 ip_sublist_rcv+0x1f9/0x240 ? ip_rcv_finish_core+0x430/0x430 ip_list_rcv+0xfc/0x130 __netif_receive_skb_list_core+0x181/0x1e0 netif_receive_skb_list_internal+0x200/0x360 ? mlx5e_build_rx_skb+0x1bc/0xda0 [mlx5_core] gro_receive_skb+0xfd/0x210 mlx5e_handle_rx_cqe_mpwrq+0x141/0x280 [mlx5_core] mlx5e_poll_rx_cq+0xcc/0x8e0 [mlx5_core] ? mlx5e_handle_rx_dim+0x91/0xd0 [mlx5_core] mlx5e_napi_poll+0x114/0xab0 [mlx5_core] __napi_poll+0x25/0x170 net_rx_action+0x32d/0x3a0 ? mlx5_eq_comp_int+0x8d/0x280 [mlx5_core] ? notifier_call_chain+0x33/0xa0 handle_softirqs+0xda/0x250 irq_exit_rcu+0x6d/0xc0 common_interrupt+0x81/0xa0 </IRQ>

In the Linux kernel, the following vulnerability has been resolved: net/tls: fix kernel panic when alloc_page failed We cannot set frag_list to NULL pointer when alloc_page failed. It will be used in tls_strp_check_queue_ok when the next time tls_strp_read_sock is called. This is because we don't reset full_len in tls_strp_flush_anchor_copy() so the recv path will try to continue handling the partial record on the next call but we dettached the rcvq from the frag list. Alternative fix would be to reset full_len. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028 Call trace: tls_strp_check_rcv+0x128/0x27c tls_strp_data_ready+0x34/0x44 tls_data_ready+0x3c/0x1f0 tcp_data_ready+0x9c/0xe4 tcp_data_queue+0xf6c/0x12d0 tcp_rcv_established+0x52c/0x798

In the Linux kernel, the following vulnerability has been resolved: net: fix udp gso skb_segment after pull from frag_list Commit a1e40ac5b5e9 ("net: gso: fix udp gso fraglist segmentation after pull from frag_list") detected invalid geometry in frag_list skbs and redirects them from skb_segment_list to more robust skb_segment. But some packets with modified geometry can also hit bugs in that code. We don't know how many such cases exist. Addressing each one by one also requires touching the complex skb_segment code, which risks introducing bugs for other types of skbs. Instead, linearize all these packets that fail the basic invariants on gso fraglist skbs. That is more robust. If only part of the fraglist payload is pulled into head_skb, it will always cause exception when splitting skbs by skb_segment. For detailed call stack information, see below. Valid SKB_GSO_FRAGLIST skbs - consist of two or more segments - the head_skb holds the protocol headers plus first gso_size - one or more frag_list skbs hold exactly one segment - all but the last must be gso_size Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can modify fraglist skbs, breaking these invariants. In extreme cases they pull one part of data into skb linear. For UDP, this causes three payloads with lengths of (11,11,10) bytes were pulled tail to become (12,10,10) bytes. The skbs no longer meets the above SKB_GSO_FRAGLIST conditions because payload was pulled into head_skb, it needs to be linearized before pass to regular skb_segment. skb_segment+0xcd0/0xd14 __udp_gso_segment+0x334/0x5f4 udp4_ufo_fragment+0x118/0x15c inet_gso_segment+0x164/0x338 skb_mac_gso_segment+0xc4/0x13c __skb_gso_segment+0xc4/0x124 validate_xmit_skb+0x9c/0x2c0 validate_xmit_skb_list+0x4c/0x80 sch_direct_xmit+0x70/0x404 __dev_queue_xmit+0x64c/0xe5c neigh_resolve_output+0x178/0x1c4 ip_finish_output2+0x37c/0x47c __ip_finish_output+0x194/0x240 ip_finish_output+0x20/0xf4 ip_output+0x100/0x1a0 NF_HOOK+0xc4/0x16c ip_forward+0x314/0x32c ip_rcv+0x90/0x118 __netif_receive_skb+0x74/0x124 process_backlog+0xe8/0x1a4 __napi_poll+0x5c/0x1f8 net_rx_action+0x154/0x314 handle_softirqs+0x154/0x4b8 [118.376811] [C201134] rxq0_pus: [name:bug&]kernel BUG at net/core/skbuff.c:4278! [118.376829] [C201134] rxq0_pus: [name:traps&]Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP [118.470774] [C201134] rxq0_pus: [name:mrdump&]Kernel Offset: 0x178cc00000 from 0xffffffc008000000 [118.470810] [C201134] rxq0_pus: [name:mrdump&]PHYS_OFFSET: 0x40000000 [118.470827] [C201134] rxq0_pus: [name:mrdump&]pstate: 60400005 (nZCv daif +PAN -UAO) [118.470848] [C201134] rxq0_pus: [name:mrdump&]pc : [0xffffffd79598aefc] skb_segment+0xcd0/0xd14 [118.470900] [C201134] rxq0_pus: [name:mrdump&]lr : [0xffffffd79598a5e8] skb_segment+0x3bc/0xd14 [118.470928] [C201134] rxq0_pus: [name:mrdump&]sp : ffffffc008013770

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix panic when calling skb_linearize The panic can be reproduced by executing the command: ./bench sockmap -c 2 -p 1 -a --rx-verdict-ingress --rx-strp 100000 Then a kernel panic was captured: ''' [ 657.460555] kernel BUG at net/core/skbuff.c:2178! [ 657.462680] Tainted: [W]=WARN [ 657.463287] Workqueue: events sk_psock_backlog ... [ 657.469610] <TASK> [ 657.469738] ? die+0x36/0x90 [ 657.469916] ? do_trap+0x1d0/0x270 [ 657.470118] ? pskb_expand_head+0x612/0xf40 [ 657.470376] ? pskb_expand_head+0x612/0xf40 [ 657.470620] ? do_error_trap+0xa3/0x170 [ 657.470846] ? pskb_expand_head+0x612/0xf40 [ 657.471092] ? handle_invalid_op+0x2c/0x40 [ 657.471335] ? pskb_expand_head+0x612/0xf40 [ 657.471579] ? exc_invalid_op+0x2d/0x40 [ 657.471805] ? asm_exc_invalid_op+0x1a/0x20 [ 657.472052] ? pskb_expand_head+0xd1/0xf40 [ 657.472292] ? pskb_expand_head+0x612/0xf40 [ 657.472540] ? lock_acquire+0x18f/0x4e0 [ 657.472766] ? find_held_lock+0x2d/0x110 [ 657.472999] ? __pfx_pskb_expand_head+0x10/0x10 [ 657.473263] ? __kmalloc_cache_noprof+0x5b/0x470 [ 657.473537] ? __pfx___lock_release.isra.0+0x10/0x10 [ 657.473826] __pskb_pull_tail+0xfd/0x1d20 [ 657.474062] ? __kasan_slab_alloc+0x4e/0x90 [ 657.474707] sk_psock_skb_ingress_enqueue+0x3bf/0x510 [ 657.475392] ? __kasan_kmalloc+0xaa/0xb0 [ 657.476010] sk_psock_backlog+0x5cf/0xd70 [ 657.476637] process_one_work+0x858/0x1a20 ''' The panic originates from the assertion BUG_ON(skb_shared(skb)) in skb_linearize(). A previous commit(see Fixes tag) introduced skb_get() to avoid race conditions between skb operations in the backlog and skb release in the recvmsg path. However, this caused the panic to always occur when skb_linearize is executed. The "--rx-strp 100000" parameter forces the RX path to use the strparser module which aggregates data until it reaches 100KB before calling sockmap logic. The 100KB payload exceeds MAX_MSG_FRAGS, triggering skb_linearize. To fix this issue, just move skb_get into sk_psock_skb_ingress_enqueue. ''' sk_psock_backlog: sk_psock_handle_skb skb_get(skb) <== we move it into 'sk_psock_skb_ingress_enqueue' sk_psock_skb_ingress____________ ↓ | | → sk_psock_skb_ingress_self | sk_psock_skb_ingress_enqueue sk_psock_verdict_apply_________________↑ skb_linearize ''' Note that for verdict_apply path, the skb_get operation is unnecessary so we add 'take_ref' param to control it's behavior.

In the Linux kernel, the following vulnerability has been resolved: NFSv4/pNFS: Fix a race to wake on NFS_LAYOUT_DRAIN We found a few different systems hung up in writeback waiting on the same page lock, and one task waiting on the NFS_LAYOUT_DRAIN bit in pnfs_update_layout(), however the pnfs_layout_hdr's plh_outstanding count was zero. It seems most likely that this is another race between the waiter and waker similar to commit ed0172af5d6f ("SUNRPC: Fix a race to wake a sync task"). Fix it up by applying the advised barrier.

In the Linux kernel, the following vulnerability has been resolved: nvmet: fix memory leak of bio integrity If nvmet receives commands with metadata there is a continuous memory leak of kmalloc-128 slab or more precisely bio->bi_integrity. Since commit bf4c89fc8797 ("block: don't call bio_uninit from bio_endio") each user of bio_init has to use bio_uninit as well. Otherwise the bio integrity is not getting free. Nvmet uses bio_init for inline bios. Uninit the inline bio to complete deallocation of integrity in bio.

In the Linux kernel, the following vulnerability has been resolved: sunrpc: fix handling of server side tls alerts Scott Mayhew discovered a security exploit in NFS over TLS in tls_alert_recv() due to its assumption it can read data from the msg iterator's kvec.. kTLS implementation splits TLS non-data record payload between the control message buffer (which includes the type such as TLS aler or TLS cipher change) and the rest of the payload (say TLS alert's level/description) which goes into the msg payload buffer. This patch proposes to rework how control messages are setup and used by sock_recvmsg(). If no control message structure is setup, kTLS layer will read and process TLS data record types. As soon as it encounters a TLS control message, it would return an error. At that point, NFS can setup a kvec backed msg buffer and read in the control message such as a TLS alert. Msg iterator can advance the kvec pointer as a part of the copy process thus we need to revert the iterator before calling into the tls_alert_recv.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix WARNING "do not call blocking ops when !TASK_RUNNING" wait_event_timeout() will set the state of the current task to TASK_UNINTERRUPTIBLE, before doing the condition check. This means that ksmbd_durable_scavenger_alive() will try to acquire the mutex while already in a sleeping state. The scheduler warns us by giving the following warning: do not call blocking ops when !TASK_RUNNING; state=2 set at [<0000000061515a6f>] prepare_to_wait_event+0x9f/0x6c0 WARNING: CPU: 2 PID: 4147 at kernel/sched/core.c:10099 __might_sleep+0x12f/0x160 mutex lock is not needed in ksmbd_durable_scavenger_alive().

In the Linux kernel, the following vulnerability has been resolved: ksmbd: limit repeated connections from clients with the same IP Repeated connections from clients with the same IP address may exhaust the max connections and prevent other normal client connections. This patch limit repeated connections from clients with the same IP.

In the Linux kernel, the following vulnerability has been resolved: crypto: pcrypt - restore callback for non-parallel fallback pcrypt installs pcrypt_aead_done() on the child AEAD request before trying to submit it through padata. If padata_do_parallel() returns -EBUSY, pcrypt falls back to calling the child AEAD directly. That fallback must not keep the padata completion callback. Otherwise an asynchronous completion runs pcrypt_aead_done() even though the request was never enrolled in padata. Restore the original request callback and callback data before calling the child AEAD directly. This keeps the fallback path aligned with a direct AEAD request while leaving the parallel path unchanged.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix null pointer dereference in destroy_previous_session If client set ->PreviousSessionId on kerberos session setup stage, NULL pointer dereference error will happen. Since sess->user is not set yet, It can pass the user argument as NULL to destroy_previous_session. sess->user will be set in ksmbd_krb5_authenticate(). So this patch move calling destroy_previous_session() after ksmbd_krb5_authenticate().

In the Linux kernel, the following vulnerability has been resolved: net, bpf: check master for NULL in xdp_master_redirect() xdp_master_redirect() dereferences the result of netdev_master_upper_dev_get_rcu() without a NULL check, but that helper returns NULL when the receiving device has no upper-master adjacency. The reach guard only checks netif_is_bond_slave(). On bond slave release bond_upper_dev_unlink() drops the upper-master adjacency before clearing IFF_SLAVE, so an XDP_TX reaching xdp_master_redirect() in that window still passes netif_is_bond_slave() while master is already NULL, and faults on master->flags at offset 0xb0: BUG: kernel NULL pointer dereference, address: 00000000000000b0 RIP: 0010:xdp_master_redirect (net/core/filter.c:4432) Call Trace: xdp_master_redirect (net/core/filter.c:4432) bpf_prog_run_generic_xdp (include/net/xdp.h:700) do_xdp_generic (net/core/dev.c:5608) __netif_receive_skb_one_core (net/core/dev.c:6204) process_backlog (net/core/dev.c:6319) __napi_poll (net/core/dev.c:7729) net_rx_action (net/core/dev.c:7792) handle_softirqs (kernel/softirq.c:622) __dev_queue_xmit (include/linux/bottom_half.h:33) packet_sendmsg (net/packet/af_packet.c:3082) __sys_sendto (net/socket.c:2252) Kernel panic - not syncing: Fatal exception in interrupt The missing check dates back to the original code; commit 1921f91298d1 ("net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master") later added the master->flags read where the fault now lands but kept the unconditional deref. Check master for NULL before use; a NULL master is treated the same as one that is not up.

In the Linux kernel, the following vulnerability has been resolved: calipso: Fix null-ptr-deref in calipso_req_{set,del}attr(). syzkaller reported a null-ptr-deref in sock_omalloc() while allocating a CALIPSO option. [0] The NULL is of struct sock, which was fetched by sk_to_full_sk() in calipso_req_setattr(). Since commit a1a5344ddbe8 ("tcp: avoid two atomic ops for syncookies"), reqsk->rsk_listener could be NULL when SYN Cookie is returned to its client, as hinted by the leading SYN Cookie log. Here are 3 options to fix the bug: 1) Return 0 in calipso_req_setattr() 2) Return an error in calipso_req_setattr() 3) Alaways set rsk_listener 1) is no go as it bypasses LSM, but 2) effectively disables SYN Cookie for CALIPSO. 3) is also no go as there have been many efforts to reduce atomic ops and make TCP robust against DDoS. See also commit 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood"). As of the blamed commit, SYN Cookie already did not need refcounting, and no one has stumbled on the bug for 9 years, so no CALIPSO user will care about SYN Cookie. Let's return an error in calipso_req_setattr() and calipso_req_delattr() in the SYN Cookie case. This can be reproduced by [1] on Fedora and now connect() of nc times out. [0]: TCP: request_sock_TCPv6: Possible SYN flooding on port [::]:20002. Sending cookies. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 3 UID: 0 PID: 12262 Comm: syz.1.2611 Not tainted 6.14.0 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_pnet include/net/net_namespace.h:406 [inline] RIP: 0010:sock_net include/net/sock.h:655 [inline] RIP: 0010:sock_kmalloc+0x35/0x170 net/core/sock.c:2806 Code: 89 d5 41 54 55 89 f5 53 48 89 fb e8 25 e3 c6 fd e8 f0 91 e3 00 48 8d 7b 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 26 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b RSP: 0018:ffff88811af89038 EFLAGS: 00010216 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffff888105266400 RDX: 0000000000000006 RSI: ffff88800c890000 RDI: 0000000000000030 RBP: 0000000000000050 R08: 0000000000000000 R09: ffff88810526640e R10: ffffed1020a4cc81 R11: ffff88810526640f R12: 0000000000000000 R13: 0000000000000820 R14: ffff888105266400 R15: 0000000000000050 FS: 00007f0653a07640(0000) GS:ffff88811af80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f863ba096f4 CR3: 00000000163c0005 CR4: 0000000000770ef0 PKRU: 80000000 Call Trace: <IRQ> ipv6_renew_options+0x279/0x950 net/ipv6/exthdrs.c:1288 calipso_req_setattr+0x181/0x340 net/ipv6/calipso.c:1204 calipso_req_setattr+0x56/0x80 net/netlabel/netlabel_calipso.c:597 netlbl_req_setattr+0x18a/0x440 net/netlabel/netlabel_kapi.c:1249 selinux_netlbl_inet_conn_request+0x1fb/0x320 security/selinux/netlabel.c:342 selinux_inet_conn_request+0x1eb/0x2c0 security/selinux/hooks.c:5551 security_inet_conn_request+0x50/0xa0 security/security.c:4945 tcp_v6_route_req+0x22c/0x550 net/ipv6/tcp_ipv6.c:825 tcp_conn_request+0xec8/0x2b70 net/ipv4/tcp_input.c:7275 tcp_v6_conn_request+0x1e3/0x440 net/ipv6/tcp_ipv6.c:1328 tcp_rcv_state_process+0xafa/0x52b0 net/ipv4/tcp_input.c:6781 tcp_v6_do_rcv+0x8a6/0x1a40 net/ipv6/tcp_ipv6.c:1667 tcp_v6_rcv+0x505e/0x5b50 net/ipv6/tcp_ipv6.c:1904 ip6_protocol_deliver_rcu+0x17c/0x1da0 net/ipv6/ip6_input.c:436 ip6_input_finish+0x103/0x180 net/ipv6/ip6_input.c:480 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ip6_input+0x13c/0x6b0 net/ipv6/ip6_input.c:491 dst_input include/net/dst.h:469 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] ip6_rcv_finish+0xb6/0x490 net/ipv6/ip6_input.c:69 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netf ---truncated---

In the Linux kernel, the following vulnerability has been resolved: nfsd: decrease sc_count directly if fail to queue dl_recall A deadlock warning occurred when invoking nfs4_put_stid following a failed dl_recall queue operation: T1 T2 nfs4_laundromat nfs4_get_client_reaplist nfs4_anylock_blockers __break_lease spin_lock // ctx->flc_lock spin_lock // clp->cl_lock nfs4_lockowner_has_blockers locks_owner_has_blockers spin_lock // flctx->flc_lock nfsd_break_deleg_cb nfsd_break_one_deleg nfs4_put_stid refcount_dec_and_lock spin_lock // clp->cl_lock When a file is opened, an nfs4_delegation is allocated with sc_count initialized to 1, and the file_lease holds a reference to the delegation. The file_lease is then associated with the file through kernel_setlease. The disassociation is performed in nfsd4_delegreturn via the following call chain: nfsd4_delegreturn --> destroy_delegation --> destroy_unhashed_deleg --> nfs4_unlock_deleg_lease --> kernel_setlease --> generic_delete_lease The corresponding sc_count reference will be released after this disassociation. Since nfsd_break_one_deleg executes while holding the flc_lock, the disassociation process becomes blocked when attempting to acquire flc_lock in generic_delete_lease. This means: 1) sc_count in nfsd_break_one_deleg will not be decremented to 0; 2) The nfs4_put_stid called by nfsd_break_one_deleg will not attempt to acquire cl_lock; 3) Consequently, no deadlock condition is created. Given that sc_count in nfsd_break_one_deleg remains non-zero, we can safely perform refcount_dec on sc_count directly. This approach effectively avoids triggering deadlock warnings.

In the Linux kernel, the following vulnerability has been resolved: scsi: target: Fix NULL pointer dereference in core_scsi3_decode_spec_i_port() The function core_scsi3_decode_spec_i_port(), in its error code path, unconditionally calls core_scsi3_lunacl_undepend_item() passing the dest_se_deve pointer, which may be NULL. This can lead to a NULL pointer dereference if dest_se_deve remains unset. SPC-3 PR SPEC_I_PT: Unable to locate dest_tpg Unable to handle kernel paging request at virtual address dfff800000000012 Call trace: core_scsi3_lunacl_undepend_item+0x2c/0xf0 [target_core_mod] (P) core_scsi3_decode_spec_i_port+0x120c/0x1c30 [target_core_mod] core_scsi3_emulate_pro_register+0x6b8/0xcd8 [target_core_mod] target_scsi3_emulate_pr_out+0x56c/0x840 [target_core_mod] Fix this by adding a NULL check before calling core_scsi3_lunacl_undepend_item()

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: am65-cpsw-nuss: Fix skb size by accounting for skb_shared_info While transitioning from netdev_alloc_ip_align() to build_skb(), memory for the "skb_shared_info" member of an "skb" was not allocated. Fix this by allocating "PAGE_SIZE" as the skb length, accounting for the packet length, headroom and tailroom, thereby including the required memory space for skb_shared_info.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix warning when reconnecting channel When reconnecting a channel in smb2_reconnect_server(), a dummy tcon is passed down to smb2_reconnect() with ->query_interface uninitialized, so we can't call queue_delayed_work() on it. Fix the following warning by ensuring that we're queueing the delayed worker from correct tcon. WARNING: CPU: 4 PID: 1126 at kernel/workqueue.c:2498 __queue_delayed_work+0x1d2/0x200 Modules linked in: cifs cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs] CPU: 4 UID: 0 PID: 1126 Comm: kworker/4:0 Not tainted 6.16.0-rc3 #5 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-4.fc42 04/01/2014 Workqueue: cifsiod smb2_reconnect_server [cifs] RIP: 0010:__queue_delayed_work+0x1d2/0x200 Code: 41 5e 41 5f e9 7f ee ff ff 90 0f 0b 90 e9 5d ff ff ff bf 02 00 00 00 e8 6c f3 07 00 89 c3 eb bd 90 0f 0b 90 e9 57 f> 0b 90 e9 65 fe ff ff 90 0f 0b 90 e9 72 fe ff ff 90 0f 0b 90 e9 RSP: 0018:ffffc900014afad8 EFLAGS: 00010003 RAX: 0000000000000000 RBX: ffff888124d99988 RCX: ffffffff81399cc1 RDX: dffffc0000000000 RSI: ffff888114326e00 RDI: ffff888124d999f0 RBP: 000000000000ea60 R08: 0000000000000001 R09: ffffed10249b3331 R10: ffff888124d9998f R11: 0000000000000004 R12: 0000000000000040 R13: ffff888114326e00 R14: ffff888124d999d8 R15: ffff888114939020 FS: 0000000000000000(0000) GS:ffff88829f7fe000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffe7a2b4038 CR3: 0000000120a6f000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> queue_delayed_work_on+0xb4/0xc0 smb2_reconnect+0xb22/0xf50 [cifs] smb2_reconnect_server+0x413/0xd40 [cifs] ? __pfx_smb2_reconnect_server+0x10/0x10 [cifs] ? local_clock_noinstr+0xd/0xd0 ? local_clock+0x15/0x30 ? lock_release+0x29b/0x390 process_one_work+0x4c5/0xa10 ? __pfx_process_one_work+0x10/0x10 ? __list_add_valid_or_report+0x37/0x120 worker_thread+0x2f1/0x5a0 ? __kthread_parkme+0xde/0x100 ? __pfx_worker_thread+0x10/0x10 kthread+0x1fe/0x380 ? kthread+0x10f/0x380 ? __pfx_kthread+0x10/0x10 ? local_clock_noinstr+0xd/0xd0 ? ret_from_fork+0x1b/0x1f0 ? local_clock+0x15/0x30 ? lock_release+0x29b/0x390 ? rcu_is_watching+0x20/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x15b/0x1f0 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> irq event stamp: 1116206 hardirqs last enabled at (1116205): [<ffffffff8143af42>] __up_console_sem+0x52/0x60 hardirqs last disabled at (1116206): [<ffffffff81399f0e>] queue_delayed_work_on+0x6e/0xc0 softirqs last enabled at (1116138): [<ffffffffc04562fd>] __smb_send_rqst+0x42d/0x950 [cifs] softirqs last disabled at (1116136): [<ffffffff823d35e1>] release_sock+0x21/0xf0

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix the smbd_response slab to allow usercopy The handling of received data in the smbdirect client code involves using copy_to_iter() to copy data from the smbd_reponse struct's packet trailer to a folioq buffer provided by netfslib that encapsulates a chunk of pagecache. If, however, CONFIG_HARDENED_USERCOPY=y, this will result in the checks then performed in copy_to_iter() oopsing with something like the following: CIFS: Attempting to mount //172.31.9.1/test CIFS: VFS: RDMA transport established usercopy: Kernel memory exposure attempt detected from SLUB object 'smbd_response_0000000091e24ea1' (offset 81, size 63)! ------------[ cut here ]------------ kernel BUG at mm/usercopy.c:102! ... RIP: 0010:usercopy_abort+0x6c/0x80 ... Call Trace: <TASK> __check_heap_object+0xe3/0x120 __check_object_size+0x4dc/0x6d0 smbd_recv+0x77f/0xfe0 [cifs] cifs_readv_from_socket+0x276/0x8f0 [cifs] cifs_read_from_socket+0xcd/0x120 [cifs] cifs_demultiplex_thread+0x7e9/0x2d50 [cifs] kthread+0x396/0x830 ret_from_fork+0x2b8/0x3b0 ret_from_fork_asm+0x1a/0x30 The problem is that the smbd_response slab's packet field isn't marked as being permitted for usercopy. Fix this by passing parameters to kmem_slab_create() to indicate that copy_to_iter() is permitted from the packet region of the smbd_response slab objects, less the header space.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: xsk: Fix unlocked writing to ICOSQ During napi poll, when the affinity changes and there's still XSK work to be done, we trigger an ICOSQ interrupt on the new CPU. However, this triggering on the ICOSQ is done unprotected. There are 2 such races: A) mlx5e_trigger_irq() is called while mlx5e_xsk_alloc_rx_mpwqe() is running from a different CPU due to affinity change. This can happen because IRQ triggering is done after napi_complete_done(). At this point the NAPI can be scheduled on a different CPU. Like this: CPU A (old affinity, NAPI tail) CPU B (new affinity, fresh NAPI) ------------------------------- -------------------------------- napi_complete_done() clears SCHED mlx5e_cq_arm(...) napi_schedule_prep() sets SCHED mlx5e_napi_poll() mlx5e_xsk_alloc_rx_mpwqe() mlx5e_icosq_sync_lock() // noop memcpy 640 B UMR body advance sq->pc by 10 mlx5e_trigger_irq(&c->icosq) wqe_info[pi] = {NOP, 1} mlx5e_post_nop() advances sq->pc B) mlx5e_trigger_irq() is called on the ICOSQ when mlx5e_trigger_napi_icosq() is running. The obvious fix would be to lock the ICOSQ. But ICOSQ has an optimized locking scheme that doesn't work for this scenario. Kick the async ICOSQ instead which is always locked. This issue was noticed in the wild with the following splat: netdevice: ge-0-0-1: Bad OP in ICOSQ CQE: 0xd WARNING: drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:826 [...] [...] Call Trace: <IRQ> mlx5e_napi_poll+0x11d/0x7f0 [mlx5_core] __napi_poll+0x30/0x200 ? skb_defer_free_flush+0x9c/0xc0 net_rx_action+0x2fe/0x3f0 handle_softirqs+0xd8/0x340 __irq_exit_rcu+0xbc/0xe0 common_interrupt+0x85/0xa0 </IRQ> <TASK> asm_common_interrupt+0x26/0x40 [...] ---[ end trace 0000000000000000 ]--- mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2022, qn 0x8f4, opcode 0xd, syndrome 0x2, vendor syndrome 0x68 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000030: 00 00 00 00 01 00 68 02 01 00 08 f4 de 14 59 d2 WQE DUMP: WQ size 16384 WQ cur size 0, WQE index 0x1e14, len: 64 00000000: 00 00 00 01 d9 ed 80 02 00 00 00 01 d9 ed 90 02 00000010: 00 00 00 01 d9 ed a0 02 00 00 00 01 d9 ed b0 02 00000020: 00 00 00 01 d9 ed c0 02 00 00 00 01 d9 ed d0 02 00000030: 00 00 00 01 d9 ed e0 02 00 00 00 01 d9 ed f0 02 mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2023, qn 0x8f4, opcode 0xd, syndrome 0x5, vendor syndrome 0xf9 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000030: 00 00 00 00 01 00 f9 05 01 00 08 f4 de 15 cf d2

crypto/ahash.c in the Linux kernel through 4.10.9 allows attackers to cause a denial of service (API operation calling its own callback, and infinite recursion) by triggering EBUSY on a full queue.