A hard coded password in Super Store Finder v3.6 allows attackers to access the administration panel.

International Datacasting Corporation (IDC) SFX Series SuperFlex(SFX2100) SatelliteReceiver contains hardcoded and insecure credentials for the `admin` account. A remote unauthenticated attacker can use these undocumented credentials to access the satellite system directly via the Telnet service, leading to potential system compromise.

N.V.K.INTER CO., LTD. (NVK) iBSG v3.5 was discovered to contain a hardcoded root password which allows attackers to login with root privileges via the SSH service.

The /irmdata/api/ endpoints exposed by the IRM Next Generation booking engine authenticates requests using HMAC tokens. These tokens are however exposed in a JavaScript file loaded on the client side, thus rendering this extra safety mechanism useless.

OpenC3 COSMOS before v6.0.2 was discovered to contain hardcoded credentials for the Service Account.

Vasion Print (formerly PrinterLogic) before Virtual Appliance Host 22.0.933 Application 20.0.2368 allows Hardcoded AWS API Key V-2024-006.

The affected devices use publicly available default credentials with administrative privileges.

International Datacasting Corporation (IDC) SFX2100 Satellite Receiver, trivial password for the `user` (usr) account. A remote unauthenticated attacker can exploit this to gain unauthorized SSH access to the system, while intially dropped into a restricted shell, an attacker can trivially spawn a complete pty to gain an appropriately interactive shell.

ALLNET ALL-RUT22GW v3.3.8 was discovered to store hardcoded credentials in the libicos.so library.

International Datacasting Corporation (IDC) SFX Series SuperFlex SatelliteReceiver contains hardcoded credentials for the `monitor` account. A remote unauthenticated attacker can use these trivial, undocumented credentials to access the system via SSH. While initially dropped into a restricted shell, the attacker can trivially break out to achieve standard shell functionality.

Default and unremovable support credentials (user:nwk password:nwk2) allow attackers to gain total super user control of an IoT device through a TELNET session to products using the RadioRA 2 Lutron integration protocol Revision M to Revision Y. NOTE: The vendor disputes this id as not being a vulnerability because what can be done through the ports revolve around controlling lighting, not code execution. A certain set of commands are listed, which bear some similarity to code, but they are not arbitrary and do not allow admin-level control of a machine

JBL soundbar multibeam 5.1 - CWE-798: Use of Hard-coded Credentials

A vulnerability has been identified in CP-8031 MASTER MODULE (All versions < CPCI85 V05.11 (only with activated debug support)), CP-8050 MASTER MODULE (All versions < CPCI85 V05.11 (only with activated debug support)). The affected devices contain a hard-coded ID in the SSH `authorized_keys` configuration file. An attacker with knowledge of the corresponding private key could login to the device via SSH. Only devices with activated debug support are affected.

PiiGAB M-Bus contains hard-coded credentials which it uses for authentication.

AMI SPx contains a vulnerability in the BMC where an Attacker may cause a use of hard-coded cryptographic key by a hard-coded certificate. A successful exploit of this vulnerability may lead to a loss of confidentiality, integrity, and availability. 

Vue Vben Admin 2.10.1 allows unauthorized login to the backend due to an issue with hardcoded credentials.

International Datacasting Corporation (IDC) SFX Series SuperFlex Satellite Receiver contains undocumented, hardcoded/insecure credentials for the `xd` user account. A remote unauthenticated attacker can log in via FTP using these credentials. Because the `xd` user has write permissions to their home directory where root-executed binaries and symlinks (such as those invoked by `xdstartstop`) are stored, the attacker can overwrite these files or manipulate symlinks to achieve arbitrary code execution as the root user.

A hardcoded credential vulnerability exists in a specific deployment pattern for Esri Portal for ArcGIS versions 11.4 and below that may allow a remote unauthenticated attacker to gain administrative access to the system.

The firmware of all Wattsense Bridge devices contain the same hard-coded user and root credentials. The user password can be easily recovered via password cracking attempts. The recovered credentials can be used to log into the device via the login shell that is exposed by the serial interface. The backdoor user has been removed in firmware BSP >= 6.4.1.

Trango Apex <= 2.1.1, ApexLynx < 2.0, ApexOrion < 2.0, ApexPlus <= 3.2.0, Giga <= 2.6.1, GigaLynx < 2.0, GigaOrion < 2.0, GigaPlus <= 3.2.3, GigaPro <= 1.4.1, StrataLink < 3.0, and StrataPro devices have a built-in, hidden root account, with a default password that was once stored in cleartext within a software update package on a Trango FTP server. This account is accessible via SSH and/or TELNET, and grants access to the underlying embedded UNIX OS on the device, allowing full control over it.

An authentication bypass vulnerability exists in the Web Application functionality of Moxa MXView Series 3.2.4. A specially-crafted HTTP request can lead to unauthorized access. An attacker can send an HTTP request to trigger this vulnerability.

MXsecurity version 1.0 is vulnearble to hardcoded credential vulnerability. This vulnerability has been reported that can be exploited to craft arbitrary JWT tokens and subsequently bypass authentication for web-based APIs.

TeleAdapt RoomCast TA-2400 1.0 through 3.1 suffers from Use of a Hard-coded Password (PIN): 385521, 843646, and 592671.

Dromara Lamp-Cloud before v3.8.1 was discovered to use a hardcoded cryptographic key when creating and verifying a Json Web Token. This vulnerability allows attackers to authenticate to the application via a crafted JWT token.

Dromara Sureness before v1.0.8 was discovered to use a hardcoded key.

Synel SYnergy Fingerprint Terminals - CWE-798: Use of Hard-coded Credentials

A vulnerability has been found in Beetel 777VR1 up to 01.00.09. The impacted element is an unknown function of the component Web Management Interface. The manipulation leads to hard-coded credentials. The attack needs to be initiated within the local network. The exploit has been disclosed to the public and may be used. It is advisable to modify the configuration settings. The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device has a custom telnet daemon as a part of the busybox and retrieves the password from the shadow file using the function getspnam at address 0x00053894. Then performs a crypt operation on the password retrieved from the user at address 0x000538E0 and performs a strcmp at address 0x00053908 to check if the password is correct or incorrect. However, the /etc/shadow file is a part of CRAM-FS filesystem which means that the user cannot change the password and hence a hardcoded hash in /etc/shadow is used to match the credentials provided by the user. This is a salted hash of the string "admin" and hence it acts as a password to the device which cannot be changed as the whole filesystem is read only.

newbee-mall includes pre-seeded administrator accounts in its database initialization script. These accounts are provisioned with a predictable default password. Deployments that initialize or reset the database using the provided schema and fail to change the default administrative credentials may allow unauthenticated attackers to log in as an administrator and gain full administrative control of the application.

Binardat 10G08-0800GSM network switch firmware version V300SP10260209 and prior contain hard-coded administrative credentials that cannot be changed by users. Knowledge of these credentials allows full administrative access to the device.

Shenzen Tenda Technology IP Camera CP3 V11.10.00.2211041355 was discovered to contain a hard-coded default password for the RTSP feed.

The secret value used for access to critical UDS services of the MIB3 infotainment is hardcoded in the firmware. Vulnerability discovered on Škoda Superb III (3V3) - 2.0 TDI manufactured in 2022.

EMC ViPR SRM, EMC Storage M&R, EMC VNX M&R, EMC M&R for SAS Solution Packs (EMC ViPR SRM prior to 4.1, EMC Storage M&R prior to 4.1, EMC VNX M&R all versions, EMC M&R (Watch4Net) for SAS Solution Packs all versions) contain undocumented accounts with default passwords for Webservice Gateway and RMI JMX components. A remote attacker with the knowledge of the default password may potentially use these accounts to run arbitrary web service and remote procedure calls on the affected system.

DragonWave Horizon 1.01.03 wireless radios have hardcoded login credentials (such as the username of energetic and password of wireless) meant to allow the vendor to access the devices. These credentials can be used in the web interface or by connecting to the device via TELNET. This is fixed in recent versions including 1.4.8.

3DP-MANAGER is an inbound generator for 3x-ui. In version 2.0.1 and prior, the application automatically creates an administrative account with known default credentials (admin/admin) upon the first initialization. Attackers with network access to the application's login interface can gain full administrative control, managing VPN tunnels and system settings. This issue will be patched in version 2.0.2.

A vulnerability was found in 274056675 springboot-openai-chatgpt e84f6f5. It has been classified as critical. This affects an unknown part of the file /chatgpt-boot/src/main/java/org/springblade/modules/mjkj/controller/OpenController.java. The manipulation leads to hard-coded credentials. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The vendor was contacted early about this disclosure but did not respond in any way.

The database account and password are hardcoded, allowing login with the account to manipulate the database in MagicInfo9 Server.This issue affects MagicINFO 9 Server: less than 21.1090.1.

Rocket Software UniData versions prior to 8.2.4 build 3003 and UniVerse versions prior to 11.3.5 build 1001 or 12.2.1 build 2002 suffer from an authentication bypass vulnerability, where a special username with a deterministic password can be leveraged to bypass authentication checks and execute OS commands as the root user.

Osprey Pump Controller version 1.01 has a hidden administrative account that has the hardcoded password that allows full access to the web management interface configuration. The user is not visible in Usernames and Passwords menu list of the application and the password cannot be changed through any normal operation of the device.

netbox-docker before 2.5.0 has a superuser account with default credentials (admin password for the admin account, and 0123456789abcdef0123456789abcdef01234567 value for SUPERUSER_API_TOKEN). In practice on the public Internet, almost all users changed the password but only about 90% changed the token. Having a default token value was intentional and was valuable for the main intended use case of the netbox-docker product (isolated development networks). Some users engaged in an effort to repurpose netbox-docker for production. The documentation for this effort stated that the defaults must not be used. However, installation did not ensure non-default values. The Supplier was aware of the CVE ID assignment and did not object to the assignment.

The Motorola ACE1000 RTU through 2022-05-02 uses ECB encryption unsafely. It can communicate with an XRT LAN-to-radio gateway by means of an embedded client. Credentials for accessing this gateway are stored after being encrypted with the Tiny Encryption Algorithm (TEA) in ECB mode using a hardcoded key. Similarly, the ACE1000 RTU can route MDLC traffic over Extended Command and Management Protocol (XCMP) and Network Layer (XNL) networks via the MDLC driver. Authentication to the XNL port is protected by TEA in ECB mode using a hardcoded key.

Schneider Electric SoMachine Basic 1.4 SP1 and Schneider Electric Modicon TM221CE16R 1.3.3.3 devices have a hardcoded-key vulnerability. The Project Protection feature is used to prevent unauthorized users from opening an XML protected project file, by prompting the user for a password. This XML file is AES-CBC encrypted; however, the key used for encryption (SoMachineBasicSoMachineBasicSoMa) cannot be changed. After decrypting the XML file with this key, the user password can be found in the decrypted data. After reading the user password, the project can be opened and modified with the Schneider product.

Dragonfly is an open source P2P-based file distribution and image acceleration system. It is hosted by the Cloud Native Computing Foundation (CNCF) as an Incubating Level Project. Dragonfly uses JWT to verify user. However, the secret key for JWT, "Secret Key", is hard coded, which leads to authentication bypass. An attacker can perform any action as a user with admin privileges. This issue has been addressed in release version 2.0.9. All users are advised to upgrade. There are no known workarounds for this vulnerability.

The use of multiple hard-coded cryptographic keys in cSRX Series software in Juniper Networks Junos OS allows an attacker to take control of any instance of a cSRX deployment through device management services. This issue affects: Juniper Networks Junos OS on cSRX Series: All versions prior to 20.2R3; 20.3 versions prior to 20.3R2; 20.4 versions prior to 20.4R2.

An authentication bypass vulnerability exists in the web interface /action/factory* functionality of Abode Systems, Inc. iota All-In-One Security Kit 6.9X and 6.9Z. A specially-crafted HTTP header can lead to authentication bypass. An attacker can send an HTTP request to trigger this vulnerability.

A Hard Coded Admin Credentials issue in the Web-UI Admin Panel in Propius MachineSelector 6.6.0 and 6.6.1 allows remote attackers to gain access to the admin panel Propiusadmin.php, which allows taking control of the affected system.

An issue was discovered in BMC Control-M/MFT 9.0.20 through 9.0.22. A set of default debug user credentials is hardcoded in cleartext within the application package. If left unchanged, these credentials can be easily obtained and may allow unauthorized access to the MFT API debug interface.

Advantech R-SeeNet versions 2.4.22 is installed with a hidden root-level user that is not available in the users list. This hidden user has a password that cannot be changed by users.

Dr. ID Door Access Control and Personnel Attendance Management system uses the hard-code admin default credentials that allows remote attackers to access the system through the default password and obtain the highest permission.

Programi Bilanc Build 007 Release 014 31.01.2020 supplies a .exe file containing several hardcoded credentials to different servers that allow remote attackers to gain access to the complete infrastructure including the website, update server, and external issue tracking tools.