A flaw was found in Apache ShenYu Admin. The incorrect use of JWT in ShenyuAdminBootstrap allows an attacker to bypass authentication. This issue affected Apache ShenYu 2.3.0 and 2.4.0

Properly formatted POST requests to multiple resources on the HTTP and HTTPS web servers of the Digi PortServer TS 16 Rack device do not require authentication or authentication tokens. This vulnerability could allow an attacker to enable the SNMP service and manipulate the community strings to achieve further control in.

pam_krb5 authenticates a user by essentially running kinit with the password, getting a ticket-granting ticket (tgt) from the Kerberos KDC (Key Distribution Center) over the network, as a way to verify the password. However, if a keytab is not provisioned on the system, pam_krb5 has no way to validate the response from the KDC, and essentially trusts the tgt provided over the network as being valid. In a non-default FreeBSD installation that leverages pam_krb5 for authentication and does not have a keytab provisioned, an attacker that is able to control both the password and the KDC responses can return a valid tgt, allowing authentication to occur for any user on the system.

The authentication mechanism in PowerShield SNMP Web Pro 1.1 contains a vulnerability that allows unauthenticated users to directly access Common Gateway Interface (CGI) scripts without proper identification or authorization. This vulnerability arises from a lack of proper cookie verification and affects all instances of SNMP Web Pro 1.1 without HTTP Digest authentication enabled, regardless of the password used for the web interface.

Cisco TelePresence Manager 1.2.x through 1.6.x allows remote attackers to bypass authentication and invoke arbitrary methods via a malformed SOAP request, aka Bug ID CSCtc59562.

Gotham Orbital-Simulator service prior to 0.692.0 was found to be vulnerable to a Path traversal issue allowing an unauthenticated user to read arbitrary files on the file system.

In TeslaMate before 1.27.2, there is unauthorized access to port 4000 for remote viewing and operation of user data. After accessing the IP address for the TeslaMate instance, an attacker can switch the port to 3000 to enter Grafana for remote operations. At that time, the default username and password can be used to enter the Grafana management console without logging in, a related issue to CVE-2022-23126.

Webauthn Framework 3.3.x before 3.3.4 has Incorrect Access Control. An attacker that controls a user's system is able to login to a vulnerable service using an attached FIDO2 authenticator without passing a check of the user presence.

The server components in Objectivity/DB 10.0 do not require authentication for administrative commands, which allows remote attackers to modify data, obtain sensitive information, or cause a denial of service by sending requests over TCP to (1) the Lock Server or (2) the Advanced Multithreaded Server, as demonstrated by commands that are ordinarily sent by the (a) ookillls and (b) oostopams applications. NOTE: some of these details are obtained from third party information.

WP Cerber before 8.9.3 allows MFA bypass via wordpress_logged_in_[hash] manipulation.

The ProfilePress Pro plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 4.11.1. This is due to insufficient verification on the user being returned by the social login token. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email and the user does not have an already-existing account for the service returning the token.

An unauthenticated user could log into iSTAR Ultra, iSTAR Ultra LT, iSTAR Ultra G2, and iSTAR Edge G2 with administrator rights.

The ESSearchApplication directory tree in IBM OmniFind Enterprise Edition 8.x and 9.x does not require authentication, which allows remote attackers to modify the server configuration via a request to palette.do.

Pointter PHP Micro-Blogging Social Network 1.8 allows remote attackers to bypass authentication and obtain administrative privileges via arbitrary values of the auser and apass cookies.

D-Link DSL-G256DG version vBZ_1.00.27 web management interface allows authentication bypass via an unspecified method.

Pega platform clients who are using versions 6.1 through 7.3.1 may be utilizing default credentials

OpenSSL before 1.0.0c, when J-PAKE is enabled, does not properly validate the public parameters in the J-PAKE protocol, which allows remote attackers to bypass the need for knowledge of the shared secret, and successfully authenticate, by sending crafted values in each round of the protocol.

The TCP-to-ODBC gateway in IBM Tivoli Provisioning Manager for OS Deployment 7.1.1.3 does not require authentication for SQL statements, which allows remote attackers to modify, create, or read database records via a session on TCP port 2020. NOTE: the vendor disputes this issue, stating that the "default Microsoft Access database is not password protected because it is intended to be used for evaluation purposes only.

Adobe ColdFusion 9.0, 9.0.1, and 9.0.2, when a password is not configured, allows remote attackers to bypass authentication and possibly execute arbitrary code via unspecified vectors, as exploited in the wild in January 2013.

Networking OS10, versions prior to October 2021 with Smart Fabric Services enabled, contains an authentication bypass vulnerability. A remote unauthenticated attacker could exploit this vulnerability to gain access and perform actions on the affected system.

It is possible to enumerate access card credentials via an unauthenticated network connection to the server in versions of Command Centre v8.20 prior to v8.20.1166(MR3), versions of 8.10 prior to v8.10.1211(MR5), versions of 8.00 prior to v8.00.1228(MR6), all versions of 7.90 and earlier. These credentials can then be used to encode low security cards to be used by the system where insecure card technologies are supported.

Pointter PHP Content Management System 1.0 allows remote attackers to bypass authentication and obtain administrative privileges via arbitrary values of the auser and apass cookies.

Multiple Services such as VHS(Video History Server) and VCD(Video Clip Distributor) and Clips2 were discovered to be vulnerable to an unauthenticated arbitrary file read/write vulnerability due to missing input validation on filenames. A malicious attacker could read sensitive files from the filesystem or write/delete arbitrary files on the filesystem as well.

Authentication Bypass Using an Alternate Path or Channel in temi Robox OS prior to120, temi Android app up to 1.3.7931 allows remote attackers to gain elevated privileges on the temi and have it automatically answer the attacker's calls, granting audio, video, and motor control via unspecified vectors.

HashiCorp Vault and Vault Enterprise versions 0.8.3 and newer, when configured with the GCP GCE auth method, may be vulnerable to authentication bypass. Fixed in 1.2.5, 1.3.8, 1.4.4, and 1.5.1.

Milesight NCR/camera version 71.8.0.6-r5 allows authentication bypass through an unspecified method.

An authentication bypass vulnerability exists in the OAS Engine functionality of Open Automation Software OAS Platform v18.00.0072. A specially-crafted series of network requests can lead to arbitrary authentication. An attacker can send a sequence of requests to trigger this vulnerability.

ESPv2 is a service proxy that provides API management capabilities using Google Service Infrastructure. ESPv2 2.20.0 through 2.42.0 contains an authentication bypass vulnerability. API clients can craft a malicious `X-HTTP-Method-Override` header value to bypass JWT authentication in specific cases. ESPv2 allows malicious requests to bypass authentication if both the conditions are true: The requested HTTP method is **not** in the API service definition (OpenAPI spec or gRPC `google.api.http` proto annotations, and the specified `X-HTTP-Method-Override` is a valid HTTP method in the API service definition. ESPv2 will forward the request to your backend without checking the JWT. Attackers can craft requests with a malicious `X-HTTP-Method-Override` value that allows them to bypass specifying JWTs. Restricting API access with API keys works as intended and is not affected by this vulnerability. Upgrade deployments to release v2.43.0 or higher to receive a patch. This release ensures that JWT authentication occurs, even when the caller specifies `x-http-method-override`. `x-http-method-override` is still supported by v2.43.0+. API clients can continue sending this header to ESPv2.

Unverified Password Change in GitHub repository tsolucio/corebos prior to 8.

A vulnerability in the external authentication functionality of Cisco Secure Email and Web Manager, formerly known as Cisco Security Management Appliance (SMA), and Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass authentication and log in to the web management interface of an affected device. This vulnerability is due to improper authentication checks when an affected device uses Lightweight Directory Access Protocol (LDAP) for external authentication. An attacker could exploit this vulnerability by entering a specific input on the login page of the affected device. A successful exploit could allow the attacker to gain unauthorized access to the web-based management interface of the affected device.

iked in OpenIKED, as used in OpenBSD through 6.7, allows authentication bypass because ca.c has the wrong logic for checking whether a public key matches.

There is an improper authentication vulnerability in Hero-CT060 before 1.0.0.200. The vulnerability is due to that when an user wants to do certain operation, the software does not insufficiently validate the user's identity. Successful exploit could allow the attacker to do certain operations which the user are supposed not to do.

The authenticate function in LDAPUserFolder/LDAPUserFolder.py in zope-ldapuserfolder 2.9-1 does not verify the password for the emergency account, which allows remote attackers to gain privileges.

Insufficient authentication in the MQTT backend (broker) allows an attacker to access and even manipulate the telemetry data of the entire fleet of vehicles using the HopeChart HQT-401 telematics unit. Other models are possibly affected too. Multiple vulnerabilities were identified: - The MQTT backend does not require authentication, allowing unauthorized connections from an attacker. - The vehicles publish their telemetry data (e.g. GPS Location, speed, odometer, fuel, etc) as messages in public topics. The backend also sends commands to the vehicles as MQTT posts in public topics. As a result, an attacker can access the confidential data of the entire fleet that is managed by the backend. - The MQTT messages sent by the vehicles or the backend are not encrypted or authenticated. An attacker can create and post messages to impersonate a vehicle or the backend. The attacker could then, for example, send incorrect information to the backend about the vehicle's location. - The backend can inject data into a vehicle´s CAN bus by sending a specific MQTT message on a public topic. Because these messages are not authenticated or encrypted, an attacker could impersonate the backend, create a fake message and inject CAN data in any vehicle managed by the backend. The confirmed version is 201808021036, however further versions have been also identified as potentially impacted.

Apache Shiro before 1.7.0, when using Apache Shiro with Spring, a specially crafted HTTP request may cause an authentication bypass.

An issue in the helper tool of Mailbutler GmbH Shimo VPN Client for macOS v5.0.4 allows attackers to bypass authentication via PID re-use.

An Authentication Bypass vulnerability exists in Flowise version 1.8.2. This could allow a remote, unauthenticated attacker to access API endpoints as an administrator and allow them to access restricted functionality.

MMP: All versions prior to v1.0.3, PTP C-series: Device versions prior to v2.8.6.1, and PTMP C-series and A5x: Device versions prior to v2.5.4.1 does not perform proper authorization and authentication checks on multiple API routes. An attacker may gain access to these API routes and achieve remote code execution, create a denial-of-service condition, and obtain sensitive information.

An authentication bypass vulnerability has been identified in Pulpcore when deployed with Gunicorn versions prior to 22.0, due to the puppet-pulpcore configuration. This issue arises from Apache's mod_proxy not properly unsetting headers because of restrictions on underscores in HTTP headers, allowing authentication through a malformed header. This flaw impacts all active Satellite deployments (6.13, 6.14 and 6.15) which are using Pulpcore version 3.0+ and could potentially enable unauthorized users to gain administrative access.

Improper Authentication vulnerability in Easy Digital Downloads plugin allows unauth. Privilege Escalation. This issue affects Easy Digital Downloads: from 3.1 through 3.1.1.4.1.

Affected versions of Smartstore have a missing WebApi Authentication attribute. This vulnerability affects Smartstore shops in version 4.0.0 & 4.0.1 which have installed and activated the Web API plugin. Users of Smartstore 4.0.0 and 4.0.1 must merge their repository with 4.0.x or overwrite the file SmartStore.Web.Framework in the */bin* directory of the deployed shop with this file. As a workaround without updating uninstall the Web API plugin to close this vulnerability.

Improper authentication vulnerability exists in KB-AHR series and KB-IRIP series. If this vulnerability is exploited, an arbitrary OS command may be executed on the product or the device settings may be altered. Affected products and versions are as follows: KB-AHR04D versions prior to 91110.1.101106.78, KB-AHR08D versions prior to 91210.1.101106.78, KB-AHR16D versions prior to 91310.1.101106.78, KB-IRIP04A versions prior to 95110.1.100290.78A, KB-IRIP08A versions prior to 95210.1.100290.78A, and KB-IRIP16A versions prior to 95310.1.100290.78A.

A vulnerability has been identified in SIMATIC HMI Unified Comfort Panels (All versions <= V16). Affected devices insufficiently validate authentication attempts as the information given can be truncated to match only a set number of characters versus the whole provided string. This could allow a remote attacker to discover user passwords and obtain access to the Sm@rt Server via a brute-force attack.

Mida eFramework through 2.9.0 has a back door that permits a change of the administrative password and access to restricted functionalities, such as Code Execution.

A vulnerability in the IPSec VPN Server authentication functionality of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to bypass authentication controls and access the IPSec VPN network. This vulnerability is due to the improper implementation of the password validation algorithm. An attacker could exploit this vulnerability by logging in to the VPN from an affected device with crafted credentials. A successful exploit could allow the attacker to bypass authentication and access the IPSec VPN network. The attacker may obtain privileges that are the same level as an administrative user, depending on the crafted credentials that are used. Cisco has not released software updates that address this vulnerability.

Rocket Software UniData versions prior to 8.2.4 build 3003 and UniVerse versions prior to 11.3.5 build 1001 or 12.2.1 build 2002 suffer from an authentication bypass vulnerability, where a special username with a deterministic password can be leveraged to bypass authentication checks and execute OS commands as the root user.

An Improper Authentication vulnerability in upload-file.php, used by the J-Web component of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to upload arbitrary files to temporary folders on the device. This issue affects Juniper Networks Junos OS: All versions prior to 19.4R3-S11; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S7; 20.3 version 20.3R1 and later versions; 20.4 versions prior to 20.4R3-S6; 21.1 version 21.1R1 and later versions; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R3-S1; 22.2 versions prior to 22.2R2-S1, 22.2R3; 22.3 versions prior to 22.3R1-S2, 22.3R2.

Mahara before 1.0.15, 1.1.x before 1.1.9, and 1.2.x before 1.2.5 has improper configuration options for authentication plugins associated with logins that use the single sign-on (SSO) functionality, which allows remote attackers to bypass authentication via an empty password. NOTE: some of these details are obtained from third party information.

A security flaw has been discovered in code-projects Contact Management System 1.0. This affects an unknown part of the component CRUD Endpoint. The manipulation of the argument ID results in improper authentication. The attack may be launched remotely.

Xigla Software Absolute Control Panel XE 1.5 allows remote attackers to bypass authentication and gain administrative access by setting a cookie to a certain value.