Uncontrolled Resource Consumption vulnerability in Honeywell Niagara Framework on Windows, Linux, QNX allows Content Spoofing.This issue affects Niagara Framework: before Niagara AX 3.8.1, before Niagara 4.1.

Starting in Python 3.12.0, the asyncio._SelectorSocketTransport.writelines() method would not "pause" writing and signal to the Protocol to drain the buffer to the wire once the write buffer reached the "high-water mark". Because of this, Protocols would not periodically drain the write buffer potentially leading to memory exhaustion. This vulnerability likely impacts a small number of users, you must be using Python 3.12.0 or later, on macOS or Linux, using the asyncio module with protocols, and using .writelines() method which had new zero-copy-on-write behavior in Python 3.12.0 and later. If not all of these factors are true then your usage of Python is unaffected.

Some HTTP/2 implementations are vulnerable to a reset flood, potentially leading to a denial of service. The attacker opens a number of streams and sends an invalid request over each stream that should solicit a stream of RST_STREAM frames from the peer. Depending on how the peer queues the RST_STREAM frames, this can consume excess memory, CPU, or both.

A vulnerability in the implementation of the Border Gateway Protocol (BGP) module in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of certain BGP packets. An attacker could exploit this vulnerability by sending a crafted BGP packet. A successful exploit could allow the attacker to cause a DoS condition on the affected device.

Some HTTP/2 implementations are vulnerable to ping floods, potentially leading to a denial of service. The attacker sends continual pings to an HTTP/2 peer, causing the peer to build an internal queue of responses. Depending on how efficiently this data is queued, this can consume excess CPU, memory, or both.

Some HTTP/2 implementations are vulnerable to window size manipulation and stream prioritization manipulation, potentially leading to a denial of service. The attacker requests a large amount of data from a specified resource over multiple streams. They manipulate window size and stream priority to force the server to queue the data in 1-byte chunks. Depending on how efficiently this data is queued, this can consume excess CPU, memory, or both.

qpid-cpp: ACL policies only loaded if the acl-file option specified enabling DoS by consuming all available file descriptors

Uncontrolled Resource Consumption vulnerability in PlexTrac allows WebSocket DoS.This issue affects PlexTrac: from 1.61.3 before 2.8.1.

Denial-of-service in the DOM: Service Workers component. This vulnerability affects Firefox < 147 and Thunderbird < 147.

An issue was discovered in Open5gs v2.7.2. InitialUEMessage, Registration request sent at a specific time can crash AMF due to incorrect error handling of gmm_state_exception() function upon receipt of the Nausf_UEAuthentication_Authenticate response.

A prototype pollution in the lib.merge function of xe-utils v3.5.31 allows attackers to cause a Denial of Service (DoS) via supplying a crafted payload.

A denial-of-service issue was discovered in MediaWiki 1.37.x before 1.37.2. Rendering of w/index.php?title=Special%3AWhatLinksHere&target=Property%3AP31&namespace=1&invert=1 can take more than thirty seconds. There is a DDoS risk.

A vulnerability has been identified in SINAMICS PERFECT HARMONY GH180 with NXG I control, MLFBs: 6SR2...-, 6SR3...-, 6SR4...- (All Versions with option G28), SINAMICS PERFECT HARMONY GH180 with NXG II control, MLFBs: 6SR2...-, 6SR3...-, 6SR4...- (All Versions with option G28). A denial of service vulnerability exists in the affected products. The vulnerability could be exploited by an attacker with network access to the device. Successful exploitation requires no privileges and no user interaction. An attacker could use the vulnerability to compromise availability of the affected system. At the time of advisory publication no public exploitation of this security vulnerability was known.

FON2601E-SE, FON2601E-RE, FON2601E-FSW-S, and FON2601E-FSW-B with firmware versions 1.1.7 and earlier contain an issue where they may behave as open resolvers. If this vulnerability is exploited, FON routers may be leveraged for DNS amplification attacks to some other entities.

Mitsubishi Electric Q03/04/06/13/26UDVCPU: serial number 20081 and prior, Q04/06/13/26UDPVCPU: serial number 20081 and prior, and Q03UDECPU, Q04/06/10/13/20/26/50/100UDEHCPU: serial number 20101 and prior. A remote attacker can send specific bytes over Port 5007 that will result in an Ethernet stack crash and disruption to USB communication.

With pipelining enabled each incoming query on a TCP connection requires a similar resource allocation to a query received via UDP or via TCP without pipelining enabled. A client using a TCP-pipelined connection to a server could consume more resources than the server has been provisioned to handle. When a TCP connection with a large number of pipelined queries is closed, the load on the server releasing these multiple resources can cause it to become unresponsive, even for queries that can be answered authoritatively or from cache. (This is most likely to be perceived as an intermittent server problem).

On BIG-IP 14.1.0-14.1.2, 14.0.0-14.0.1, and 13.1.0-13.1.1, undisclosed HTTP requests may consume excessive amounts of systems resources which may lead to a denial of service.

In WhatsUp Gold versions released before 2023.1.3, an uncontrolled resource consumption vulnerability exists. A specially crafted unauthenticated HTTP request to the TestController Chart functionality can lead to denial of service.

A vulnerability, which was classified as problematic, has been found in Tongda OA 2017 up to 11.7. This issue affects some unknown processing of the file /inc/package_static_resources.php. The manipulation leads to resource consumption. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

Werkzeug is a Web Server Gateway Interface web application library. Applications using `werkzeug.formparser.MultiPartParser` corresponding to a version of Werkzeug prior to 3.0.6 to parse `multipart/form-data` requests (e.g. all flask applications) are vulnerable to a relatively simple but effective resource exhaustion (denial of service) attack. A specifically crafted form submission request can cause the parser to allocate and block 3 to 8 times the upload size in main memory. There is no upper limit; a single upload at 1 Gbit/s can exhaust 32 GB of RAM in less than 60 seconds. Werkzeug version 3.0.6 fixes this issue.

By sending a specially crafted push message, a remote server could have hung the parent process, causing the browser to become unresponsive. This vulnerability affects Firefox < 132, Firefox ESR < 128.4, Thunderbird < 128.4, and Thunderbird < 132.

The WBM web application on firmwares prior to 03.02.02 and 03.01.07 on the WAGO PFC100 and PFC2000, respectively, runs on a lighttpd web server and makes use of the FastCGI module, which is intended to provide high performance for all Internet applications without the penalties of Web server APIs. However, the default configuration of this module appears to limit the number of concurrent php-cgi processes to two, which can be abused to cause a denial of service of the entire web server. This affects WAGO PFC200 Firmware version 03.00.39(12) and version 03.01.07(13), and WAGO PFC100 Firmware version 03.00.39(12) and version 03.02.02(14).

There is a possible denial of service vulnerability in Action View (Rails) <5.2.2.1, <5.1.6.2, <5.0.7.2, <4.2.11.1 where specially crafted accept headers can cause action view to consume 100% cpu and make the server unresponsive.

An exploitable denial-of-service vulnerability exists in the Weave daemon of the Nest Cam IQ Indoor, version 4620002. A set of TCP connections can cause unrestricted resource allocation, resulting in a denial of service. An attacker can connect multiple times to trigger this vulnerability.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.8, a large input buffer to the to_lowercase, to_uppercase, strip_whitespace, compress_whitespace, dotprefix, header_lowercase, strip_pseudo_headers, url_decode, or xor transform can lead to a stack overflow causing Suricata to crash. The issue has been addressed in Suricata 7.0.8.

An issue in the Proxygen handling of HTTP2 parsing of headers/trailers can lead to a denial-of-service attack. This affects Proxygen prior to v2018.12.31.00.

An issue in KiloView Dual Channel 4k HDMI & 3G-SDI HEVC Video Encoder Firmware v.1.20.0006 allows a remote attacker to cause a denial of service via the systemctrl API System/reFactory component.

IBM Cognos Analytics 11.0, and 11.1 is vulnerable to a denial of service attack that could allow a remote user to send specially crafted requests that would consume all available CPU and memory resources. IBM X-Force ID: 158973.

CUPS cups-browsed before 2.5b1 will send an HTTP POST request to an arbitrary destination and port in response to a single IPP UDP packet requesting a printer to be added, a different vulnerability than CVE-2024-47176. (The request is meant to probe the new printer but can be used to create DDoS amplification attacks.)

IBM WebSphere Application Server 7.0, 8.0, 8.5, and 9.0 is vulnerable to a denial of service, caused by improper handling of request headers. A remote attacker could exploit this vulnerability to cause the consumption of Memory. IBM X-Force ID: 156242.

Uncontrolled resource consumption vulnerability in SE-elektronic GmbH E-DDC3.3 affecting versions 03.07.03 and higher. An attacker could interrupt the availability of the administration panel by sending multiple ICMP packets.

A potential denial-of-service issue in the Proxygen handling of invalid HTTP2 priority settings (specifically a circular dependency). This affects Proxygen prior to v2018.12.31.00.

Process residence vulnerability in abnormal scenarios in the print module Impact: Successful exploitation of this vulnerability may affect power consumption.

An issue in nanomq v0.22.7 allows attackers to cause a Denial of Service (DoS) via a crafted request. The number of data packets received in the recv-q queue of the Nanomq process continues to increase, causing the nanomq broker to fall into a deadlock and be unable to provide normal services.

encoded_id-rails versions before 1.0.0.beta2 are affected by an uncontrolled resource consumption vulnerability. A remote and unauthenticated attacker might cause a denial of service condition by sending an HTTP request with an extremely long "id" parameter.

Windows Remote Desktop Services Denial of Service Vulnerability

Bematech (formerly Logic Controls, now Elgin) MP-4200 TH printer contains a denial of service vulnerability in the admin configuration page. Remote attackers can send crafted POST requests with malformed 'admin' and 'person' parameters to crash the printer's web service, causing a denial of service condition.

A flaw was found in StarWind iSCSI target. An attacker could script standard iSCSI Initiator operation(s) to exhaust the StarWind service socket, which could lead to denial of service. This affects iSCSI SAN (Windows Native) Version 3.2.2 build 2007-02-20.

A vulnerability in the PROFINET stack implementation of the IndraDrive (all versions) of Bosch Rexroth allows an attacker to cause a denial of service, rendering the device unresponsive by sending arbitrary UDP messages.

Linux kernel versions 4.9+ can be forced to make very expensive calls to tcp_collapse_ofo_queue() and tcp_prune_ofo_queue() for every incoming packet which can lead to a denial of service.

libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned about a server's certificate chain.Due to an erroneous function, a malicious server could make libcurl built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.

An Uncontrolled Resource Consumption vulnerability in the http daemon (httpd) of Juniper Networks Junos OS on SRX Series, QFX Series, MX Series and EX Series allows an unauthenticated, network-based attacker to cause Denial-of-Service (DoS). An attacker can send specific HTTPS connection requests to the device, triggering the creation of processes that are not properly terminated. Over time, this leads to resource exhaustion, ultimately causing the device to crash and restart. The following command can be used to monitor the resource usage: user@host> show system processes extensive | match mgd | count This issue affects Junos OS on SRX Series and EX Series: All versions before 21.4R3-S7, from 22.2 before 22.2R3-S4, from 22.3 before 22.3R3-S3, from 22.4 before 22.4R3-S2, from 23.2 before 23.2R2-S1, from 23.4 before 23.4R1-S2, 23.4R2.

An issue was discovered in Iglu Server 0.13.0 and below. It involves sending very large payloads to a particular API endpoint of Iglu Server and can render it completely unresponsive. If the operation of Iglu Server is not restored, event processing in the pipeline would eventually halt.

OPC UA .NET Standard Stack 1.04.368 allows a remote attacker to cause a server to crash via a large number of messages that trigger Uncontrolled Resource Consumption.

NetGear WNDR4700 Media Server devices with firmware 1.0.0.34 allow remote attackers to cause a denial of service (device crash).

An issue was discovered in Samsung Mobile Processor Exynos 2200, 1480, and 2400. The absence of a null check leads to a Denial of Service at amdgpu_cs_ib_fill in the Xclipse Driver.

A vulnerability has been identified in SINEC INS (All versions < V1.0 SP2 Update 3). The affected application does not properly restrict the size of generated log files. This could allow an unauthenticated remote attacker to trigger a large amount of logged events to exhaust the system's resources and create a denial of service condition.

Remote denial of service vulnerability in LAN Messenger affecting version 3.4.0. This vulnerability allows an attacker to crash the LAN Messenger service by sending a long string directly and continuously over the UDP protocol.