Inadequate validation of permissions when employing remote tools and macros within Devolutions Remote Desktop Manager versions 2023.2.19 and earlier permits a user to initiate a connection without proper execution rights via the remote tools feature.

In TOTOLINK EX1200T firmware 4.1.2cu.5215, an attacker can bypass login by sending a specific request through formLoginAuth.htm.

Remote command execution due to use of default passwords. The following products are affected: Acronis Cyber Infrastructure (ACI) before build 5.0.1-61, Acronis Cyber Infrastructure (ACI) before build 5.1.1-71, Acronis Cyber Infrastructure (ACI) before build 5.2.1-69, Acronis Cyber Infrastructure (ACI) before build 5.3.1-53, Acronis Cyber Infrastructure (ACI) before build 5.4.4-132.

Veritas APTARE versions prior to 10.4 included code that bypassed the normal login process when specific authentication credentials were provided to the server.

An improper authentication vulnerability in SSL VPN in FortiOS 6.4.0, 6.2.0 to 6.2.3, 6.0.9 and below may result in a user being able to log in successfully without being prompted for the second factor of authentication (FortiToken) if they changed the case of their username.

This vulnerability allows remote attackers to bypass authentication on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of SSH port forwarding requests during initial setup. The issue results from the lack of proper authentication prior to establishing SSH port forwarding rules. An attacker can leverage this vulnerability to escalate privileges to resources normally protected from the WAN interface. Was ZDI-CAN-9664.

A vulnerability, which was classified as very critical, was found in Netgear DGND3700 1.1.00.15_1.00.15NA. This affects an unknown part of the file /BRS_top.html of the component Basic Authentication. The manipulation leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. Other products might be affected as well. The vendor was contacted early about this disclosure.

eLabFTW is an electronic lab notebook manager for research teams. In versions prior to 4.2.0 there is a vulnerability which allows an attacker to authenticate as an existing user, if that user was created using a single sign-on authentication option such as LDAP or SAML. It impacts instances where LDAP or SAML is used for authentication instead of the (default) local password mechanism. Users should upgrade to at least version 4.2.0.

An Authentication Bypass vulnerability exists in DELL SonicWALL Global Management System (GMS) 4.1, 5.0, 5.1, 6.0, and 7.0, Analyzer 7.0, Universal Management Appliance (UMA) 5.1, 6.0, and 7.0 and ViewPoint 4.1, 5.0, and 6.0 via a crafted request to the SGMS interface, which could let a remote malicious user obtain administrative access.

An authentication bypass vulnerability in the /web/um_open_telnet.cgi endpoint in Nexxt Solutions NCM-X1800 Mesh Router firmware UV1.2.7 and below, allowing an attacker to remotely enable the Telnet service without authentication, bypassing security controls. The Telnet server is then accessible with hard-coded credentials, allowing attackers to gain administrative shell access and execute arbitrary commands on the device.

An Authentication Bypass Vulnerability exists in DELL SonicWALL Analyzer 7.0, Global Management System (GMS) 4.1, 5.0, 5.1, 6.0, and 7.0; Universal Management Appliance (UMA) 5.1, 6.0, and 7.0 and ViewPoint 4.1, 5.0, 5.1, and 6.0 via the skipSessionCheck parameter to the UMA interface (/appliance/), which could let a remote malicious user obtain access to the root account.

JeeWMS 771e4f5d0c01ffdeae1671be4cf102b73a3fe644 (2025-05-19) contains incorrect authentication bypass vulnerability, which can lead to arbitrary file reading.

A vulnerability classified as critical was found in Telecommunication Software SAMwin Contact Center Suite 5.1. This vulnerability affects the function passwordScramble in the library SAMwinLIBVB.dll of the component Password Handler. Incorrect implementation of a hashing function leads to predictable authentication possibilities. Upgrading to version 6.2 is able to address this issue. It is recommended to upgrade the affected component.

XSS Hunter Express before 2021-09-17 does not properly enforce authentication requirements for paths.

ECOA BAS controller suffers from an authentication bypass vulnerability. An unauthenticated attacker through cookie poisoning can remotely bypass authentication and disclose sensitive information and circumvent physical access controls in smart homes and buildings and manipulate HVAC.

Apache Shiro before 1.8.0, when using Apache Shiro with Spring Boot, a specially crafted HTTP request may cause an authentication bypass. Users should update to Apache Shiro 1.8.0.

DataEase is an open source business intelligence and data visualization tool. Prior to version 2.10.10, secret verification does not take effect successfully, so a user can use any secret to forge a JWT token. The vulnerability has been fixed in v2.10.10. No known workarounds are available.

JumpServer is an open source bastion host. When users enable MFA and use a public key for authentication, the Koko SSH server does not verify the corresponding SSH private key. An attacker could exploit a vulnerability by utilizing a disclosed public key to attempt brute-force authentication against the SSH service This issue has been patched in versions 3.6.5 and 3.5.6. Users are advised to upgrade. There are no known workarounds for this issue.

In the DES implementation, the affected product versions use a default key for encryption. Successful exploitation allows an attacker to obtain sensitive information and gain access to the network elements that are managed by the affected products versions. This issue affects * FOXMAN-UN product: FOXMAN-UN R16A, FOXMAN-UN R15B, FOXMAN-UN R15A, FOXMAN-UN R14B, FOXMAN-UN R14A, FOXMAN-UN R11B, FOXMAN-UN R11A, FOXMAN-UN R10C, FOXMAN-UN R9C; * UNEM product: UNEM R16A, UNEM R15B, UNEM R15A, UNEM R14B, UNEM R14A, UNEM R11B, UNEM R11A, UNEM R10C, UNEM R9C. List of CPEs: * cpe:2.3:a:hitachienergy:foxman-un:R16A:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R15B:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R15A:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R14B:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R14A:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R11B:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R11A:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R10C:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R9C:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R16A:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R15B:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R15A:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R14B:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R14A:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R11B:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R11A:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R10C:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R9C:*:*:*:*:*:*:*

An issue was discovered in the ALU unit of the OR1200 (aka OpenRISC 1200) processor 2011-09-10 through 2015-11-11. The overflow flag is not being updated for the msb and mac instructions, which results in an incorrect value in the overflow flag. Any software that relies on this flag may experience corruption in execution.

Grafana is an open source data visualization platform. In affected versions unauthenticated and authenticated users are able to view the snapshot with the lowest database key by accessing the literal paths: /dashboard/snapshot/:key, or /api/snapshots/:key. If the snapshot "public_mode" configuration setting is set to true (vs default of false), unauthenticated users are able to delete the snapshot with the lowest database key by accessing the literal path: /api/snapshots-delete/:deleteKey. Regardless of the snapshot "public_mode" setting, authenticated users are able to delete the snapshot with the lowest database key by accessing the literal paths: /api/snapshots/:key, or /api/snapshots-delete/:deleteKey. The combination of deletion and viewing enables a complete walk through all snapshot data while resulting in complete snapshot data loss. This issue has been resolved in versions 8.1.6 and 7.5.11. If for some reason you cannot upgrade you can use a reverse proxy or similar to block access to the literal paths: /api/snapshots/:key, /api/snapshots-delete/:deleteKey, /dashboard/snapshot/:key, and /api/snapshots/:key. They have no normal function and can be disabled without side effects.

OpUtils in Zoho ManageEngine OpManager 12.5 before 125490 mishandles authentication for a few audit directories.

An issue was discovered in the ALU unit of the OR1200 (aka OpenRISC 1200) processor 2011-09-10 through 2015-11-11. The overflow flag is not being updated correctly for the subtract instruction, which results in an incorrect value in the overflow flag. Any software that relies on this flag may experience corruption in execution.

In Jenkins WSO2 Oauth Plugin 1.0 and earlier, authentication claims are accepted without validation by the "WSO2 Oauth" security realm, allowing unauthenticated attackers to log in to controllers using this security realm using any username and any password, including usernames that do not exist.

An issue was discovered in LemonLDAP::NG (aka lemonldap-ng) 2.0.13. When using the RESTServer plug-in to operate a REST password validation service (for another LemonLDAP::NG instance, for example) and using the Kerberos authentication method combined with another method with the Combination authentication plug-in, any password will be recognized as valid for an existing user.

It was discovered that the api/storage web interface in Unitrends Backup (UB) before 10.0.0 has an issue in which one of its input parameters was not validated. A remote attacker could use this flaw to bypass authentication and execute arbitrary commands with root privilege on the target system.

It was possible to bypass 2FA for LDAP users and access some specific pages with Basic Authentication in GitLab 14.1.1 and above.

webctrl.cgi.elf on Christie Digital DWU850-GS V06.46 devices allows attackers to perform any desired action via a crafted query containing an unspecified Cookie header. Authentication bypass can be achieved by including an administrative cookie that the device does not validate.

It was discovered that the bpserverd proprietary protocol in Unitrends Backup (UB) before 10.0.0, as invoked through xinetd, has an issue in which its authentication can be bypassed. A remote attacker could use this issue to execute arbitrary commands with root privilege on the target system.

Netwrix Usercube before 6.0.215, in certain misconfigured on-premises installations, allows authentication bypass on deployment endpoints, leading to privilege escalation. This only occurs if the configuration omits the required restSettings.AuthorizedClientId and restSettings.AuthorizedSecret fields (for the POST /api/Deployment/ExportConfiguration and POST /api/Deployment endpoints).

The RegistrationMagic WordPress plugin made it possible for unauthenticated users to log in as any site user, including administrators, if they knew a valid username on the site due to missing identity validation in the social login function social_login_using_email() of the plugin. This affects versions equal to, and less than, 5.0.1.7.

An issue in Kloudq Technologies Limited Tor Equip 1.0, Tor Loco Mini 1.0 through 3.1 allows a remote attacker to execute arbitrary code via a crafted request to the MQTT component.

Loxone Miniserver devices with firmware before 11.1 (aka 11.1.9.3) are unable to use an authentication method that is based on the "signature of the update package." Therefore, these devices (or attackers who are spoofing these devices) can continue to use an unauthenticated cloud service for an indeterminate time period (possibly forever). Once an individual device's firmware is updated, and authentication occurs once, the cloud service recategorizes the device so that authentication is subsequently always required, and spoofing cannot occur.

WP Cerber before 8.9.3 allows MFA bypass via wordpress_logged_in_[hash] manipulation.

MaLion for Windows and Mac 5.0.0 to 5.2.1 allows remote attackers to bypass authentication to alter settings in Relay Service Server.

The BrowserID (Mozilla Persona) module 7.x-1.x before 7.x-1.3 for Drupal allows remote attackers to hijack the authentication of arbitrary users via the audience identifier.

An issue in Konga v0.14.9 allows attackers to bypass authentication via a crafted JWT token.

Improper Authentication vulnerability in Genians Genian NAC V4.0, Genians Genian NAC V5.0, Genians Genian NAC Suite V5.0, Genians Genian ZTNA allows Authentication Abuse.This issue affects Genian NAC V4.0: from V4.0.0 through V4.0.155; Genian NAC V5.0: from V5.0.0 through V5.0.42 (Revision 117460); Genian NAC Suite V5.0: from V5.0.0 through V5.0.54; Genian ZTNA: from V6.0.0 through V6.0.15.

The Limit Login Attempts plugin before 1.7.1 for WordPress does not clear auth cookies upon a lockout, which might make it easier for remote attackers to conduct brute-force authentication attempts.

YesWiki is a wiki system written in PHP. Prior to version 4.5.4, the request to commence a site backup can be performed and downloaded without authentication. The archives are created with a predictable filename, so a malicious user could create and download an archive without being authenticated. This could result in a malicious attacker making numerous requests to create archives and fill up the file system, or by downloading the archive which contains sensitive site information. This issue has been patched in version 4.5.4.

An improper authentication vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to compromise the security of the system via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.3.2578 build 20231110 and later QuTS hero h5.1.3.2578 build 20231110 and later QuTScloud c5.1.5.2651 and later

A vulnerability, which was classified as critical, was found in Itech Job Portal Script 9.13. This affects an unknown part of the file /admin. The manipulation leads to improper authentication. It is possible to initiate the attack remotely.

Schneider Electric Modicon Quantum PLC does not perform authentication between the Unity software and PLC, which allows remote attackers to cause a denial of service or possibly execute arbitrary code via unspecified vectors.

An issue in D-Link DI-8100 16.07.26A1 allows a remote attacker to bypass administrator login authentication

NETGEAR ProSAFE Network Management System MyHandlerInterceptor Authentication Bypass Vulnerability. This vulnerability allows remote attackers to bypass authentication on affected installations of NETGEAR ProSAFE Network Management System. Authentication is not required to exploit this vulnerability. The specific flaw exists within the MyHandlerInterceptor class. The issue results from improper implementation of the authentication mechanism. An attacker can leverage this vulnerability to bypass authentication on the system. . Was ZDI-CAN-19718.

An issue in the OTP mechanism of Chavara Family Welfare Centre Chavara Matrimony Site v2.0 allows attackers to bypass authentication via supplying a crafted request.

An Improper Authentication vulnerability in upload-file.php, used by the J-Web component of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to upload arbitrary files to temporary folders on the device. This issue affects Juniper Networks Junos OS: All versions prior to 19.4R3-S11; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S7; 20.3 version 20.3R1 and later versions; 20.4 versions prior to 20.4R3-S6; 21.1 version 21.1R1 and later versions; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R3-S1; 22.2 versions prior to 22.2R2-S1, 22.2R3; 22.3 versions prior to 22.3R1-S2, 22.3R2.

Open Access Management (OpenAM) is an access management solution that includes Authentication, SSO, Authorization, Federation, Entitlements and Web Services Security. OpenAM up to version 14.7.2 does not properly validate the signature of SAML responses received as part of the SAMLv1.x Single Sign-On process. Attackers can use this fact to impersonate any OpenAM user, including the administrator, by sending a specially crafted SAML response to the SAMLPOSTProfileServlet servlet. This problem has been patched in OpenAM 14.7.3-SNAPSHOT and later. User unable to upgrade should comment servlet `SAMLPOSTProfileServlet` from their pom file. See the linked GHSA for details.

In GeoVision GV-ADR2701 cameras, an attacker could edit the login response to access the web application.

The login REST API in ProLion CryptoSpike 3.0.15P2 (when LDAP or Active Directory is used as the users store) allows a remote blocked user to login and obtain an authentication token by specifying a username with different uppercase/lowercase character combination.