Hikvision DS-2CD7153-E IP Camera has security bypass via hardcoded credentials

Metacat is data repository software that helps researchers preserve, share, and discover data. Versions 2.0.0 and and above contain an unauthenticated SQL injection in the /harvesterRegistration endpoint. HarvesterRegistration.dbInsert() builds an INSERT against HARVEST_SITE_SCHEDULE via string concatenation, using a quoteString() helper that performs raw single-quote wrapping without escaping. Three request parameters reach the sink: unit, contactEmail, and documentListURL. The servlet does not verify a real LDAP identity. Allowing the vulnerable insert to proceed. Since the PostgreSQL backend permits stacked queries via Statement.executeUpdate(), this vulnerability allows full read/write/execute access in the Metacat database context. The vulnerability was remediated in Metacat 3.0.0.

OpenVPN Access Server 2.8.x before 2.8.1 allows LDAP authentication bypass (except when a user is enrolled in two-factor authentication).

On Aspire-derived NEC PBXes, including all versions of SV8100 devices, a set of documented, static login credentials may be used to access the DIM interface.

An Authentication Bypass vulnerability exists in NETGEAR Centria WNDR4700 Firmware 1.0.0.34 in http://<router_ip>/apply.cgi?/hdd_usr_setup.htm that when visited by any user, authenticated or not, causes the router to no longer require a password to access the web administration portal.

Aspire-derived NEC PBXes, including the SV8100, SV9100, SL1100 and SL2100 with software releases 7.0 or higher contain the possibility if incorrectly configured to allow a blank username and password combination to be entered as a valid, successfully authenticating account.

An authentication bypass exists in the web management interface in Belkin F5D8236-4 v2.

MFScripts YetiShare v3.5.2 through v4.5.4 might allow an attacker to reset a password by using a leaked hash (the hash never expires until used).

Huawei AR3200 products with versions of V200R007C00SPC900, V200R007C00SPCa00, V200R007C00SPCb00, V200R007C00SPCc00, V200R009C00SPC500 have an improper authentication vulnerability. Attackers need to perform some operations to exploit the vulnerability. Successful exploit may obtain certain permissions on the device.

Netgear WNR1000v3 with firmware before 1.0.2.60 contains an Authentication Bypass via the NtgrBak key.

JeeWMS 771e4f5d0c01ffdeae1671be4cf102b73a3fe644 (2025-05-19) contains incorrect authentication bypass vulnerability, which can lead to arbitrary file reading.

vtiger CRM 5.4.0 and earlier contain an Authentication Bypass Vulnerability due to improper authentication validation in the validateSession function.

In TOTOLINK EX1200T firmware 4.1.2cu.5215, an attacker can bypass login by sending a specific request through formLoginAuth.htm.

An Authentication Bypass vulnerability in Belkin N300 (F7D7301v1) router allows remote attackers to bypass authentication using "Javascript debugging."

Undocumented TELNET service in TRENDnet TEW-691GR and TEW-692GR when a web page named backdoor contains an HTML parameter of password and a value of j78G¬DFdg_24Mhw3.

In MIELE XGW 3000 ZigBee Gateway before 2.4.0, the Password Change Function does not require knowledge of the old password. This can be exploited in conjunction with CVE-2019-20480.

YMS VIS Pro is an information system for veterinary and food administration, veterinarians and farm. Due to a combination of improper method for system credentials generation and weak password policy, passwords can be easily guessed and enumerated through brute force attacks. Successful attacks can lead to unauthorised access and execution of operations based on assigned user permissions. This vulnerability affects VIS Pro in versions <= 3.3.0.6. This vulnerability has been mitigated by changes in authentication mechanisms and implementation of additional authentication layer and strong password policies.

NETGEAR Centria WNDR4700 devices with firmware 1.0.0.34 allow authentication bypass.

Belkin N900 router (F9K1104v1) contains an Authentication Bypass using "Javascript debugging".

An issue in Roadcute API v.1 allows a remote attacker to execute arbitrary code via the application exposing a password reset API endpoint that fails to validate the identity of the requester properly

Netgear WNR1000v3 with firmware before 1.0.2.60 contains an Authentication Bypass due to the server skipping checks for URLs containing a ".jpg".

libc in OpenBSD 6.6 allows authentication bypass via the -schallenge username, as demonstrated by smtpd, ldapd, or radiusd. This is related to gen/auth_subr.c and gen/authenticate.c in libc (and login/login.c and xenocara/app/xenodm/greeter/verify.c).

An issue was discovered on NETGEAR WNR1000V4 1.1.0.54 devices. The web management interface (setup.cgi) has an authentication bypass and other problems that ultimately allow an attacker to remotely compromise the device from a malicious webpage. The attacker sends an FW_remote.htm&todo=cfg_init request without a cookie, reads the Set-Cookie header in the 401 Unauthorized response, and then repeats the FW_remote.htm&todo=cfg_init request with the specified cookie.

Cisco Linksys E4200 1.0.05 Build 7 devices contain a Security Bypass Vulnerability which could allow remote attackers to gain unauthorized access.

A vulnerability in Trend Micro InterScan Web Security Virtual Appliance 6.5 may allow remote attackers to bypass authentication on affected installations of Trend Micro InterScan Web Security Virtual Appliance.

An issue was discovered in LemonLDAP::NG before 2.16.1. Weak session ID generation in the AuthBasic handler and incorrect failure handling during a password check allow attackers to bypass 2FA verification. Any plugin that tries to deny session creation after the store step does not deny an AuthBasic session.

A vulnerability in Trend Micro InterScan Web Security Virtual Appliance 6.5 SP2 could allow an attacker to manipulate system updates using a combination of CSRF bypass (CVE-2020-8461) and authentication bypass (CVE-2020-8464) to execute code as user root.

The Synergy Systems & Solutions PLC & RTU system has a vulnerability in HUSKY RTU 6049-E70 firmware versions 5.0 and prior. The affected product does not require adequate authentication, which may allow an attacker to read sensitive information or execute arbitrary code. This is a different issue than CVE-2019-16879 and CVE-2019-20045.

An issue was discovered in phpABook 0.9 Intermediate. On the login page, if one sets a userInfo cookie with the value of admin+1+en (user+perms+lang), one can login as any user without a password.

The Time Capsule plugin before 1.21.16 for WordPress has an authentication bypass. Any request containing IWP_JSON_PREFIX causes the client to be logged in as the first account on the list of administrator accounts.

eG Manager 7.1.2 allows authentication bypass via a com.egurkha.EgLoginServlet?uname=admin&upass=&accessKey=eGm0n1t0r request.

HTCondor up to and including stable series 8.8.6 and development series 8.9.4 has Incorrect Access Control. It is possible to use a different authentication method to submit a job than the administrator has specified. If the administrator has configured the READ or WRITE methods to include CLAIMTOBE, then it is possible to impersonate another user to the condor_schedd. (For example to submit or remove jobs)

A vulnerability has been identified in Control Center Server (CCS) (All versions < V1.5.0). The Control Center Server (CCS) contains an authentication bypass vulnerability in its XML-based communication protocol as provided by default on ports 5444/tcp and 5440/tcp. A remote attacker with network access to the CCS server could exploit this vulnerability to read the CCS users database, including the passwords of all users in obfuscated cleartext.

Huawei products IPS Module; NGFW Module; NIP6300; NIP6600; NIP6800; Secospace USG6300; Secospace USG6500; Secospace USG6600; USG9500 with versions of V500R001C00; V500R001C20; V500R001C30; V500R001C50; V500R001C60; V500R001C80; V500R005C00; V500R005C10; V500R005C20; V500R002C00; V500R002C10; V500R002C20; V500R002C30 have an improper authentication vulnerability. Attackers need to perform some operations to exploit the vulnerability. Successful exploit may obtain certain permissions on the device.

In all versions of ABB Power Generation Information Manager (PGIM) and Plant Connect, the affected product is vulnerable to authentication bypass, which may allow an attacker to remotely bypass authentication and extract credentials from the affected device.

An Authentication Bypass Vulnerability exists in DELL SonicWALL Analyzer 7.0, Global Management System (GMS) 4.1, 5.0, 5.1, 6.0, and 7.0; Universal Management Appliance (UMA) 5.1, 6.0, and 7.0 and ViewPoint 4.1, 5.0, 5.1, and 6.0 via the skipSessionCheck parameter to the UMA interface (/appliance/), which could let a remote malicious user obtain access to the root account.

A vulnerability classified as critical was found in Telecommunication Software SAMwin Contact Center Suite 5.1. This vulnerability affects the function passwordScramble in the library SAMwinLIBVB.dll of the component Password Handler. Incorrect implementation of a hashing function leads to predictable authentication possibilities. Upgrading to version 6.2 is able to address this issue. It is recommended to upgrade the affected component.

A Improper Authentication vulnerability in cryptctl of SUSE Linux Enterprise Server for SAP 12-SP5, SUSE Manager Server 4.0 allows attackers with access to the hashed password to use it without having to crack it. This issue affects: SUSE Linux Enterprise Server for SAP 12-SP5 cryptctl versions prior to 2.4. SUSE Manager Server 4.0 cryptctl versions prior to 2.4.

An Authentication Bypass vulnerability exists in DELL SonicWALL Global Management System (GMS) 4.1, 5.0, 5.1, 6.0, and 7.0, Analyzer 7.0, Universal Management Appliance (UMA) 5.1, 6.0, and 7.0 and ViewPoint 4.1, 5.0, and 6.0 via a crafted request to the SGMS interface, which could let a remote malicious user obtain administrative access.

A vulnerability, which was classified as very critical, was found in Netgear DGND3700 1.1.00.15_1.00.15NA. This affects an unknown part of the file /BRS_top.html of the component Basic Authentication. The manipulation leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. Other products might be affected as well. The vendor was contacted early about this disclosure.

CA Automic Sysload 5.6.0 through 6.1.2 contains a vulnerability, related to a lack of authentication on the File Server port, that potentially allows remote attackers to execute arbitrary commands.

The server management software module of ZTE has an authentication issue vulnerability, which allows users to skip the authentication of the server and execute some commands for high-level users. This affects: <R5300G4V03.08.0100/V03.07.0300/V03.07.0200/V03.07.0108/V03.07.0100/V03.05.0047/V03.05.0046/V03.05.0045/V03.05.0044/V03.05.0043/V03.05.0040/V03.04.0020;R8500G4V03.07.0103/V03.07.0101/V03.06.0100/V03.05.0400/V03.05.0020;R5500G4V03.08.0100/V03.07.0200/V03.07.0100/V03.06.0100>

The web server in ABB Telephone Gateway TG/S 3.2 and Busch-Jaeger 6186/11 Telefon-Gateway allows access to different endpoints of the application without authenticating by accessing a specific uniform resource locator (URL) , violating the access-control (ACL) rules. This issue allows obtaining sensitive information that may aid in further attacks and privilege escalation.

The device does not properly authenticate users and the potential exists for a remote user to upload a new firmware image to the Ethernet card, whether it is a corrupt or legitimate firmware image. Successful exploitation of this vulnerability could cause loss of availability, integrity, and confidentiality and a disruption in communications with other connected devices. Rockwell Automation EtherNet/IP products; 1756-ENBT, 1756-EWEB, 1768-ENBT, and 1768-EWEB communication modules; CompactLogix L32E and L35E controllers; 1788-ENBT FLEXLogix adapter; 1794-AENTR FLEX I/O EtherNet/IP adapter; ControlLogix 18 and earlier; CompactLogix 18 and earlier; GuardLogix 18 and earlier; SoftLogix 18 and earlier; CompactLogix controllers 19 and earlier; SoftLogix controllers 19 and earlier; ControlLogix controllers 20 and earlier; GuardLogix controllers 20 and earlier; and MicroLogix 1100 and 1400

CWE-287: Improper Authentication vulnerability exists which could cause the execution of commands on the webserver without authentication when sending specially crafted HTTP requests.

A security vulnerability has been identified in the HPE Edgeline Infrastructure Manager, also known as HPE Edgeline Infrastructure Management Software. The vulnerability could be remotely exploited to bypass remote authentication leading to execution of arbitrary commands, gaining privileged access, causing denial of service, and changing the configuration.

A vulnerability has been identified in SPPA-T3000 Application Server (All versions < Service Pack R8.2 SP2). The AdminService is available without authentication on the Application Server. An attacker can use methods exposed via this interface to receive password hashes of other users and to change user passwords. Please note that an attacker needs to have access to the Application Highway in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.

SSMC3.7.0.0 is vulnerable to remote authentication bypass. HPE StoreServ Management Console (SSMC) 3.7.0.0 is an off node multiarray manager web application and remains isolated from data on the managed arrays. HPE has provided an update to HPE StoreServ Management Console (SSMC) software 3.7.0.0* Upgrade to HPE 3PAR StoreServ Management Console 3.7.1.1 or later.

An Improper Authentication vulnerability in upload-file.php, used by the J-Web component of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to upload arbitrary files to temporary folders on the device. This issue affects Juniper Networks Junos OS: All versions prior to 19.4R3-S11; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S7; 20.3 version 20.3R1 and later versions; 20.4 versions prior to 20.4R3-S6; 21.1 version 21.1R1 and later versions; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R3-S1; 22.2 versions prior to 22.2R2-S1, 22.2R3; 22.3 versions prior to 22.3R1-S2, 22.3R2.

Lorex LNC116 and LNC104 IP Cameras have a Remote Authentication Bypass Vulnerability